35008444b0c6a25e8e672f25fe97308558ce0a90
[csit.git] / tests / vpp / perf / ip6 / 2n1l-10ge2p1x710-ethip6-ip6base-adlalwlistbase-ndrpdr.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | ADLALWLIST | DRV_VFIO_PCI
19 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
20 | ... | ethip6-ip6base-adlalwlistbase
21 |
22 | Suite Setup | Setup suite topology interfaces | performance
23 | Suite Teardown | Tear down suite | performance
24 | Test Setup | Setup test | performance | performance
25 | Test Teardown | Tear down test | performance
26 |
27 | Test Template | Local Template
28 |
29 | Documentation | *RFC2544: Pkt throughput IPv6 allowlist test cases*
30 |
31 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
32 | ... | with single links between nodes.
33 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
34 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6
35 | ... | routing, two static IPv6 /64 routes and IPv6 ADL security allowlist
36 | ... | ingress /64 filter entries applied on links TG - DUT1.
37 | ... | DUT1 is tested with ${nic_name}.\
38 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
39 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
40 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
41 | ... | of packets transmitted. NDR and PDR are discovered for different\
42 | ... | Ethernet L2 frame sizes using MLRsearch library.\
43 | ... | Test packets are generated by TG on
44 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
45 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
46 | ... | containing Ethernet header, IPv6 header and static
47 | ... | payload. MAC addresses are matching MAC addresses of the TG node
48 | ... | interfaces.
49 | ... | *[Ref] Applicable standard specifications:* RFC2544.
50
51 *** Variables ***
52 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | adl_plugin.so
53 | ${crypto_type}= | ${None}
54 | ${nic_name}= | Intel-X710
55 | ${nic_driver}= | vfio-pci
56 | ${nic_rxq_size}= | 0
57 | ${nic_txq_size}= | 0
58 | ${nic_pfs}= | 2
59 | ${nic_vfs}= | 0
60 | ${osi_layer}= | L3
61 | ${overhead}= | ${0}
62 # Traffic profile:
63 | ${traffic_profile}= | trex-stl-2n-ethip6-ip6src253
64
65 *** Keywords ***
66 | Local Template
67 | | [Documentation]
68 | | ... | [Cfg] DUT runs IPv6 routing and allowlist filters config with
69 | | ... | ${phy_cores} phy core(s).
70 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
71 | |
72 | | ... | *Arguments:*
73 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
74 | | ... | Type: integer, string
75 | | ... | - phy_cores - Number of physical cores. Type: integer
76 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
77 | |
78 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
79 | |
80 | | Set Test Variable | \${frame_size}
81 | |
82 | | Given Set Max Rate And Jumbo
83 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
84 | | And Pre-initialize layer driver | ${nic_driver}
85 | | And Apply startup configuration on all VPP DUTs
86 | | When Initialize layer driver | ${nic_driver}
87 | | And Initialize layer interface
88 | | And Initialize IPv6 forwarding in circular topology
89 | | And Add Fib Table | ${dut1} | 1 | ipv6=${TRUE}
90 | | And Vpp Route Add | ${dut1} | 2001:1:: | 64 | vrf=1 | local=${TRUE}
91 | | And ADL Add allowlist Entry | ${dut1} | ${DUT1_${int}1}[0] | ip6 | 1
92 | | And ADL interface enable or disable | ${dut1} | ${DUT1_${int}1}[0] | enable
93 | | Then Find NDR and PDR intervals using optimized search
94
95 *** Test Cases ***
96 | 78B-1c-ethip6-ip6base-adlalwlistbase-ndrpdr
97 | | [Tags] | 78B | 1C
98 | | frame_size=${78} | phy_cores=${1}
99
100 | 78B-2c-ethip6-ip6base-adlalwlistbase-ndrpdr
101 | | [Tags] | 78B | 2C
102 | | frame_size=${78} | phy_cores=${2}
103
104 | 78B-4c-ethip6-ip6base-adlalwlistbase-ndrpdr
105 | | [Tags] | 78B | 4C
106 | | frame_size=${78} | phy_cores=${4}
107
108 | 1518B-1c-ethip6-ip6base-adlalwlistbase-ndrpdr
109 | | [Tags] | 1518B | 1C
110 | | frame_size=${1518} | phy_cores=${1}
111
112 | 1518B-2c-ethip6-ip6base-adlalwlistbase-ndrpdr
113 | | [Tags] | 1518B | 2C
114 | | frame_size=${1518} | phy_cores=${2}
115
116 | 1518B-4c-ethip6-ip6base-adlalwlistbase-ndrpdr
117 | | [Tags] | 1518B | 4C
118 | | frame_size=${1518} | phy_cores=${4}
119
120 | 9000B-1c-ethip6-ip6base-adlalwlistbase-ndrpdr
121 | | [Tags] | 9000B | 1C
122 | | frame_size=${9000} | phy_cores=${1}
123
124 | 9000B-2c-ethip6-ip6base-adlalwlistbase-ndrpdr
125 | | [Tags] | 9000B | 2C
126 | | frame_size=${9000} | phy_cores=${2}
127
128 | 9000B-4c-ethip6-ip6base-adlalwlistbase-ndrpdr
129 | | [Tags] | 9000B | 4C
130 | | frame_size=${9000} | phy_cores=${4}
131
132 | IMIX-1c-ethip6-ip6base-adlalwlistbase-ndrpdr
133 | | [Tags] | IMIX | 1C
134 | | frame_size=IMIX_v4_1 | phy_cores=${1}
135
136 | IMIX-2c-ethip6-ip6base-adlalwlistbase-ndrpdr
137 | | [Tags] | IMIX | 2C
138 | | frame_size=IMIX_v4_1 | phy_cores=${2}
139
140 | IMIX-4c-ethip6-ip6base-adlalwlistbase-ndrpdr
141 | | [Tags] | IMIX | 4C
142 | | frame_size=IMIX_v4_1 | phy_cores=${4}