Python3: resources and libraries
[csit.git] / tests / vpp / perf / ip6 / 2n1l-10ge2p1x710-ethip6-ip6base-iacldstbase-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | IACLDST | DRV_VFIO_PCI
19 |
20 | Suite Setup | Setup suite single link | performance
21 | Suite Teardown | Tear down suite | performance
22 | Test Setup | Setup test
23 | Test Teardown | Tear down test | performance | classify
24 |
25 | Test Template | Local Template
26 |
27 | Documentation | *RFC2544: Pkt throughput IPv6 iAcl whitelist test cases*
28 |
29 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
30 | ... | with single links between nodes.
31 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
32 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6
33 | ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist
34 | ... | ingress /64 filter entries applied on links TG - DUT1.
35 | ... | DUT1 is tested with ${nic_name}.\
36 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
37 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
38 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
39 | ... | of packets transmitted. NDR and PDR are discovered for different\
40 | ... | Ethernet L2 frame sizes using MLRsearch library.\
41 | ... | Test packets are generated by TG on
42 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
43 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
44 | ... | containing Ethernet header, IPv6 header and generated payload. MAC
45 | ... | addresses are matching MAC addresses of the TG node interfaces.
46 | ... | *[Ref] Applicable standard specifications:* RFC2544.
47
48 *** Variables ***
49 | @{plugins_to_enable}= | dpdk_plugin.so
50 | ${crypto_type}= | ${None}
51 | ${nic_name}= | Intel-X710
52 | ${nic_driver}= | vfio-pci
53 | ${osi_layer}= | L3
54 | ${overhead}= | ${0}
55 # Traffic profile:
56 | ${traffic_profile}= | trex-sl-2n-ethip6-ip6src253
57
58 *** Keywords ***
59 | Local Template
60 | | [Documentation]
61 | | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with
62 | | ... | ${phy_cores} phy core(s).
63 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
64 | |
65 | | ... | *Arguments:*
66 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
67 | | ... | Type: integer, string
68 | | ... | - phy_cores - Number of physical cores. Type: integer
69 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
70 | |
71 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
72 | |
73 | | Set Test Variable | \${frame_size}
74 | |
75 | | Given Set Max Rate And Jumbo
76 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
77 | | And Pre-initialize layer driver | ${nic_driver}
78 | | And Apply startup configuration on all VPP DUTs
79 | | When Initialize layer driver | ${nic_driver}
80 | | And Initialize layer interface
81 | | And Initialize IPv6 forwarding in circular topology
82 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
83 | | ... | ${dut1} | ip6 | dst | ffff:ffff:ffff:ffff:ffff:ffff:ffff:0
84 | | And Vpp Configures Classify Session L3
85 | | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} | ip6 | dst
86 | | ... | 2001:2::0
87 | | And Vpp Enable Input Acl Interface
88 | | ... | ${dut1} | ${dut1_if1} | ip6 | ${table_idx}
89 | | And Vpp Configures Classify Session L3
90 | | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} | ip6 | dst
91 | | ... | 2001:1::0
92 | | And Vpp Enable Input Acl Interface
93 | | ... | ${dut1} | ${dut1_if2} | ip6 | ${table_idx}
94 | | Then Find NDR and PDR intervals using optimized search
95
96 *** Test Cases ***
97 | tc01-78B-1c-ethip6-ip6base-iacldstbase-ndrpdr
98 | | [Tags] | 78B | 1C
99 | | frame_size=${78} | phy_cores=${1}
100
101 | tc02-78B-2c-ethip6-ip6base-iacldstbase-ndrpdr
102 | | [Tags] | 78B | 2C
103 | | frame_size=${78} | phy_cores=${2}
104
105 | tc03-78B-4c-ethip6-ip6base-iacldstbase-ndrpdr
106 | | [Tags] | 78B | 4C
107 | | frame_size=${78} | phy_cores=${4}
108
109 | tc04-1518B-1c-ethip6-ip6base-iacldstbase-ndrpdr
110 | | [Tags] | 1518B | 1C
111 | | frame_size=${1518} | phy_cores=${1}
112
113 | tc05-1518B-2c-ethip6-ip6base-iacldstbase-ndrpdr
114 | | [Tags] | 1518B | 2C
115 | | frame_size=${1518} | phy_cores=${2}
116
117 | tc06-1518B-4c-ethip6-ip6base-iacldstbase-ndrpdr
118 | | [Tags] | 1518B | 4C
119 | | frame_size=${1518} | phy_cores=${4}
120
121 | tc07-9000B-1c-ethip6-ip6base-iacldstbase-ndrpdr
122 | | [Tags] | 9000B | 1C
123 | | frame_size=${9000} | phy_cores=${1}
124
125 | tc08-9000B-2c-ethip6-ip6base-iacldstbase-ndrpdr
126 | | [Tags] | 9000B | 2C
127 | | frame_size=${9000} | phy_cores=${2}
128
129 | tc09-9000B-4c-ethip6-ip6base-iacldstbase-ndrpdr
130 | | [Tags] | 9000B | 4C
131 | | frame_size=${9000} | phy_cores=${4}
132
133 | tc10-IMIX-1c-ethip6-ip6base-iacldstbase-ndrpdr
134 | | [Tags] | IMIX | 1C
135 | | frame_size=IMIX_v4_1 | phy_cores=${1}
136
137 | tc11-IMIX-2c-ethip6-ip6base-iacldstbase-ndrpdr
138 | | [Tags] | IMIX | 2C
139 | | frame_size=IMIX_v4_1 | phy_cores=${2}
140
141 | tc12-IMIX-4c-ethip6-ip6base-iacldstbase-ndrpdr
142 | | [Tags] | IMIX | 4C
143 | | frame_size=IMIX_v4_1 | phy_cores=${4}