Remove leading tc[nn] from test names
[csit.git] / tests / vpp / perf / ip4 / 10ge2p1x710-ethip4-ip4base-ipolicemarkbase-ndrpdr.robot
1 # Copyright (c) 2020 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 | Library | resources.libraries.python.Policer
17 |
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
19 | ... | NIC_Intel-X710 | IP4FWD | FEATURE | POLICE_MARK | DRV_VFIO_PCI
20 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
21 | ... | ethip4-ip4base-ipolicemarkbase
22 |
23 | Suite Setup | Setup suite topology interfaces | performance
24 | Suite Teardown | Tear down suite | performance
25 | Test Setup | Setup test | performance
26 | Test Teardown | Tear down test | performance | classify
27 |
28 | Test Template | Local Template
29 |
30 | Documentation | *RFC2544: Pkt throughput IPv4 policer test cases*
31 |
32 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
33 | ... | with single links between nodes.
34 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
35 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
36 | ... | routing and two static IPv4 /24 route entries and policer with 2R3C
37 | ... | color-aware configuration. Policer is applied on links TG - DUT1 and
38 | ... | DUT2 - TG. DUT1 and DUT2 tested with ${nic_name}.\
39 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
40 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
41 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
42 | ... | of packets transmitted. NDR and PDR are discovered for different\
43 | ... | Ethernet L2 frame sizes using MLRsearch library.\
44 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
45 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
46 | ... | flow-group) with all packets containing Ethernet header, IPv6 header
47 | ... | and generated payload. MAC addresses are matching MAC addresses
48 | ... | of the TG node interfaces.
49 | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698.
50
51 *** Variables ***
52 | @{plugins_to_enable}= | dpdk_plugin.so
53 | ${crypto_type}= | ${None}
54 | ${nic_name}= | Intel-X710
55 | ${nic_driver}= | vfio-pci
56 | ${nic_rxq_size}= | 0
57 | ${nic_txq_size}= | 0
58 | ${nic_pfs}= | 2
59 | ${nic_vfs}= | 0
60 | ${osi_layer}= | L3
61 | ${overhead}= | ${0}
62 | ${cir}= | ${100}
63 | ${eir}= | ${150}
64 | ${dscp}= | AF22
65 # Traffic profile:
66 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
67
68 *** Keywords ***
69 | Local Template
70 | | [Documentation]
71 | | ... | [Cfg] DUT runs IPv4 routing config.
72 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
73 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
74 | |
75 | | ... | *Arguments:*
76 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
77 | | ... | Type: integer, string
78 | | ... | - phy_cores - Number of physical cores. Type: integer
79 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
80 | |
81 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
82 | |
83 | | ${cb}= | Get Average Frame Size | ${frame_size}
84 | | ${eb}= | Get Average Frame Size | ${frame_size}
85 | |
86 | | Set Test Variable | \${frame_size}
87 | | Set Test Variable | \${cb}
88 | | Set Test Variable | \${eb}
89 | |
90 | | Given Set Max Rate And Jumbo
91 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
92 | | And Pre-initialize layer driver | ${nic_driver}
93 | | And Apply startup configuration on all VPP DUTs
94 | | When Initialize layer driver | ${nic_driver}
95 | | And Initialize layer interface
96 | | And Initialize IPv4 forwarding in circular topology
97 | | And Initialize IPv4 policer 2r3c-'ca' in circular topology
98 | | Then Find NDR and PDR intervals using optimized search
99
100 *** Test Cases ***
101 | 64B-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr
102 | | [Tags] | 64B | 1C
103 | | frame_size=${64} | phy_cores=${1}
104
105 | 64B-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr
106 | | [Tags] | 64B | 2C
107 | | frame_size=${64} | phy_cores=${2}
108
109 | 64B-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr
110 | | [Tags] | 64B | 4C
111 | | frame_size=${64} | phy_cores=${4}
112
113 | 1518B-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr
114 | | [Tags] | 1518B | 1C
115 | | frame_size=${1518} | phy_cores=${1}
116
117 | 1518B-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr
118 | | [Tags] | 1518B | 2C
119 | | frame_size=${1518} | phy_cores=${2}
120
121 | 1518B-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr
122 | | [Tags] | 1518B | 4C
123 | | frame_size=${1518} | phy_cores=${4}
124
125 | 9000B-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr
126 | | [Tags] | 9000B | 1C
127 | | frame_size=${9000} | phy_cores=${1}
128
129 | 9000B-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr
130 | | [Tags] | 9000B | 2C
131 | | frame_size=${9000} | phy_cores=${2}
132
133 | 9000B-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr
134 | | [Tags] | 9000B | 4C
135 | | frame_size=${9000} | phy_cores=${4}
136
137 | IMIX-1c-ethip4-ip4base-ipolicemarkbase-ndrpdr
138 | | [Tags] | IMIX | 1C
139 | | frame_size=IMIX_v4_1 | phy_cores=${1}
140
141 | IMIX-2c-ethip4-ip4base-ipolicemarkbase-ndrpdr
142 | | [Tags] | IMIX | 2C
143 | | frame_size=IMIX_v4_1 | phy_cores=${2}
144
145 | IMIX-4c-ethip4-ip4base-ipolicemarkbase-ndrpdr
146 | | [Tags] | IMIX | 4C
147 | | frame_size=IMIX_v4_1 | phy_cores=${4}