Perf: Add perfmon_plugin for telemetry
[csit.git] / tests / vpp / perf / ip4 / 2n1l-10ge2p1x710-ethip4-ip4scale2m-rnd-ndrpdr.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | IP4FWD | SCALE | FIB_2M | DRV_VFIO_PCI
19 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
20 | ... | IP4_RND
21 | ... | ethip4-ip4scale2m-rnd
22 |
23 | Suite Setup | Setup suite topology interfaces | performance
24 | Suite Teardown | Tear down suite | performance
25 | Test Setup | Setup test | performance
26 | Test Teardown | Tear down test | performance
27 |
28 | Test Template | Local Template
29 |
30 | Documentation | *RFC2544: Pkt throughput IPv4 routing test cases*
31 |
32 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
33 | ... | with single links between nodes.
34 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
35 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and\
36 | ... | 2x1M static IPv4 /32 route entries. DUT1 is tested with ${nic_name}.\
37 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
38 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
39 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
40 | ... | of packets transmitted. NDR and PDR are discovered for different\
41 | ... | Ethernet L2 frame sizes using MLRsearch library.\
42 | ... | Test packets are generated by TG on links to DUT1. TG traffic profile\
43 | ... | contains 2 randomized L3 flow-groups (flow-group per direction, 1M\
44 | ... | flows per flow-group) with all packets containing Ethernet header,\
45 | ... | IPv4 header with IP protocol=61 and static payload. MAC addresses are\
46 | ... | matching MAC addresses of the TG node interfaces.
47 | ... | *[Ref] Applicable standard specifications:* RFC2544.
48
49
50 *** Variables ***
51 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
52 | ${crypto_type}= | ${None}
53 | ${nic_name}= | Intel-X710
54 | ${nic_driver}= | vfio-pci
55 | ${nic_rxq_size}= | 0
56 | ${nic_txq_size}= | 0
57 | ${nic_pfs}= | 2
58 | ${nic_vfs}= | 0
59 | ${osi_layer}= | L3
60 | ${overhead}= | ${0}
61 | ${rts_per_flow}= | ${1000000}
62 # Traffic profile
63 | ${traffic_profile}= | trex-stl-ethip4-ip4dst-rnd${rts_per_flow}
64
65 *** Keywords ***
66 | Local Template
67 | |
68 | | [Documentation]
69 | | ... | [Cfg] DUT runs IPv4 routing config.
70 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
71 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
72 | |
73 | | ... | *Arguments:*
74 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
75 | | ... | Type: integer, string
76 | | ... | - phy_cores - Number of physical cores. Type: integer
77 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
78 | | ...
79 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
80 | |
81 | | Set Test Variable | \${frame_size}
82 | |
83 | | Given Set Max Rate And Jumbo
84 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
85 | | And Pre-initialize layer driver | ${nic_driver}
86 | | And Apply startup configuration on all VPP DUTs
87 | | When Initialize layer driver | ${nic_driver}
88 | | And Initialize layer interface
89 | | And Initialize IPv4 forwarding with scaling in circular topology
90 | | ... | ${rts_per_flow}
91 | | Then Find NDR and PDR intervals using optimized search
92
93 *** Test Cases ***
94 | 64B-1c-ethip4-ip4scale2m-rnd-ndrpdr
95 | | [Tags] | 64B | 1C
96 | | frame_size=${64} | phy_cores=${1}
97
98 | 64B-2c-ethip4-ip4scale2m-rnd-ndrpdr
99 | | [Tags] | 64B | 2C
100 | | frame_size=${64} | phy_cores=${2}
101
102 | 64B-4c-ethip4-ip4scale2m-rnd-ndrpdr
103 | | [Tags] | 64B | 4C
104 | | frame_size=${64} | phy_cores=${4}
105
106 | 1518B-1c-ethip4-ip4scale2m-rnd-ndrpdr
107 | | [Tags] | 1518B | 1C
108 | | frame_size=${1518} | phy_cores=${1}
109
110 | 1518B-2c-ethip4-ip4scale2m-rnd-ndrpdr
111 | | [Tags] | 1518B | 2C
112 | | frame_size=${1518} | phy_cores=${2}
113
114 | 1518B-4c-ethip4-ip4scale2m-rnd-ndrpdr
115 | | [Tags] | 1518B | 4C
116 | | frame_size=${1518} | phy_cores=${4}
117
118 | 9000B-1c-ethip4-ip4scale2m-rnd-ndrpdr
119 | | [Tags] | 9000B | 1C
120 | | frame_size=${9000} | phy_cores=${1}
121
122 | 9000B-2c-ethip4-ip4scale2m-rnd-ndrpdr
123 | | [Tags] | 9000B | 2C
124 | | frame_size=${9000} | phy_cores=${2}
125
126 | 9000B-4c-ethip4-ip4scale2m-rnd-ndrpdr
127 | | [Tags] | 9000B | 4C
128 | | frame_size=${9000} | phy_cores=${4}
129
130 | IMIX-1c-ethip4-ip4scale2m-rnd-ndrpdr
131 | | [Tags] | IMIX | 1C
132 | | frame_size=IMIX_v4_1 | phy_cores=${1}
133
134 | IMIX-2c-ethip4-ip4scale2m-rnd-ndrpdr
135 | | [Tags] | IMIX | 2C
136 | | frame_size=IMIX_v4_1 | phy_cores=${2}
137
138 | IMIX-4c-ethip4-ip4scale2m-rnd-ndrpdr
139 | | [Tags] | IMIX | 4C
140 | | frame_size=IMIX_v4_1 | phy_cores=${4}