CSIT-1201 Create L2patch perf tests
[csit.git] / tests / vpp / perf / l2 / 10ge2p1x710-eth-l2patch-ndrpdr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | L2PATCH | BASE
19 | ...
20 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
21 | ... | L2 | Intel-X710
22 | Suite Teardown | Tear down 3-node performance topology
23 | ...
24 | Test Setup | Set up performance test
25 | ...
26 | Test Teardown | Tear down performance discovery test | ${min_rate}pps
27 | ... | ${framesize} | ${traffic_profile}
28 | ...
29 | Test Template | Local template
30 | ...
31 | Documentation | *Raw results L2patch test cases*
32 | ...
33 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 patch.
36 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 patch\
37 | ... | DUT1 and DUT2 tested with 2p10GE NIC X710 by Intel.
38 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
39 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
40 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
41 | ... | of packets transmitted. NDR and PDR are discovered for different\
42 | ... | Ethernet L2 frame sizes using MLRsearch library\
43 | ... | Test packets are generated by TG on\
44 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
45 | ... | (flow-group per direction, 254 flows per flow-group) with\
46 | ... | all packets containing Ethernet header,IPv4 header with static payload.\
47 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
48 | ... | *[Ref] Applicable standard specifications:* RFC2544.
49
50 *** Variables ***
51 # X710-DA2 bandwidth limit
52 | ${s_limit}= | ${10000000000}
53 # Traffic profile:
54 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
55
56 *** Keywords ***
57 | Local template
58 | | [Documentation]
59 | | ... | [Cfg] DUT runs L2 patch config with ${phy_cores} phy
60 | | ... | core(s).
61 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
62 | | ...
63 | | ... | *Arguments:*
64 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
65 | | ... | Type: integer, string
66 | | ... | - phy_cores - Number of physical cores. Type: integer
67 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
68 | | ...
69 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
70 | | ...
71 | | Set Test Variable | ${framesize}
72 | | Set Test Variable | ${min_rate} | ${20000}
73 | | ...
74 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
75 | | And Add PCI devices to all DUTs
76 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
77 | | ... | ${s_limit} | ${framesize}
78 | | And Add DPDK dev default RXD to all DUTs | 2048
79 | | And Add DPDK dev default TXD to all DUTs | 2048
80 | | And Apply startup configuration on all VPP DUTs
81 | | When Initialize L2 patch
82 | | Then Find NDR and PDR intervals using optimized search
83 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
84
85 *** Test Cases ***
86 | tc01-64B-1c-eth-l2patch-mrr
87 | | [Tags] | 64B | 1C
88 | | framesize=${64} | phy_cores=${1}
89
90 | tc02-1518B-1c-eth-l2patch-mrr
91 | | [Tags] | 1518B | 1C
92 | | framesize=${1518} | phy_cores=${1}
93
94 | tc03-9000B-1c-eth-l2patch-mrr
95 | | [Tags] | 9000B | 1C
96 | | framesize=${9000} | phy_cores=${1}
97
98 | tc04-IMIX-1c-eth-l2patch-mrr
99 | | [Tags] | IMIX | 1C
100 | | framesize=IMIX_v4_1 | phy_cores=${1}
101
102 | tc05-64B-2c-eth-l2patch-mrr
103 | | [Tags] | 64B | 2C
104 | | framesize=${64} | phy_cores=${2}
105
106 | tc06-1518B-2c-eth-l2patch-mrr
107 | | [Tags] | 1518B | 2C
108 | | framesize=${1518} | phy_cores=${2}
109
110 | tc07-9000B-2c-eth-l2patch-mrr
111 | | [Tags] | 9000B | 2C
112 | | framesize=${9000} | phy_cores=${2}
113
114 | tc08-IMIX-2c-eth-l2patch-mrr
115 | | [Tags] | IMIX | 2C
116 | | framesize=IMIX_v4_1 | phy_cores=${2}
117
118 | tc09-64B-4c-eth-l2patch-mrr
119 | | [Tags] | 64B | 4C
120 | | framesize=${64} | phy_cores=${4}
121
122 | tc10-1518B-4c-eth-l2patch-mrr
123 | | [Tags] | 1518B | 4C
124 | | framesize=${1518} | phy_cores=${4}
125
126 | tc11-9000B-4c-eth-l2patch-mrr
127 | | [Tags] | 9000B | 4C
128 | | framesize=${9000} | phy_cores=${4}
129
130 | tc12-IMIX-4c-eth-l2patch-mrr
131 | | [Tags] | IMIX | 4C
132 | | framesize=IMIX_v4_1 | phy_cores=${4}