Add L2xc/L2bd/Ip4/Ip6 2-node tests for x710
[csit.git] / tests / vpp / perf / ip4 / 2n1l-25ge2p1xxv710-ethip4-ip4base-mrr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
18 | ... | NIC_Intel-XXV710 | ETH | IP4FWD | BASE | IP4BASE
19 | ...
20 | Suite Setup | Set up 2-node performance topology with DUT's NIC model
21 | ... | L3 | Intel-XXV710
22 | Suite Teardown | Tear down 2-node performance topology
23 | ...
24 | Test Setup | Set up performance test
25 | Test Teardown | Tear down performance mrr test
26 | ...
27 | Test Template | Local template
28 | ...
29 | Documentation | *Raw results IPv4 routing test cases*
30 | ...
31 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
32 | ... | with single links between nodes.
33 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
34 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
35 | ... | routing and two static IPv4 /24 route entries. DUT1 tested with
36 | ... | 2p25GE NIC X710 by Intel.
37 | ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
38 | ... | at line rate and reports total received/sent packets over trial period.
39 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
40 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
41 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
42 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
43 | ... | addresses of the TG node interfaces.
44 | ... | *[Ref] Applicable standard specifications:* RFC2544.
45
46 *** Variables ***
47 # XXV710-DA2 bandwidth limit ~50Gbps/2=25Gbps
48 | ${s_25G} | ${25000000000}
49 # XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
50 | ${s_18.75Mpps} | ${18750000}
51 # Traffic profile:
52 | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253
53
54 *** Keywords ***
55 | Local template
56 | | [Documentation]
57 | | ... | [Cfg] DUT runs IPv4 routing config.\
58 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
59 | | ... | [Ver] Measure MaxReceivedRate for ${framesize} frames using single\
60 | | ... | trial throughput test.
61 | | ...
62 | | ... | *Arguments:*
63 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
64 | | ... |   Type: integer, string
65 | | ... | - phy_cores - Number of physical cores. Type: integer
66 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
67 | | ...
68 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
69 | | ...
70 | | Set Test Variable | ${framesize}
71 | | ${get_framesize}= | Get Frame Size | ${framesize}
72 | | ${max_rate}= | Calculate pps | ${s_25G} | ${get_framesize}
73 | | ${max_rate}= | Set Variable If
74 | | ... | ${max_rate} > ${s_18.75Mpps} | ${s_18.75Mpps} | ${max_rate}
75 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
76 | | And Add PCI devices to all DUTs
77 | | And Run Keyword If | ${get_framesize} < ${1522}
78 | | ... | Add no multi seg to all DUTs
79 | | And Apply startup configuration on all VPP DUTs
80 | | When Initialize IPv4 forwarding in 2-node circular topology
81 | | Then Traffic should pass with maximum rate
82 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
83
84 *** Test Cases ***
85 | tc01-64B-1t1c-ethip4-ip4base-mrr
86 | | [Tags] | 64B | 1C
87 | | framesize=${64} | phy_cores=${1}
88
89 | tc02-1518B-1t1c-ethip4-ip4base-mrr
90 | | [Tags] | 1518B | 1C
91 | | framesize=${1518} | phy_cores=${1}
92
93 | tc03-9000B-1t1c-ethip4-ip4base-mrr
94 | | [Tags] | 9000B | 1C
95 | | framesize=${9000} | phy_cores=${1}
96
97 | tc04-IMIX-1t1c-ethip4-ip4base-mrr
98 | | [Tags] | IMIX | 1C
99 | | framesize=IMIX_v4_1 | phy_cores=${1}
100
101 | tc05-64B-2t2c-ethip4-ip4base-mrr
102 | | [Tags] | 64B | 2C
103 | | framesize=${64} | phy_cores=${2}
104
105 | tc06-1518B-2t2c-ethip4-ip4base-mrr
106 | | [Tags] | 1518B | 2C
107 | | framesize=${1518} | phy_cores=${2}
108
109 | tc07-9000B-2t2c-ethip4-ip4base-mrr
110 | | [Tags] | 9000B | 2C
111 | | framesize=${9000} | phy_cores=${2}
112
113 | tc08-IMIX-2t2c-ethip4-ip4base-mrr
114 | | [Tags] | IMIX | 2C
115 | | framesize=IMIX_v4_1 | phy_cores=${2}
116
117 | tc09-64B-4t4c-ethip4-ip4base-mrr
118 | | [Tags] | 64B | 4C
119 | | framesize=${64} | phy_cores=${4}
120
121 | tc10-1518B-4t4c-ethip4-ip4base-mrr
122 | | [Tags] | 1518B | 4C
123 | | framesize=${1518} | phy_cores=${4}
124
125 | tc11-9000B-4t4c-ethip4-ip4base-mrr
126 | | [Tags] | 9000B | 4C
127 | | framesize=${9000} | phy_cores=${4}
128
129 | tc12-IMIX-4t4c-ethip4-ip4base-mrr
130 | | [Tags] | IMIX | 4C
131 | | framesize=IMIX_v4_1 | phy_cores=${4}