fix(IPsec): fix policy tests
[csit.git] / tests / vpp / perf / ip4_tunnels / 10ge2p1x710-ethip4gtpusw-ip4base-ndrpdr.robot
1 # Copyright (c) 2021 Intel and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 | Resource | resources/libraries/robot/overlay/gtpu.robot
17
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
19 | ... | NIC_Intel-X710 | IP4FWD | IP4BASE | ENCAP | GTPU | DRV_VFIO_PCI
20 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
21 | ... | ethip4gtpusw-ip4base
22 |
23 | Suite Setup | Setup suite topology interfaces | performance
24 | Suite Teardown | Tear down suite | performance
25 | Test Setup | Setup test | performance
26 | Test Teardown | Tear down test | performance
27 |
28 | Test Template | Local Template
29 |
30 | Documentation | **RFC2544: Pkt throughput gtpu test cases**
31 | ... |
32 | ... | - **[Top] Network Topologies:** TG-DUT1-DUT2-TG 3-node circular \
33 | ... | topology with single links between nodes.
34 | ... |
35 | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4-GTPU on DUT1-DUT2, \
36 | ... | Eth-IPv4 on TG-DUTn for IPv4 routing over GTPU tunnel.
37 | ... |
38 | ... | - **[Cfg] DUT configuration:** DUT1 and DUT2 are configured with IPv4. \
39 | ... | routing and static routes. GTPU tunnel is configured between DUT1 \
40 | ... | and DUT2. DUT1 and DUT2 are tested with ${nic_name}.
41 | ... |
42 | ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
43 | ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
44 | ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
45 | ... | expressed in percentage of packets transmitted. NDR and PDR are \
46 | ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
47 | ... | library.
48 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile \
49 | ... | contains two L3 flow-groups with all packets containing Ethernet \
50 | ... | header, IPv4 header with IP protocol=61 and static payload. MAC \
51 | ... | addresses are matching MAC addresses of the TG node interfaces.
52 | ... |
53 | ... | - **[Ref] Applicable standard specifications:** RFC2544.
54
55 *** Variables ***
56 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | gtpu_plugin.so
57 | ${crypto_type}= | ${None}
58 | ${nic_name}= | Intel-X710
59 | ${nic_driver}= | vfio-pci
60 | ${nic_rxq_size}= | 0
61 | ${nic_txq_size}= | 0
62 | ${nic_pfs}= | 2
63 | ${nic_vfs}= | 0
64 | ${osi_layer}= | L3
65 | ${overhead}= | ${36}
66 # Traffic profile:
67 | ${traffic_profile}= | trex-stl-3n-ethip4-ip4src253
68
69 *** Keywords ***
70 | Local Template
71 | |
72 | | [Documentation]
73 | | ... | - **[Cfg]** DUT runs Gtpu hw offload routing config. \
74 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
75 | | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
76 | |
77 | | ... | *Arguments:*
78 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
79 | | ... | Type: integer, string
80 | | ... | - phy_cores - Number of physical cores. Type: integer
81 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
82 | |
83 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
84 | |
85 | | Set Test Variable | \${frame_size}
86 | |
87 | | Given Set Max Rate And Jumbo
88 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
89 | | And Pre-initialize layer driver | ${nic_driver}
90 | | And Apply startup configuration on all VPP DUTs
91 | | When Initialize layer driver | ${nic_driver}
92 | | And Initialize layer interface
93 | | And Initialize IP4 forwarding with GTPU tunnel in 3-node circular topology
94 | | Then Find NDR and PDR intervals using optimized search
95
96 *** Test Cases ***
97 | 64B-1c-ethip4gtpusw-ip4base-ndrpdr
98 | | [Tags] | 64B | 1C
99 | | frame_size=${64} | phy_cores=${1}
100
101 | 64B-2c-ethip4gtpusw-ip4base-ndrpdr
102 | | [Tags] | 64B | 2C
103 | | frame_size=${64} | phy_cores=${2}
104
105 | 64B-4c-ethip4gtpusw-ip4base-ndrpdr
106 | | [Tags] | 64B | 4C
107 | | frame_size=${64} | phy_cores=${4}
108
109 | 1518B-1c-ethip4gtpusw-ip4base-ndrpdr
110 | | [Tags] | 1518B | 1C
111 | | frame_size=${1518} | phy_cores=${1}
112
113 | 1518B-2c-ethip4gtpusw-ip4base-ndrpdr
114 | | [Tags] | 1518B | 2C
115 | | frame_size=${1518} | phy_cores=${2}
116
117 | 1518B-4c-ethip4gtpusw-ip4base-ndrpdr
118 | | [Tags] | 1518B | 4C
119 | | frame_size=${1518} | phy_cores=${4}
120
121 | 9000B-1c-ethip4gtpusw-ip4base-ndrpdr
122 | | [Tags] | 9000B | 1C
123 | | frame_size=${9000} | phy_cores=${1}
124
125 | 9000B-2c-ethip4gtpusw-ip4base-ndrpdr
126 | | [Tags] | 9000B | 2C
127 | | frame_size=${9000} | phy_cores=${2}
128
129 | 9000B-4c-ethip4gtpusw-ip4base-ndrpdr
130 | | [Tags] | 9000B | 4C
131 | | frame_size=${9000} | phy_cores=${4}
132
133 | IMIX-1c-ethip4gtpusw-ip4base-ndrpdr
134 | | [Tags] | IMIX | 1C
135 | | frame_size=IMIX_v4_1 | phy_cores=${1}
136
137 | IMIX-2c-ethip4gtpusw-ip4base-ndrpdr
138 | | [Tags] | IMIX | 2C
139 | | frame_size=IMIX_v4_1 | phy_cores=${2}
140
141 | IMIX-4c-ethip4gtpusw-ip4base-ndrpdr
142 | | [Tags] | IMIX | 4C
143 | | frame_size=IMIX_v4_1 | phy_cores=${4}