Add ARM Taishan testbed33 perftest
[csit.git] / tests / vpp / perf / ip4 / 10ge2p1x82599es-ethip4udp-ip4base-nat44-ndrpdr.robot
1 # Copyright (c) 2019 PANTHEON.tech and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Resource | resources/libraries/robot/ip/nat.robot
17 | Resource | resources/libraries/robot/shared/traffic.robot
18 | ...
19 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
20 | ... | NIC_Intel-82599ES | ETH | IP4FWD | FEATURE | NAT44 | BASE
21 | ...
22 | Suite Setup | Run Keywords
23 | ... | Set up 3-node performance topology with DUT's NIC model | L3
24 | ... | Intel-82599ES
25 | ... | AND | Set up performance test suite with NAT
26 | Suite Teardown | Tear down 3-node performance topology
27 | ...
28 | Test Setup | Set up performance test
29 | ...
30 | Test Teardown | Tear down performance discovery test | ${min_rate}pps
31 | ... | ${framesize} | ${traffic_profile}
32 | ...
33 | Test Template | Local Template
34 | ...
35 | Documentation | *RFC2544: Pkt throughput NAT44 performance test cases*
36 | ...
37 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
38 | ... | with single links between nodes.
39 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
40 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
41 | ... | routing and two static IPv4 /24 and IPv4/20 route entries. DUT1 and DUT2
42 | ... | tested with 2p10GE NIC 82599ES by Intel.
43 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
44 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
45 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
46 | ... | of packets transmitted. NDR and PDR are discovered for different
47 | ... | Ethernet L2 frame sizes using MLRsearch library.
48 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
49 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
50 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
51 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
52 | ... | addresses of the TG node interfaces.
53 | ... | *[Ref] Applicable standard specifications:* RFC2544.
54
55 *** Variables ***
56 # 82599ES bandwidth limit
57 | ${s_limit}= | ${10000000000}
58 # Traffic profile:
59 | ${traffic_profile}= | trex-sl-3n-ethip4udp-1u1p
60
61 *** Keywords ***
62 | Local Template
63 | | ...
64 | | [Documentation]
65 | | ... | [Cfg] DUT runs IPv4 routing config.
66 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
67 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
68 | | ...
69 | | ... | *Arguments:*
70 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
71 | | ... | Type: integer, string
72 | | ... | - phy_cores - Number of physical cores. Type: integer
73 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
74 | | ...
75 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
76 | | ...
77 | | Set Test Variable | ${framesize}
78 | | Set Test Variable | ${min_rate} | ${10000}
79 | | ...
80 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
81 | | And Add PCI devices to all DUTs
82 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
83 | | ... | ${s_limit} | ${framesize}
84 | | And Add NAT to all DUTs
85 | | And Apply startup configuration on all VPP DUTs
86 | | When Initialize NAT44 in circular topology
87 | | Then Find NDR and PDR intervals using optimized search
88 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
89
90 *** Test Cases ***
91 | tc01-64B-1c-ethip4udp-ip4base-nat44-ndrpdr
92 | | [Tags] | 64B | 1C
93 | | framesize=${64} | phy_cores=${1}
94
95 | tc02-64B-2c-ethip4udp-ip4base-nat44-ndrpdr
96 | | [Tags] | 64B | 2C
97 | | framesize=${64} | phy_cores=${2}
98
99 | tc03-64B-4c-ethip4udp-ip4base-nat44-ndrpdr
100 | | [Tags] | 64B | 4C
101 | | framesize=${64} | phy_cores=${4}
102
103 | tc04-1518B-1c-ethip4udp-ip4base-nat44-ndrpdr
104 | | [Tags] | 1518B | 1C
105 | | framesize=${1518} | phy_cores=${1}
106
107 | tc05-1518B-2c-ethip4udp-ip4base-nat44-ndrpdr
108 | | [Tags] | 1518B | 2C
109 | | framesize=${1518} | phy_cores=${2}
110
111 | tc06-1518B-4c-ethip4udp-ip4base-nat44-ndrpdr
112 | | [Tags] | 1518B | 4C
113 | | framesize=${1518} | phy_cores=${4}
114
115 | tc07-9000B-1c-ethip4udp-ip4base-nat44-ndrpdr
116 | | [Tags] | 9000B | 1C
117 | | framesize=${9000} | phy_cores=${1}
118
119 | tc08-9000B-2c-ethip4udp-ip4base-nat44-ndrpdr
120 | | [Tags] | 9000B | 2C
121 | | framesize=${9000} | phy_cores=${2}
122
123 | tc09-9000B-4c-ethip4udp-ip4base-nat44-ndrpdr
124 | | [Tags] | 9000B | 4C
125 | | framesize=${9000} | phy_cores=${4}
126
127 | tc10-IMIX-1c-ethip4udp-ip4base-nat44-ndrpdr
128 | | [Tags] | IMIX | 1C
129 | | framesize=IMIX_v4_1 | phy_cores=${1}
130
131 | tc11-IMIX-2c-ethip4udp-ip4base-nat44-ndrpdr
132 | | [Tags] | IMIX | 2C
133 | | framesize=IMIX_v4_1 | phy_cores=${2}
134
135 | tc12-IMIX-4c-ethip4udp-ip4base-nat44-ndrpdr
136 | | [Tags] | IMIX | 4C
137 | | framesize=IMIX_v4_1 | phy_cores=${4}