Align suite/test teardown/setup
[csit.git] / tests / vpp / perf / l2 / 10ge2p1x710-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | FEATURE | ACL | ACL_STATEFUL
19 | ... | OACL | ACL50 | 100_FLOWS
20 | ...
21 | Suite Setup | Run Keywords
22 | ... | Set up 3-node performance topology with DUT's NIC model | L2
23 | ... | ${nic_name}
24 | ... | AND | Set up performance test suite with ACL
25 | Suite Teardown | Tear down suite | performance
26 | ...
27 | Test Setup | Set up performance test
28 | Test Teardown | Tear down test | performance | acl
29 | ...
30 | Test Template | Local Template
31 | ...
32 | Documentation | *RFC2544: Packet throughput L2BD test cases with ACL*
33 | ...
34 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
35 | ... | with single links between nodes.
36 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
37 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
38 | ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
39 | ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
40 | ... | DUT1 and DUT2 are tested with ${nic_name}.\
41 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
42 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
43 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
44 | ... | of packets transmitted. NDR and PDR are discovered for different\
45 | ... | Ethernet L2 frame sizes using MLRsearch library.\
46 | ... | Test packets are generated by TG on\
47 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
48 | ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
49 | ... | all packets containing Ethernet header, IPv4 header with UDP header and\
50 | ... | static payload. MAC addresses are matching MAC addresses of the TG node\
51 | ... | interfaces.
52 | ... | *[Ref] Applicable standard specifications:* RFC2544.
53
54 *** Variables ***
55 | ${nic_name}= | Intel-X710
56 | ${overhead}= | ${0}
57 # ACL test setup
58 | ${acl_action}= | permit+reflect
59 | ${acl_apply_type}= | output
60 | ${no_hit_aces_number}= | 50
61 | ${flows_per_dir}= | 100
62 # starting points for non-hitting ACLs
63 | ${src_ip_start}= | 30.30.30.1
64 | ${dst_ip_start}= | 40.40.40.1
65 | ${ip_step}= | ${1}
66 | ${sport_start}= | ${1000}
67 | ${dport_start}= | ${1000}
68 | ${port_step}= | ${1}
69 | ${trex_stream1_subnet}= | 10.10.10.0/24
70 | ${trex_stream2_subnet}= | 20.20.20.0/24
71 | ${traffic_profile}= | trex-sl-3n-ethip4udp-10u10p-conc
72
73 *** Keywords ***
74 | Local Template
75 | | [Documentation] | FIXME.
76 | | ... | [Cfg] DUT runs IPv4 routing config.
77 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
78 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
79 | | ...
80 | | ... | *Arguments:*
81 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
82 | | ... | Type: integer, string
83 | | ... | - phy_cores - Number of physical cores. Type: integer
84 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
85 | | ...
86 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
87 | | ...
88 | | Set Test Variable | \${frame_size}
89 | | ...
90 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
91 | | And Add PCI devices to all DUTs
92 | | Set Max Rate And Jumbo And Handle Multi Seg
93 | | And Apply startup configuration on all VPP DUTs
94 | | When Initialize L2 bridge domain with IPv4 ACLs on DUT1 in 3-node circular topology
95 | | Then Find NDR and PDR intervals using optimized search
96
97 *** Test Cases ***
98 | tc01-64B-1c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
99 | | [Tags] | 64B | 1C
100 | | frame_size=${64} | phy_cores=${1}
101
102 | tc02-64B-2c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
103 | | [Tags] | 64B | 2C
104 | | frame_size=${64} | phy_cores=${2}
105
106 | tc03-64B-4c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
107 | | [Tags] | 64B | 4C
108 | | frame_size=${64} | phy_cores=${4}
109
110 | tc04-1518B-1c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
111 | | [Tags] | 1518B | 1C
112 | | frame_size=${1518} | phy_cores=${1}
113
114 | tc05-1518B-2c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
115 | | [Tags] | 1518B | 2C
116 | | frame_size=${1518} | phy_cores=${2}
117
118 | tc06-1518B-4c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
119 | | [Tags] | 1518B | 4C
120 | | frame_size=${1518} | phy_cores=${4}
121
122 | tc07-9000B-1c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
123 | | [Tags] | 9000B | 1C
124 | | frame_size=${9000} | phy_cores=${1}
125
126 | tc08-9000B-2c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
127 | | [Tags] | 9000B | 2C
128 | | frame_size=${9000} | phy_cores=${2}
129
130 | tc09-9000B-4c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
131 | | [Tags] | 9000B | 4C
132 | | frame_size=${9000} | phy_cores=${4}
133
134 | tc10-IMIX-1c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
135 | | [Tags] | IMIX | 1C
136 | | frame_size=IMIX_v4_1 | phy_cores=${1}
137
138 | tc11-IMIX-2c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
139 | | [Tags] | IMIX | 2C
140 | | frame_size=IMIX_v4_1 | phy_cores=${2}
141
142 | tc12-IMIX-4c-eth-l2bdbasemaclrn-oacl50sf-100flows-ndrpdr
143 | | [Tags] | IMIX | 4C
144 | | frame_size=IMIX_v4_1 | phy_cores=${4}