Remove leading tc[nn] from test names
[csit.git] / tests / vpp / perf / l2 / 2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-gbp-ndrpdr.robot
1 # Copyright (c) 2020 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | DRV_VFIO_PCI
19 | ... | RXQ_SIZE_0 | TXQ_SIZE_0 | GBP
20 | ... | dot1q-l2bdbasemaclrn-gbp
21 |
22 | Suite Setup | Setup suite topology interfaces | performance
23 | Suite Teardown | Tear down suite | performance
24 | Test Setup | Setup test | performance
25 | Test Teardown | Tear down test | performance
26 |
27 | Test Template | Local template
28 |
29 | Documentation | *RFC2544: Pkt throughput L2BD with IEEE 802.1Q and GBP test
30 | ... | cases*
31 |
32 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
33 | ... | with single links between nodes.
34 | ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \
35 | ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
36 | ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
37 | ... | 2 VLAN subinterfaces (VID 100 and 200),\
38 | ... | 1 L2 BD with the 2 VLAN subinterfaces and a BVI,\
39 | ... | 1 GBP L3 RD,\
40 | ... | 1 GBP L2 BD with the L2 BD,\
41 | ... | 1 GBP EPG EPG-1 with sclass 100, the GBP L2 BD and L3 RD,\
42 | ... | 2 GBP external EP in EPG-1,\
43 | ... | 2 external subnets with sclass 200 and 300,\
44 | ... | Contracts allowing full communications between the 2 external subnets.\
45 | ... | DUT1 tested with ${nic_name} with VF enabled.
46 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
47 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
48 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
49 | ... | of packets transmitted. NDR and PDR are discovered for different\
50 | ... | Ethernet L2 frame sizes using MLRsearch library.\
51 | ... | Test packets are generated by TG on\
52 | ... | links to DUT. TG traffic profile contains two L3 flow-groups\
53 | ... | (flow-group per direction, 254 flows per flow-group) with all packets\
54 | ... | containing Ethernet header including IEEE 802.1Q tagging, IPv4 header\
55 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC\
56 | ... | addresses of the TG node interfaces.
57 | ... | *[Ref] Applicable standard specifications:* RFC2544.
58
59 *** Variables ***
60 | @{plugins_to_enable}= | dpdk_plugin.so | gbp_plugin.so | acl_plugin.so
61 | ${crypto_type}= | ${None}
62 | ${nic_name}= | Intel-X710
63 | ${nic_driver}= | vfio-pci
64 | ${nic_rxq_size}= | 0
65 | ${nic_txq_size}= | 0
66 | ${nic_pfs}= | 2
67 | ${nic_vfs}= | 0
68 | ${osi_layer}= | L2
69 | ${overhead}= | ${4}
70 # Traffic profile:
71 | ${traffic_profile}= | trex-sl-dot1qip4-vlan1ip4src254ip4dst254-bvi
72
73 *** Keywords ***
74 | Local template
75 | | [Documentation]
76 | | ... | [Cfg] DUT runs L2BD with VLAN and GBP config with ${phy_cores}\
77 | | ... | physical core(s) for worker threads.
78 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
79 | |
80 | | ... | *Arguments:*
81 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
82 | | ... | Type: integer, string
83 | | ... | - phy_cores - Number of physical cores. Type: integer
84 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
85 | |
86 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
87 | |
88 | | Set Test Variable | \${frame_size}
89 | |
90 | | Given Set Max Rate And Jumbo
91 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
92 | | And Pre-initialize layer driver | ${nic_driver}
93 | | And Apply Startup configuration on all VPP DUTs
94 | | When Initialize layer driver | ${nic_driver}
95 | | And Initialize layer interface
96 | | And Initialize layer dot1q
97 | | And Initialize GBP routing domains
98 | | Then Find NDR and PDR intervals using optimized search
99
100 *** Test Cases ***
101 | 64B-1c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
102 | | [Tags] | 64B | 1C
103 | | frame_size=${64} | phy_cores=${1}
104
105 | 64B-2c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
106 | | [Tags] | 64B | 2C
107 | | frame_size=${64} | phy_cores=${2}
108
109 | 64B-4c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
110 | | [Tags] | 64B | 4C
111 | | frame_size=${64} | phy_cores=${4}
112
113 | 1518B-1c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
114 | | [Tags] | 1518B | 1C
115 | | frame_size=${1518} | phy_cores=${1}
116
117 | 1518B-2c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
118 | | [Tags] | 1518B | 2C
119 | | frame_size=${1518} | phy_cores=${2}
120
121 | 1518B-4c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
122 | | [Tags] | 1518B | 4C
123 | | frame_size=${1518} | phy_cores=${4}
124
125 | 9000B-1c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
126 | | [Tags] | 9000B | 1C
127 | | frame_size=${9000} | phy_cores=${1}
128
129 | 9000B-2c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
130 | | [Tags] | 9000B | 2C
131 | | frame_size=${9000} | phy_cores=${2}
132
133 | 9000B-4c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
134 | | [Tags] | 9000B | 4C
135 | | frame_size=${9000} | phy_cores=${4}
136
137 | IMIX-1c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
138 | | [Tags] | IMIX | 1C
139 | | frame_size=IMIX_v4_1 | phy_cores=${1}
140
141 | IMIX-2c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
142 | | [Tags] | IMIX | 2C
143 | | frame_size=IMIX_v4_1 | phy_cores=${2}
144
145 | IMIX-4c-dot1q-l2bdbasemaclrn-gbp-ndrpdr
146 | | [Tags] | IMIX | 4C
147 | | frame_size=IMIX_v4_1 | phy_cores=${4}