CSIT-1202: Unify min_rate
[csit.git] / tests / vpp / perf / l2 / 10ge2p1x520-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATELESS
19 | ... | IACL | ACL50 | 10k_FLOWS
20 | ...
21 | Suite Setup | Run Keywords
22 | ... | Set up 3-node performance topology with DUT's NIC model | L2
23 | ... | Intel-X520-DA2
24 | ... | AND | Set up performance test suite with ACL
25 | ...
26 | Suite Teardown | Tear down 3-node performance topology
27 | ...
28 | Test Setup | Set up performance test
29 | ...
30 | Test Teardown | Tear down performance discovery test | ${min_rate}pps
31 | ... | ${framesize} | ${traffic_profile}
32 | ...
33 | Test Template | Local Template
34 | ...
35 | Documentation | *RFC2544: Pkt throughput L2BD test cases with ACL*
36 | ...
37 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
38 | ... | with single links between nodes.
39 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
40 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
41 | ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
42 | ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
43 | ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.\
44 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
45 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
46 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
47 | ... | of packets transmitted. NDR and PDR are discovered for different
48 | ... | Ethernet L2 frame sizes using MLRsearch library.
49 | ... | Test packets are generated by TG on\
50 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
51 | ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
52 | ... | all packets containing Ethernet header, IPv4 header with UDP header and\
53 | ... | static payload. MAC addresses are matching MAC addresses of the TG node\
54 | ... | interfaces.
55 | ... | *[Ref] Applicable standard specifications:* RFC2544.
56
57 *** Variables ***
58 # X520-DA2 bandwidth limit
59 | ${s_limit}= | ${10000000000}
60
61 # ACL test setup
62 | ${acl_action}= | permit
63 | ${acl_apply_type}= | input
64 | ${no_hit_aces_number}= | 50
65 | ${flows_per_dir}= | 10k
66
67 # starting points for non-hitting ACLs
68 | ${src_ip_start}= | 30.30.30.1
69 | ${dst_ip_start}= | 40.40.40.1
70 | ${ip_step}= | ${1}
71 | ${sport_start}= | ${1000}
72 | ${dport_start}= | ${1000}
73 | ${port_step}= | ${1}
74 | ${trex_stream1_subnet}= | 10.10.10.0/24
75 | ${trex_stream2_subnet}= | 20.20.20.0/24
76
77 # Traffic profile:
78 | ${traffic_profile} | trex-sl-3n-ethip4udp-10u1000p-conc
79
80 *** Keywords ***
81 | Local Template
82 | | [Documentation]
83 | | ... | [Cfg] DUT runs L2BD config with ACLs with ${phy_cores} phy
84 | | ... | core(s).
85 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
86 | | ...
87 | | ... | *Arguments:*
88 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
89 | | ... | Type: integer, string
90 | | ... | - phy_cores - Number of physical cores. Type: integer
91 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
92 | | ...
93 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
94 | | ...
95 | | Set Test Variable | ${framesize}
96 | | Set Test Variable | ${min_rate} | ${10000}
97 | | ...
98 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
99 | | And Add PCI devices to all DUTs
100 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
101 | | ... | ${s_limit} | ${framesize}
102 | | And Apply startup configuration on all VPP DUTs
103 | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
104 | | Then Find NDR and PDR intervals using optimized search
105 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
106
107 *** Test Cases ***
108 | tc01-64B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
109 | | [Tags] | 64B | 1C
110 | | framesize=${64} | phy_cores=${1}
111
112 | tc02-64B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
113 | | [Tags] | 64B | 2C
114 | | framesize=${64} | phy_cores=${2}
115
116 | tc03-64B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
117 | | [Tags] | 64B | 4C
118 | | framesize=${64} | phy_cores=${4}
119
120 | tc04-1518B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
121 | | [Tags] | 1518B | 1C
122 | | framesize=${1518} | phy_cores=${1}
123
124 | tc05-1518B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
125 | | [Tags] | 1518B | 2C
126 | | framesize=${1518} | phy_cores=${2}
127
128 | tc06-1518B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
129 | | [Tags] | 1518B | 4C
130 | | framesize=${1518} | phy_cores=${4}
131
132 | tc07-9000B-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
133 | | [Tags] | 9000B | 1C
134 | | framesize=${9000} | phy_cores=${1}
135
136 | tc08-9000B-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
137 | | [Tags] | 9000B | 2C
138 | | framesize=${9000} | phy_cores=${2}
139
140 | tc09-9000B-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
141 | | [Tags] | 9000B | 4C
142 | | framesize=${9000} | phy_cores=${4}
143
144 | tc10-IMIX-1c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
145 | | [Tags] | IMIX | 1C
146 | | framesize=IMIX_v4_1 | phy_cores=${1}
147
148 | tc11-IMIX-2c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
149 | | [Tags] | IMIX | 2C
150 | | framesize=IMIX_v4_1 | phy_cores=${2}
151
152 | tc12-IMIX-4c-eth-l2bdbasemaclrn-iacl50sl-10kflows-ndrpdr
153 | | [Tags] | IMIX | 4C
154 | | framesize=IMIX_v4_1 | phy_cores=${4}