feat(api): Use newest API messages after rls2402
[csit.git] / tests / vpp / perf / ip4 / 2n1l-10ge2p1x710-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr.robot
1 # Copyright (c) 2020 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 | Resource | resources/libraries/robot/ip/nat.robot
17 | Resource | resources/libraries/robot/shared/traffic.robot
18 |
19 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
20 | ... | NIC_Intel-X710 | ETH | IP4FWD | FEATURE | NAT44 | UDP | UDP_CPS
21 | ... | NAT44_ENDPOINT_DEPENDENT | SCALE | HOSTS_16384 | DRV_VFIO_PCI
22 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
23 | ... | ethip4udp-nat44ed-h16384-p63-s1032192-cps
24 |
25 | Suite Setup | Setup suite topology interfaces | performance
26 | Suite Teardown | Tear down suite | performance
27 | Test Setup | Setup test | performance
28 | Test Teardown | Tear down test | performance | nat-ed
29 |
30 | Test Template | Local Template
31 |
32 | Documentation | *CPS on empty UDP transactions with NAT44ED*
33 |
34 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
35 | ... | with single links between nodes.
36 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for IPv4 routing.
37 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and
38 | ... | one static IPv4 /${dest_mask} route entries.
39 | ... | DUT1 is tested with ${nic_name}.\
40 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
41 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
42 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
43 | ... | of packets transmitted. NDR and PDR are discovered for different\
44 | ... | Ethernet L2 frame sizes using MLRsearch library.\
45 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
46 | ... | contain L7 flows (${cps} bi-directional UDP flows) with all packets\
47 | ... | containing Ethernet header, IPv4 header with UDP header and static\
48 | ... | payload. MAC addresses are matching MAC addresses of the TG node\
49 | ... | interfaces.
50 | ... | *[Ref] Applicable standard specifications:* Benchmarking Methodology\
51 | ... | for Network Security Device Performance\
52 | ... | (draft-ietf-bmwg-ngfw-performance-03).
53
54 *** Variables ***
55 | @{plugins_to_enable}= | dpdk_plugin.so | nat_plugin.so
56 | ${crypto_type}= | ${None}
57 | ${nic_name}= | Intel-X710
58 | ${nic_driver}= | vfio-pci
59 | ${nic_rxq_size}= | 0
60 | ${nic_txq_size}= | 0
61 | ${nic_pfs}= | 2
62 | ${nic_vfs}= | 0
63 | ${osi_layer}= | L7
64 | ${overhead}= | ${0}
65 # IP settings
66 | ${tg_if1_ip4}= | 10.0.0.2
67 | ${tg_if1_mask}= | ${20}
68 | ${tg_if2_ip4}= | 12.0.0.2
69 | ${tg_if2_mask}= | ${20}
70 | ${dut1_if1_ip4}= | 10.0.0.1
71 | ${dut1_if1_mask}= | ${24}
72 | ${dut1_if2_ip4}= | 12.0.0.1
73 | ${dut1_if2_mask}= | ${24}
74 | ${dest_net}= | 20.0.0.0
75 | ${dest_mask}= | ${18}
76 # NAT settings
77 | ${nat_mode}= | endpoint-dependent
78 | ${in_net}= | 192.168.0.0
79 | ${in_mask}= | ${18}
80 | ${out_net}= | 68.142.68.0
81 | ${out_net_end}= | 68.142.68.15
82 | ${out_mask}= | ${28}
83 # Scale settings
84 | ${n_hosts}= | ${16384}
85 | ${n_ports}= | ${63}
86 | ${n_sessions}= | ${${n_hosts} * ${n_ports}}
87 | ${transaction_scale}= | ${n_sessions}
88 # Traffic profile
89 | ${traffic_profile}= | trex-astf-ethip4udp-${n_hosts}h
90 | ${transaction_type}= | udp_cps
91 | ${disable_latency}= | ${True}
92
93 *** Keywords ***
94 | Local Template
95 | |
96 | | [Documentation]
97 | | ... | [Cfg] DUT runs NAT44 ${nat_mode} configuration.
98 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
99 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
100 | |
101 | | ... | *Arguments:*
102 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
103 | | ... | Type: integer, string
104 | | ... | - phy_cores - Number of physical cores. Type: integer
105 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
106 | |
107 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
108 | |
109 | | Set Test Variable | \${frame_size}
110 | | ${pre_stats}= | Create List
111 | | ... | vpp-clear-stats | vpp-enable-packettrace | vpp-enable-elog
112 | | ... | vpp-clear-runtime
113 | | Set Test Variable | ${pre_stats}
114 | | ${post_stats}= | Create List
115 | | ... | vpp-show-stats | vpp-show-packettrace | vpp-show-elog
116 | | ... | vpp-show-runtime
117 | | Set Test Variable | ${post_stats}
118 | |
119 | | Given Set Max Rate And Jumbo
120 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
121 | | And Pre-initialize layer driver | ${nic_driver}
122 | | And Apply startup configuration on all VPP DUTs
123 | | When Initialize layer driver | ${nic_driver}
124 | | And Initialize layer interface
125 | | And Initialize IPv4 forwarding for NAT44 in circular topology
126 | | And Initialize NAT44 endpoint-dependent mode in circular topology
127 | | Then Find NDR and PDR intervals using optimized search
128
129 *** Test Cases ***
130 | 64B-1c-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr
131 | | [Tags] | 64B | 1C
132 | | frame_size=${64} | phy_cores=${1}
133
134 | 64B-2c-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr
135 | | [Tags] | 64B | 2C
136 | | frame_size=${64} | phy_cores=${2}
137
138 | 64B-4c-ethip4udp-nat44ed-h16384-p63-s1032192-cps-ndrpdr
139 | | [Tags] | 64B | 4C
140 | | frame_size=${64} | phy_cores=${4}