FIX: Correction of ACL perf test suite documentation
[csit.git] / tests / vpp / perf / ip4 / 10ge2p1x520-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
19 | ... | OACL | ACL1 | 10k_FLOWS
20 | ...
21 | Suite Setup | Run Keywords
22 | ... | Set up 3-node performance topology with DUT's NIC model | L3
23 | ... | Intel-X520-DA2
24 | ... | AND | Set up performance test suite with ACL
25 | Suite Teardown | Tear down 3-node performance topology
26 | ...
27 | Test Setup | Set up performance test
28 | ...
29 | Test Teardown | Tear down performance test with ACL
30 | ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
31 | ...
32 | Test Template | Local Template
33 | ...
34 | Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
35 | ...
36 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
37 | ... | with single links between nodes.
38 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
39 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4\
40 | ... | routing and one static IPv4 /24 route entries. Required ACL rules are\
41 | ... | applied to output paths of both DUT1 intefaces. DUT1 and DUT2 are tested\
42 | ... | with 2p10GE NIC X520 Niantic by Intel.\
43 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
44 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
45 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
46 | ... | of packets transmitted. NDR and PDR are discovered for different
47 | ... | Ethernet L2 frame sizes using MLRsearch library.
48 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
49 | ... | contains two L3 flow-groups (flow-group per direction, ${flows_per_dir}
50 | ... | flows per flow-group) with all packets containing Ethernet header, IPv4
51 | ... | header with IP protocol=61 and static payload. MAC addresses are
52 | ... | matching MAC addresses of the TG node interfaces.
53 | ... | *[Ref] Applicable standard specifications:* RFC2544.
54
55 *** Variables ***
56 # X520-DA2 bandwidth limit
57 | ${s_limit}= | ${10000000000}
58
59 # ACL test setup
60 | ${acl_action}= | permit+reflect
61 | ${acl_apply_type}= | output
62 | ${no_hit_aces_number}= | 1
63 | ${flows_per_dir}= | 10k
64
65 # starting points for non-hitting ACLs
66 | ${src_ip_start}= | 30.30.30.1
67 | ${dst_ip_start}= | 40.40.40.1
68 | ${ip_step}= | ${1}
69 | ${sport_start}= | ${1000}
70 | ${dport_start}= | ${1000}
71 | ${port_step}= | ${1}
72 | ${trex_stream1_subnet}= | 10.10.10.0/24
73 | ${trex_stream2_subnet}= | 20.20.20.0/24
74
75 | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u1000p-conc
76
77 *** Keywords ***
78 | Local Template
79 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
80 | | ...
81 | | Set Test Variable | ${framesize}
82 | | Set Test Variable | ${min_rate} | ${10000}
83 | | ...
84 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
85 | | And Add PCI devices to all DUTs
86 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
87 | | ... | ${s_limit} | ${framesize}
88 | | And Apply startup configuration on all VPP DUTs
89 | | ${ip_nr}= | Set Variable | 10
90 | | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
91 | | Then Find NDR and PDR intervals using optimized search
92 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
93
94 *** Test Cases ***
95 | tc01-64B-1c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
96 | | [Tags] | 64B | 1C
97 | | framesize=${64} | phy_cores=${1}
98
99 | tc02-64B-2c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
100 | | [Tags] | 64B | 2C
101 | | framesize=${64} | phy_cores=${2}
102
103 | tc03-64B-4c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
104 | | [Tags] | 64B | 4C
105 | | framesize=${64} | phy_cores=${4}
106
107 | tc04-1518B-1c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
108 | | [Tags] | 1518B | 1C
109 | | framesize=${1518} | phy_cores=${1}
110
111 | tc05-1518B-2c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
112 | | [Tags] | 1518B | 2C
113 | | framesize=${1518} | phy_cores=${2}
114
115 | tc06-1518B-4c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
116 | | [Tags] | 1518B | 4C
117 | | framesize=${1518} | phy_cores=${4}
118
119 | tc07-9000B-1c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
120 | | [Tags] | 9000B | 1C
121 | | framesize=${9000} | phy_cores=${1}
122
123 | tc08-9000B-2c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
124 | | [Tags] | 9000B | 2C
125 | | framesize=${9000} | phy_cores=${2}
126
127 | tc09-9000B-4c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
128 | | [Tags] | 9000B | 4C
129 | | framesize=${9000} | phy_cores=${4}
130
131 | tc10-IMIX-1c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
132 | | [Tags] | IMIX | 1C
133 | | framesize=IMIX_v4_1 | phy_cores=${1}
134
135 | tc11-IMIX-2c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
136 | | [Tags] | IMIX | 2C
137 | | framesize=IMIX_v4_1 | phy_cores=${2}
138
139 | tc12-IMIX-4c-ethip4udp-ip4base-oacl1sf-10kflows-ndrpdr
140 | | [Tags] | IMIX | 4C
141 | | framesize=IMIX_v4_1 | phy_cores=${4}