doc: fixing documentation structure
[csit.git] / tests / vpp / perf / ip4 / 2n1l-10ge2p1x710-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | IP4FWD | IP4BASE | TCP | TCP_CPS | DRV_VFIO_PCI
19 | ... | SCALE | HOSTS_4096 | RXQ_SIZE_0 | TXQ_SIZE_0
20 | ... | ethip4tcp-ip4base-h4096-p63-s258048-cps
21 |
22 | Suite Setup | Setup suite topology interfaces | performance
23 | Suite Teardown | Tear down suite | performance
24 | Test Setup | Setup test | performance
25 | Test Teardown | Tear down test | performance
26 |
27 | Test Template | Local Template
28 |
29 | Documentation | **CPS on empty TCP transactions with IPv4 routing**
30 | ... |
31 | ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
32 | ... | with single links between nodes.
33 | ... |
34 | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-TCP for IPv4 routing.
35 | ... |
36 | ... | - **[Cfg] DUT configuration:** DUT1 is configured with IPv4. \
37 | ... | routing and two static IPv4 /24 route entries. DUT1 is tested with \
38 | ... | with ${nic_name}.
39 | ... |
40 | ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
41 | ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
42 | ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
43 | ... | expressed in percentage of packets transmitted. NDR and PDR are \
44 | ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
45 | ... | library.
46 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
47 | ... | contain L7 flows (${cps} bi-directional TCP flows) with all packets \
48 | ... | containing Ethernet header, IPv4 header with TCP header and static \
49 | ... | payload. MAC addresses are matching MAC addresses of the TG node \
50 | ... | interfaces.
51 | ... |
52 | ... | - **[Ref] Applicable standard specifications:** RFC2544.
53
54 *** Variables ***
55 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
56 | ${crypto_type}= | ${None}
57 | ${nic_name}= | Intel-X710
58 | ${nic_driver}= | vfio-pci
59 | ${nic_rxq_size}= | 0
60 | ${nic_txq_size}= | 0
61 | ${nic_pfs}= | 2
62 | ${nic_vfs}= | 0
63 | ${osi_layer}= | L7
64 | ${overhead}= | ${0}
65 # Scale settings
66 | ${n_hosts}= | ${4096}
67 | ${n_ports}= | ${63}
68 | ${transaction_scale}= | ${${n_hosts} * ${n_ports}}
69 | ${packets_per_transaction_and_direction}= | ${4}
70 | ${packets_per_transaction_aggregated}= | ${7}
71 # Traffic profile
72 | ${traffic_profile}= | trex-astf-ethip4tcp-${n_hosts}h
73 | ${transaction_type}= | tcp_cps
74 | ${disable_latency}= | ${True}
75
76 *** Keywords ***
77 | Local Template
78 | | [Documentation]
79 | | ... | - **[Cfg]** DUT runs IPv4 routing config. \
80 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
81 | | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
82 | |
83 | | ... | *Arguments:*
84 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
85 | | ... | Type: integer, string
86 | | ... | - phy_cores - Number of physical cores. Type: integer
87 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
88 | |
89 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
90 | |
91 | | Set Test Variable | \${frame_size}
92 | | ${pre_stats}= | Create List
93 | | ... | vpp-clear-stats | vpp-enable-packettrace | vpp-enable-elog
94 | | ... | vpp-clear-runtime
95 | | Set Test Variable | ${pre_stats}
96 | | ${post_stats}= | Create List
97 | | ... | vpp-show-stats | vpp-show-packettrace | vpp-show-elog
98 | | ... | vpp-show-runtime
99 | | Set Test Variable | ${post_stats}
100 | |
101 | | Given Set Max Rate And Jumbo
102 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
103 | | And Pre-initialize layer driver | ${nic_driver}
104 | | And Apply startup configuration on all VPP DUTs
105 | | When Initialize layer driver | ${nic_driver}
106 | | And Initialize layer interface
107 | | And Initialize IPv4 forwarding in circular topology
108 | | ... | 192.168.0.0 | 20.0.0.0 | ${20}
109 | | Then Find NDR and PDR intervals using optimized search
110
111 *** Test Cases ***
112 | 64B-1c-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr
113 | | [Tags] | 64B | 1C
114 | | frame_size=${64} | phy_cores=${1}
115
116 | 64B-2c-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr
117 | | [Tags] | 64B | 2C
118 | | frame_size=${64} | phy_cores=${2}
119
120 | 64B-4c-ethip4tcp-ip4base-h4096-p63-s258048-cps-ndrpdr
121 | | [Tags] | 64B | 4C
122 | | frame_size=${64} | phy_cores=${4}