Upgrade autogen to NICs and search types
[csit.git] / tests / vpp / perf / l2 / 10ge2p1x710-dot1ad-l2xcbase-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Resource | resources/libraries/robot/l2/tagging.robot
17 | ...
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
19 | ... | NIC_Intel-X710 | L2XCFWD | BASE | DOT1AD
20 | ...
21 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
22 | ... | L2 | ${nic_name}
23 | Suite Teardown | Tear down 3-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | Test Teardown | Tear down performance test
27 | ...
28 | Test Template | Local Template
29 | ...
30 | Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases*
31 | ...
32 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
33 | ... | with single links between nodes.
34 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 xconnect.
35 | ... | 802.1ad tagging is applied on link between DUT1 and DUT2 with inner 4B
36 | ... | vlan tag (id=100) and outer 4B vlan tag (id=200).
37 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
38 | ... | connect. DUT1 and DUT2 tested with ${nic_name}.\
39 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
40 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
41 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
42 | ... | of packets transmitted. NDR and PDR are discovered for different\
43 | ... | Ethernet L2 frame sizes using MLRsearch library.\
44 | ... | Test packets are generated by TG on
45 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
46 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
47 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and
48 | ... | static payload. MAC addresses are matching MAC addresses of the TG
49 | ... | node interfaces.
50 | ... | *[Ref] Applicable standard specifications:* RFC2544.
51
52 *** Variables ***
53 | ${nic_name}= | Intel-X710
54 | ${overhead}= | ${8}
55 | ${subid}= | 10
56 | ${outer_vlan_id}= | 100
57 | ${inner_vlan_id}= | 200
58 | ${type_subif}= | two_tags
59 | ${tag_rewrite}= | pop-2
60 # Traffic profile:
61 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
62
63 *** Keywords ***
64 | Local Template
65 | | [Documentation]
66 | | ... | [Cfg] DUT runs L2XC forwarding config.
67 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
68 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
69 | | ...
70 | | ... | *Arguments:*
71 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
72 | | ... | Type: integer, string
73 | | ... | - phy_cores - Number of physical cores. Type: integer
74 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
75 | | ...
76 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
77 | | ...
78 | | Set Test Variable | \${frame_size}
79 | | ...
80 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
81 | | And Add PCI devices to all DUTs
82 | | Set Max Rate And Jumbo And Handle Multi Seg
83 | | And Apply startup configuration on all VPP DUTs
84 | | And Set interfaces in path up
85 | | When Initialize VLAN sub-interfaces in 3-node circular topology
86 | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid}
87 | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif}
88 | | And Configure L2 tag rewrite method on interfaces
89 | | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2}
90 | | ... | ${tag_rewrite}
91 | | And Connect interfaces and VLAN sub-interfaces using L2XC
92 | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1}
93 | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2}
94 | | Then Find NDR and PDR intervals using optimized search
95
96 *** Test Cases ***
97 | tc01-64B-1c-dot1ad-l2xcbase-ndrpdr
98 | | [Tags] | 64B | 1C
99 | | frame_size=${64} | phy_cores=${1}
100
101 | tc02-64B-2c-dot1ad-l2xcbase-ndrpdr
102 | | [Tags] | 64B | 2C
103 | | frame_size=${64} | phy_cores=${2}
104
105 | tc03-64B-4c-dot1ad-l2xcbase-ndrpdr
106 | | [Tags] | 64B | 4C
107 | | frame_size=${64} | phy_cores=${4}
108
109 | tc04-1518B-1c-dot1ad-l2xcbase-ndrpdr
110 | | [Tags] | 1518B | 1C
111 | | frame_size=${1518} | phy_cores=${1}
112
113 | tc05-1518B-2c-dot1ad-l2xcbase-ndrpdr
114 | | [Tags] | 1518B | 2C
115 | | frame_size=${1518} | phy_cores=${2}
116
117 | tc06-1518B-4c-dot1ad-l2xcbase-ndrpdr
118 | | [Tags] | 1518B | 4C
119 | | frame_size=${1518} | phy_cores=${4}
120
121 | tc07-9000B-1c-dot1ad-l2xcbase-ndrpdr
122 | | [Tags] | 9000B | 1C
123 | | frame_size=${9000} | phy_cores=${1}
124
125 | tc08-9000B-2c-dot1ad-l2xcbase-ndrpdr
126 | | [Tags] | 9000B | 2C
127 | | frame_size=${9000} | phy_cores=${2}
128
129 | tc09-9000B-4c-dot1ad-l2xcbase-ndrpdr
130 | | [Tags] | 9000B | 4C
131 | | frame_size=${9000} | phy_cores=${4}
132
133 | tc10-IMIX-1c-dot1ad-l2xcbase-ndrpdr
134 | | [Tags] | IMIX | 1C
135 | | frame_size=IMIX_v4_1 | phy_cores=${1}
136
137 | tc11-IMIX-2c-dot1ad-l2xcbase-ndrpdr
138 | | [Tags] | IMIX | 2C
139 | | frame_size=IMIX_v4_1 | phy_cores=${2}
140
141 | tc12-IMIX-4c-dot1ad-l2xcbase-ndrpdr
142 | | [Tags] | IMIX | 4C
143 | | frame_size=IMIX_v4_1 | phy_cores=${4}