Add vpp-api-python for honeycomb tests
[csit.git] / tests / vpp / perf / ip4_tunnels / 10ge2p1x82599es-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr.robot
1 # Copyright (c) 2019 PANTHEON.tech and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-82599ES | L2BDMACLRN | SCALE | L2BD_1K | DOT1Q | VLAN_1K
19 | ... | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | VXLAN_1K
20 | ...
21 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
22 | ... | L2 | Intel-82599ES
23 | Suite Teardown | Tear down 3-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | ...
27 | Test Teardown | Tear down performance discovery test | ${min_rate}pps
28 | ... | ${framesize} | ${traffic_profile}
29 | ...
30 | Test Template | Local Template
31 | ...
32 | Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and VXLANoIPv4
33 | ... | test cases*
34 | ...
35 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
36 | ... | with single links between nodes.
37 | ... | *[Enc] Packet Encapsulations:* Eth-Dot1Q-IPv4 for L2 switching of IPv4\
38 | ... | on TG-DUTn. Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUTs.
39 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with 1k L2\
40 | ... | bridge domains. VXLAN tunnels are configured between L2BDs on DUT1 and\
41 | ... | DUT2. DUT1 and DUT2 tested with 2p10GE NIC 82599ES by Intel.
42 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
43 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
44 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
45 | ... | of packets transmitted. NDR and PDR are discovered for different\
46 | ... | Ethernet L2 frame sizes using MLRsearch library.\
47 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
48 | ... | contains two L3 flow-groups (flow-group per direction, up to 64,5k\
49 | ... | flows per flow-group) with all packets containing Ethernet header, IEEE\
50 | ... | 802.1Q header, IPv4 header with IP protocol=61 and static payload.\
51 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
52 | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348.
53
54 *** Variables ***
55 # 82599ES bandwidth limit
56 | ${s_limit}= | ${10000000000}
57 | ${overhead}= | ${50}
58 # Traffic profile:
59 | ${traffic_profile}= | trex-sl-3n-dot1qip4-vlan1kip4src254ip4dst254
60 # Number of VXLAN tunnels
61 | ${vxlan_count}= | ${1000}
62
63 *** Keywords ***
64 | Local Template
65 | | ...
66 | | [Documentation]
67 | | ... | [Cfg] Each DUT runs L2BD forwarding config with VLAN and VXLAN and\
68 | | ... | uses ${phy_cores} physical core(s) for worker threads.
69 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
70 | | ...
71 | | ... | *Arguments:*
72 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
73 | | ... | Type: integer, string
74 | | ... | - phy_cores - Number of physical cores. Type: integer
75 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
76 | | ...
77 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
78 | | ...
79 | | Set Test Variable | ${framesize}
80 | | Set Test Variable | ${min_rate} | ${10000}
81 | | ...
82 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
83 | | And Add PCI devices to all DUTs
84 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
85 | | ... | ${s_limit} | ${framesize} | overhead=${overhead}
86 | | And Apply startup configuration on all VPP DUTs
87 | | When Initialize L2 bridge domain with VLAN and VXLANoIPv4 in 3-node circular topology
88 | | ... | vxlan_count=${vxlan_count}
89 | | Then Find NDR and PDR intervals using optimized search
90 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
91
92 *** Test Cases ***
93 | tc01-64B-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
94 | | [Tags] | 64B | 1C
95 | | framesize=${64} | phy_cores=${1}
96
97 | tc02-64B-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
98 | | [Tags] | 64B | 2C
99 | | framesize=${64} | phy_cores=${2}
100
101 | tc03-64B-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
102 | | [Tags] | 64B | 4C
103 | | framesize=${64} | phy_cores=${4}
104
105 | tc04-1518B-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
106 | | [Tags] | 1518B | 1C
107 | | framesize=${1518} | phy_cores=${1}
108
109 | tc05-1518B-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
110 | | [Tags] | 1518B | 2C
111 | | framesize=${1518} | phy_cores=${2}
112
113 | tc06-1518B-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
114 | | [Tags] | 1518B | 4C
115 | | framesize=${1518} | phy_cores=${4}
116
117 | tc07-9000B-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
118 | | [Tags] | 9000B | 1C
119 | | framesize=${9000} | phy_cores=${1}
120
121 | tc08-9000B-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
122 | | [Tags] | 9000B | 2C
123 | | framesize=${9000} | phy_cores=${2}
124
125 | tc09-9000B-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
126 | | [Tags] | 9000B | 4C
127 | | framesize=${9000} | phy_cores=${4}
128
129 | tc10-IMIX-1c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
130 | | [Tags] | IMIX | 1C
131 | | framesize=IMIX_v4_1 | phy_cores=${1}
132
133 | tc11-IMIX-2c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
134 | | [Tags] | IMIX | 2C
135 | | framesize=IMIX_v4_1 | phy_cores=${2}
136
137 | tc12-IMIX-4c-dot1q--ethip4vxlan-l2bdscale1kl2bd1kvlan1kvxlan-ndrpdr
138 | | [Tags] | IMIX | 4C
139 | | framesize=IMIX_v4_1 | phy_cores=${4}