Refactor perf test cases
[csit.git] / tests / vpp / perf / ip6 / 10ge2p1x710-ethip6-ip6base-copwhtlistbase-mrr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Library | resources.libraries.python.Cop
17 | ...
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
19 | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | COPWHLIST
20 | ...
21 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
22 | ... | L3 | Intel-X710
23 | Suite Teardown | Tear down 3-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | ...
27 | Test Teardown | Tear down performance mrr test
28 | ...
29 | Test Template | Local template
30 | ...
31 | Documentation | *Raw results IPv6 whitelist test cases*
32 | ...
33 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
36 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
37 | ... | routing, two static IPv6 /64 routes and IPv6 COP security whitelist
38 | ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG.
39 | ... | DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
40 | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
41 | ... | at line rate and reports total received/sent packets over trial period.\
42 | ... | Test packets are generated by TG on
43 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
44 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
45 | ... | containing Ethernet header, IPv6 header and static
46 | ... | payload. MAC addresses are matching MAC addresses of the TG node
47 | ... | interfaces.
48 | ... | *[Ref] Applicable standard specifications:* RFC2544.
49
50 *** Variables ***
51 # X710-DA2 bandwidth limit
52 | ${s_limit}= | ${10000000000}
53 # Traffic profile:
54 | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
55
56 *** Keywords ***
57 | Local template
58 | | [Documentation]
59 | | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with
60 | | ... | ${phy_cores} phy core(s).
61 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
62 | | ... | trial throughput test.
63 | | ...
64 | | ... | *Arguments:*
65 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
66 | | ... | Type: integer, string
67 | | ... | - phy_cores - Number of physical cores. Type: integer
68 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
69 | | ...
70 | | [Arguments] | ${phy_cores} | ${framesize} | ${rxq}=${None}
71 | | ...
72 | | Set Test Variable | ${framesize}
73 | | ${get_framesize}= | Get Frame Size | ${framesize}
74 | | ${max_rate}= | Calculate pps | ${s_limit} | ${get_framesize}
75 | | ...
76 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
77 | | And Add PCI devices to all DUTs
78 | | And Run Keyword If | ${get_framesize} < ${1522}
79 | | ... | Add no multi seg to all DUTs
80 | | And Apply startup configuration on all VPP DUTs
81 | | When Initialize IPv6 forwarding in 3-node circular topology
82 | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE}
83 | | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE}
84 | | And Add Fib Table | ${dut2} | 1 | ipv6=${TRUE}
85 | | And Vpp Route Add | ${dut2} | 2001:2:: | 64 | vrf=1 | local=${TRUE}
86 | | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
87 | | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
88 | | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
89 | | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
90 | | Then Traffic should pass with maximum rate
91 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
92
93 *** Test Cases ***
94 | tc01-78B-1t1c-ethip6-ip6base-copwhtlistbase-mrr
95 | | [Tags] | 78B | 1C
96 | | phy_cores=${1} | framesize=${78}
97
98 | tc02-1518B-1t1c-ethip6-ip6base-copwhtlistbase-mrr
99 | | [Tags] | 1518B | 1C
100 | | phy_cores=${1} | framesize=${1518}
101
102 | tc03-9000B-1t1c-ethip6-ip6base-copwhtlistbase-mrr
103 | | [Tags] | 9000B | 1C
104 | | phy_cores=${1} | framesize=${9000}
105
106 | tc04-IMIX-1t1c-ethip6-ip6base-copwhtlistbase-mrr
107 | | [Tags] | IMIX | 1C
108 | | phy_cores=${1} | framesize=IMIX_v4_1
109
110 | tc05-78B-2t2c-ethip6-ip6base-copwhtlistbase-mrr
111 | | [Tags] | 78B | 2C
112 | | phy_cores=${2} | framesize=${78}
113
114 | tc06-1518B-2t2c-ethip6-ip6base-copwhtlistbase-mrr
115 | | [Tags] | 1518B | 2C
116 | | phy_cores=${2} | framesize=${1518}
117
118 | tc07-9000B-2t2c-ethip6-ip6base-copwhtlistbase-mrr
119 | | [Tags] | 9000B | 2C
120 | | phy_cores=${2} | framesize=${9000}
121
122 | tc08-IMIX-2t2c-ethip6-ip6base-copwhtlistbase-mrr
123 | | [Tags] | IMIX | 2C
124 | | phy_cores=${2} | framesize=IMIX_v4_1
125
126 | tc09-78B-4t4c-ethip6-ip6base-copwhtlistbase-mrr
127 | | [Tags] | 78B | 4C
128 | | phy_cores=${4} | framesize=${78}
129
130 | tc10-1518B-4t4c-ethip6-ip6base-copwhtlistbase-mrr
131 | | [Tags] | 1518B | 4C
132 | | phy_cores=${4} | framesize=${1518}
133
134 | tc11-9000B-4t4c-ethip6-ip6base-copwhtlistbase-mrr
135 | | [Tags] | 9000B | 4C
136 | | phy_cores=${4} | framesize=${9000}
137
138 | tc12-IMIX-4t4c-ethip6-ip6base-copwhtlistbase-mrr
139 | | [Tags] | IMIX | 4C
140 | | phy_cores=${4} | framesize=IMIX_v4_1