Create l2bdscale tests for 2-node topology
[csit.git] / tests / vpp / perf / l2 / 40ge2p1xl710-eth-l2bdbasemaclrn-mrr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Library | resources.libraries.python.NodePath
17 | ...
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
19 | ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE
20 | ...
21 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
22 | ... | L2 | Intel-XL710
23 | ...
24 | Suite Teardown | Tear down 3-node performance topology
25 | ...
26 | Test Setup | Set up performance test
27 | ...
28 | Test Teardown | Tear down performance mrr test
29 | ...
30 | Test Template | Local Template
31 | ...
32 | Documentation | *Raw results L2BD test cases*
33 | ...
34 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
35 | ... | with single links between nodes.
36 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
37 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
38 | ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p40GE NIC\
39 | ... | XL710-DA2 by Intel.
40 | ... | *[Ver] TG verification:* In MaxReceivedRate tests TG sends traffic\
41 | ... | at line rate and reports total received/sent packets over trial period.
42 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile\
43 | ... | contains two L3 flow-groups (flow-group per direction, 254 flows per\
44 | ... | flow-group) with all packets containing Ethernet header, IPv4 header\
45 | ... | with IP protocol=61 and static payload. MAC addresses are matching\
46 | ... | MAC addresses of the TG node interfaces.
47 | ... | *[Ref] Applicable standard specifications:* RFC2544.
48
49 *** Variables ***
50 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
51 | ${s_24.5G}= | ${24500000000}
52 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
53 | ${s_18.75Mpps}= | ${18750000}
54 # Traffic profile:
55 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
56
57 *** Keywords ***
58 | Local Template
59 | | [Documentation]
60 | | ... | [Cfg] Each DUT runs L2BD switching config and uses ${phy_cores}\
61 | | ... | physical core(s) for worker threads.
62 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
63 | | ... | trial throughput test.
64 | | ...
65 | | ... | *Arguments:*
66 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
67 | | ... | Type: integer, string
68 | | ... | - phy_cores - Number of physical cores. Type: integer
69 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
70 | | ...
71 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
72 | | ...
73 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
74 | | And Add PCI devices to all DUTs
75 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
76 | | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
77 | | And Add DPDK dev default RXD to all DUTs | 2048
78 | | And Add DPDK dev default TXD to all DUTs | 2048
79 | | And Apply startup configuration on all VPP DUTs
80 | | When Initialize L2 bridge domain in circular topology
81 | | Then Traffic should pass with maximum rate
82 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
83
84 *** Test Cases ***
85 | tc01-64B-1c-eth-l2bdbasemaclrn-mrr
86 | | [Tags] | 64B | 1C
87 | | framesize=${64} | phy_cores=${1}
88
89 | tc02-64B-2c-eth-l2bdbasemaclrn-mrr
90 | | [Tags] | 64B | 2C
91 | | framesize=${64} | phy_cores=${2}
92
93 | tc03-64B-4c-eth-l2bdbasemaclrn-mrr
94 | | [Tags] | 64B | 4C
95 | | framesize=${64} | phy_cores=${4}
96
97 | tc04-1518B-1c-eth-l2bdbasemaclrn-mrr
98 | | [Tags] | 1518B | 1C
99 | | framesize=${1518} | phy_cores=${1}
100
101 | tc05-1518B-2c-eth-l2bdbasemaclrn-mrr
102 | | [Tags] | 1518B | 2C
103 | | framesize=${1518} | phy_cores=${2}
104
105 | tc06-1518B-4c-eth-l2bdbasemaclrn-mrr
106 | | [Tags] | 1518B | 4C
107 | | framesize=${1518} | phy_cores=${4}
108
109 | tc07-9000B-1c-eth-l2bdbasemaclrn-mrr
110 | | [Tags] | 9000B | 1C
111 | | framesize=${9000} | phy_cores=${1}
112
113 | tc08-9000B-2c-eth-l2bdbasemaclrn-mrr
114 | | [Tags] | 9000B | 2C
115 | | framesize=${9000} | phy_cores=${2}
116
117 | tc09-9000B-4c-eth-l2bdbasemaclrn-mrr
118 | | [Tags] | 9000B | 4C
119 | | framesize=${9000} | phy_cores=${4}
120
121 | tc10-IMIX-1c-eth-l2bdbasemaclrn-mrr
122 | | [Tags] | IMIX | 1C
123 | | framesize=IMIX_v4_1 | phy_cores=${1}
124
125 | tc11-IMIX-2c-eth-l2bdbasemaclrn-mrr
126 | | [Tags] | IMIX | 2C
127 | | framesize=IMIX_v4_1 | phy_cores=${2}
128
129 | tc12-IMIX-4c-eth-l2bdbasemaclrn-mrr
130 | | [Tags] | IMIX | 4C
131 | | framesize=IMIX_v4_1 | phy_cores=${4}