Python3: resources and libraries
[csit.git] / tests / vpp / perf / l2 / 2n1l-10ge2p1x710-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | DRV_AVF | GBP
19 |
20 | Suite Setup | Setup suite single link | performance_avf
21 | Suite Teardown | Tear down suite | performance
22 | Test Setup | Setup test
23 | Test Teardown | Tear down test | performance
24 |
25 | Test Template | Local template
26 |
27 | Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and GBP test
28 | ... | cases*
29 |
30 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
31 | ... | with single links between nodes.
32 | ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \
33 | ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
34 | ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
35 | ... | 2 VLAN subinterfaces (VID 100 and 200),\
36 | ... | 1 L2 BD with the 2 VLAN subinterfaces and a BVI,\
37 | ... | 1 GBP L3 RD,\
38 | ... | 1 GBP L2 BD with the L2 BD,\
39 | ... | 1 GBP EPG EPG-1 with sclass 100, the GBP L2 BD and L3 RD,\
40 | ... | 2 GBP external EP in EPG-1,\
41 | ... | 2 external subnets with sclass 200 and 300,\
42 | ... | Contracts allowing full communications between the 2 external subnets.\
43 | ... | DUT1 tested with ${nic_name} with VF enabled.
44 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
45 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
46 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
47 | ... | of packets transmitted. NDR and PDR are discovered for different\
48 | ... | Ethernet L2 frame sizes using MLRsearch library.\
49 | ... | Test packets are generated by TG on\
50 | ... | links to DUT. TG traffic profile contains two L3 flow-groups\
51 | ... | (flow-group per direction, 254 flows per flow-group) with all packets\
52 | ... | containing Ethernet header including IEEE 802.1Q tagging, IPv4 header\
53 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
54 | ... | addresses of the TG node interfaces.
55 | ... | *[Ref] Applicable standard specifications:* RFC2544.
56
57 *** Variables ***
58 | @{plugins_to_enable}= | avf_plugin.so | gbp_plugin.so | acl_plugin.so
59 | ${crypto_type}= | ${None}
60 | ${nic_name}= | Intel-X710
61 | ${nic_driver}= | avf
62 | ${osi_layer}= | L2
63 | ${overhead}= | ${4}
64 # Traffic profile:
65 | ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254-bvi
66
67 *** Keywords ***
68 | Local template
69 | | [Documentation]
70 | | ... | [Cfg] DUT runs L2BD with VLAN and GBP config with ${phy_cores}\
71 | | ... | physical core(s) for worker threads.
72 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
73 | |
74 | | ... | *Arguments:*
75 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
76 | | ... | Type: integer, string
77 | | ... | - phy_cores - Number of physical cores. Type: integer
78 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
79 | |
80 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
81 | |
82 | | Set Test Variable | \${frame_size}
83 | |
84 | | Given Set Max Rate And Jumbo
85 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
86 | | And Pre-initialize layer driver | ${nic_driver}
87 | | And Apply Startup configuration on all VPP DUTs
88 | | When Initialize layer driver | ${nic_driver}
89 | | And Initialize layer interface
90 | | And Initialize layer dot1q
91 | | And Initialize GBP routing domains
92 | | Then Find NDR and PDR intervals using optimized search
93
94 *** Test Cases ***
95 | tc01-64B-1c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
96 | | [Tags] | 64B | 1C
97 | | frame_size=${64} | phy_cores=${1}
98
99 | tc02-64B-2c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
100 | | [Tags] | 64B | 2C
101 | | frame_size=${64} | phy_cores=${2}
102
103 | tc03-64B-4c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
104 | | [Tags] | 64B | 4C
105 | | frame_size=${64} | phy_cores=${4}
106
107 | tc04-1518B-1c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
108 | | [Tags] | 1518B | 1C
109 | | frame_size=${1518} | phy_cores=${1}
110
111 | tc05-1518B-2c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
112 | | [Tags] | 1518B | 2C
113 | | frame_size=${1518} | phy_cores=${2}
114
115 | tc06-1518B-4c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
116 | | [Tags] | 1518B | 4C
117 | | frame_size=${1518} | phy_cores=${4}
118
119 | tc07-9000B-1c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
120 | | [Tags] | 9000B | 1C
121 | | frame_size=${9000} | phy_cores=${1}
122
123 | tc08-9000B-2c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
124 | | [Tags] | 9000B | 2C
125 | | frame_size=${9000} | phy_cores=${2}
126
127 | tc09-9000B-4c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
128 | | [Tags] | 9000B | 4C
129 | | frame_size=${9000} | phy_cores=${4}
130
131 | tc10-IMIX-1c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
132 | | [Tags] | IMIX | 1C
133 | | frame_size=IMIX_v4_1 | phy_cores=${1}
134
135 | tc11-IMIX-2c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
136 | | [Tags] | IMIX | 2C
137 | | frame_size=IMIX_v4_1 | phy_cores=${2}
138
139 | tc12-IMIX-4c-avf-dot1q-l2bdbasemaclrn-gbp-ndrpdr
140 | | [Tags] | IMIX | 4C
141 | | frame_size=IMIX_v4_1 | phy_cores=${4}