CSIT-1097: Migrate ip4 to NDRPDR and edit MRR
[csit.git] / tests / vpp / perf / ip4 / 10ge2p1x520-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Resource | resources/libraries/robot/ip/nat.robot
17 | Resource | resources/libraries/robot/shared/traffic.robot
18 | ...
19 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
20 | ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | NAT44 | SRC_USER_100
21 | ... | SCALE
22 | ...
23 | Suite Setup | Run Keywords
24 | ... | Set up 3-node performance topology with DUT's NIC model | L3
25 | ... | Intel-X520-DA2
26 | ... | AND | Set up performance test suite with NAT
27 | Suite Teardown | Tear down 3-node performance topology
28 | ...
29 | Test Setup | Set up performance test
30 | ...
31 | Test Teardown | Tear down performance discovery test with NAT
32 | ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
33 | ...
34 | Test Template | Local Template
35 | ...
36 | Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
37 | ...
38 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
39 | ... | with single links between nodes.
40 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
41 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
42 | ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
43 | ... | tested with 2p10GE NIC X520 Niantic by Intel.
44 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
45 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
46 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
47 | ... | of packets transmitted. NDR and PDR are discovered for different
48 | ... | Ethernet L2 frame sizes using MLRsearch library.
49 | ... | Test packets are generated by TG on
50 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
51 | ... | (flow-group per direction, one flow per flow-group) with all packets
52 | ... | containing Ethernet header, IPv4 header with UDP header and static
53 | ... | payload. MAC addresses are matching MAC addresses of the TG node
54 | ... | interfaces.
55 | ... | *[Ref] Applicable standard specifications:* RFC2544.
56
57 *** Variables ***
58 # X520-DA2 bandwidth limit
59 | ${s_limit} | ${10000000000}
60 # Traffic profile:
61 | ${traffic_profile} | trex-sl-3n-ethip4udp-100u15p
62
63 *** Keywords ***
64 | Local Template
65 | | [Documentation] | FIXME.
66 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
67 | | ...
68 | | Set Test Variable | ${framesize}
69 | | Set Test Variable | ${min_rate} | ${10000}
70 | | ...
71 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
72 | | And Add PCI devices to all DUTs
73 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
74 | | ... | ${s_limit} | ${framesize}
75 | | And Add NAT to all DUTs
76 | | And Apply startup configuration on all VPP DUTs
77 | | When Initialize NAT44 in 3-node circular topology
78 | | Then Find NDR and PDR intervals using optimized search
79 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
80
81 *** Test Cases ***
82 | tc01-64B-1c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
83 | | [Tags] | 64B | 1C
84 | | framesize=${64} | phy_cores=${1}
85
86 | tc02-64B-2c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
87 | | [Tags] | 64B | 2C
88 | | framesize=${64} | phy_cores=${2}
89
90 | tc03-64B-4c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
91 | | [Tags] | 64B | 4C
92 | | framesize=${64} | phy_cores=${4}
93
94 | tc04-1518B-1c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
95 | | [Tags] | 1518B | 1C
96 | | framesize=${1518} | phy_cores=${1}
97
98 | tc05-1518B-2c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
99 | | [Tags] | 1518B | 2C
100 | | framesize=${1518} | phy_cores=${2}
101
102 | tc06-1518B-4c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
103 | | [Tags] | 1518B | 4C
104 | | framesize=${1518} | phy_cores=${4}
105
106 | tc07-9000B-1c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
107 | | [Tags] | 9000B | 1C
108 | | framesize=${9000} | phy_cores=${1}
109
110 | tc08-9000B-2c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
111 | | [Tags] | 9000B | 2C
112 | | framesize=${9000} | phy_cores=${2}
113
114 | tc09-9000B-4c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
115 | | [Tags] | 9000B | 4C
116 | | framesize=${9000} | phy_cores=${4}
117
118 | tc10-IMIX-1c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
119 | | [Tags] | IMIX | 1C
120 | | framesize=IMIX_v4_1 | phy_cores=${1}
121
122 | tc11-IMIX-2c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
123 | | [Tags] | IMIX | 2C
124 | | framesize=IMIX_v4_1 | phy_cores=${2}
125
126 | tc12-IMIX-4c-ethip4udp-ip4scale100-udpsrcscale15-nat44-ndrpdr
127 | | [Tags] | IMIX | 4C
128 | | framesize=IMIX_v4_1 | phy_cores=${4}