tests/vpp/perf/l2/10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr.robot

   1 # Copyright (c) 2018 Cisco and/or its affiliates.
   2 # Licensed under the Apache License, Version 2.0 (the "License");
   3 # you may not use this file except in compliance with the License.
   4 # You may obtain a copy of the License at:
   5 #
   6 #     http://www.apache.org/licenses/LICENSE-2.0
   7 #
   8 # Unless required by applicable law or agreed to in writing, software
   9 # distributed under the License is distributed on an "AS IS" BASIS,
  10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  11 # See the License for the specific language governing permissions and
  12 # limitations under the License.
  13
  14 *** Settings ***
  15 | Resource | resources/libraries/robot/performance/performance_setup.robot
  16 | ...
  17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
  18 | ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
  19 | ... | IACL | ACL50 | 10k_FLOWS
  20 | ...
  21 | Suite Setup | Run Keywords
  22 | ... | Set up 3-node performance topology with DUT's NIC model | L2
  23 | ... | Intel-X520-DA2
  24 | ... | AND | Set up performance test suite with ACL
  25 | ...
  26 | Suite Teardown | Tear down 3-node performance topology
  27 | ...
  28 | Test Setup | Set up performance test
  29 | ...
  30 | Test Teardown | Tear down performance mrr test
  31 | ...
  32 | Test Template | Local Template
  33 | ...
  34 | Documentation | *Raw results L2BD test cases with ACL*
  35 | ...
  36 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
  37 | ... | with single links between nodes.
  38 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
  39 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
  40 | ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
  41 | ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
  42 | ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.\
  43 | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
  44 | ... | at line rate and reports total received/sent packets over trial period.\
  45 | ... | Test packets are generated by TG on\
  46 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
  47 | ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
  48 | ... | all packets containing Ethernet header, IPv4 header with UDP header and\
  49 | ... | static payload. MAC addresses are matching MAC addresses of the TG node\
  50 | ... | interfaces.
  51 | ... | *[Ref] Applicable standard specifications:* RFC2544.
  52
  53 *** Variables ***
  54 # X520-DA2 bandwidth limit
  55 | ${s_limit}= | ${10000000000}
  56
  57 # ACL test setup
  58 | ${acl_action}= | permit
  59 | ${acl_apply_type}= | input
  60 | ${no_hit_aces_number}= | 50
  61 | ${flows_per_dir}= | 10k
  62
  63 # starting points for non-hitting ACLs
  64 | ${src_ip_start}= | 30.30.30.1
  65 | ${dst_ip_start}= | 40.40.40.1
  66 | ${ip_step}= | ${1}
  67 | ${sport_start}= | ${1000}
  68 | ${dport_start}= | ${1000}
  69 | ${port_step}= | ${1}
  70 | ${trex_stream1_subnet}= | 10.10.10.0/24
  71 | ${trex_stream2_subnet}= | 20.20.20.0/24
  72
  73 # Traffic profile:
  74 | ${traffic_profile} | trex-sl-3n-ethip4udp-10u1000p-conc
  75
  76 *** Keywords ***
  77 | Local Template
  78 | | [Documentation]
  79 | | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
  80 | | ... | core(s).
  81 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
  82 | | ... | trial throughput test.
  83 | | ...
  84 | | ... | *Arguments:*
  85 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
  86 | | ... | Type: integer, string
  87 | | ... | - phy_cores - Number of physical cores. Type: integer
  88 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
  89 | | ...
  90 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
  91 | | ...
  92 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
  93 | | And Add PCI devices to all DUTs
  94 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
  95 | | ... | ${s_limit} | ${framesize}
  96 | | And Apply startup configuration on all VPP DUTs
  97 | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
  98 | | Then Traffic should pass with maximum rate
  99 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
 100
 101 *** Test Cases ***
 102 | tc01-64B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 103 | | [Tags] | 64B | 1C
 104 | | framesize=${64} | phy_cores=${1}
 105
 106 | tc02-64B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 107 | | [Tags] | 64B | 2C
 108 | | framesize=${64} | phy_cores=${2}
 109
 110 | tc03-64B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 111 | | [Tags] | 64B | 4C
 112 | | framesize=${64} | phy_cores=${4}
 113
 114 | tc04-1518B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 115 | | [Tags] | 1518B | 1C
 116 | | framesize=${1518} | phy_cores=${1}
 117
 118 | tc05-1518B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 119 | | [Tags] | 1518B | 2C
 120 | | framesize=${1518} | phy_cores=${2}
 121
 122 | tc06-1518B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 123 | | [Tags] | 1518B | 4C
 124 | | framesize=${1518} | phy_cores=${4}
 125
 126 | tc07-9000B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 127 | | [Tags] | 9000B | 1C
 128 | | framesize=${9000} | phy_cores=${1}
 129
 130 | tc08-9000B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 131 | | [Tags] | 9000B | 2C
 132 | | framesize=${9000} | phy_cores=${2}
 133
 134 | tc09-9000B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 135 | | [Tags] | 9000B | 4C
 136 | | framesize=${9000} | phy_cores=${4}
 137
 138 | tc10-IMIX-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 139 | | [Tags] | IMIX | 1C
 140 | | framesize=IMIX_v4_1 | phy_cores=${1}
 141
 142 | tc11-IMIX-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 143 | | [Tags] | IMIX | 2C
 144 | | framesize=IMIX_v4_1 | phy_cores=${2}
 145
 146 | tc12-IMIX-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-mrr
 147 | | [Tags] | IMIX | 4C
 148 | | framesize=IMIX_v4_1 | phy_cores=${4}