Support suite tags in autogen
[csit.git] / tests / vpp / perf / nfv_density / dcr_memif / chain_ipsec / 10ge2p1x710-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR | TNL_20000
18 | ... | IPSEC | IPSECSW | IPSECINT | NIC_Intel-X710 | SCALE | 2DCR
19 | ... | DOCKER | 2R1C | NF_DENSITY | CHAIN | NF_VPPIP4 | 1DCR1T
20 | ... | AES_256_GCM | AES | DRV_VFIO_PCI
21 | ... | ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm
22 |
23 | Suite Setup | Setup suite single link | performance
24 | Suite Teardown | Tear down suite | performance
25 | Test Setup | Setup test
26 | Test Teardown | Tear down test | performance | container
27 |
28 | Test Template | Local Template
29 |
30 | Documentation | **RFC2544: Pkt throughput L2BD test cases with memif 1 chain
31 | ... | 2 docker container*
32 |
33 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
36 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
37 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
38 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
39 | ... | of packets transmitted. NDR and PDR are discovered for different\
40 | ... | Ethernet L2 frame sizes using MLRsearch library.\
41 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
42 | ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
43 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
44 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
45 | ... | addresses of the TG node interfaces.
46 | ... | *[Ref] Applicable standard specifications:* RFC4303 and RFC2544.
47
48 *** Variables ***
49 | @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
50 | ... | crypto_ia32_plugin.so | crypto_ipsecmb_plugin.so
51 | ... | crypto_openssl_plugin.so
52 | ${crypto_type}= | ${None}
53 | ${nic_name}= | Intel-X710
54 | ${nic_driver}= | vfio-pci
55 | ${osi_layer}= | L3
56 | ${overhead}= | ${54}
57 | ${tg_if1_ip4}= | 192.168.10.254
58 | ${dut1_if1_ip4}= | 192.168.10.1
59 | ${dut1_if2_ip4}= | 100.0.0.254
60 | ${dut2_if1_ip4}= | 200.0.0.1
61 | ${dut2_if2_ip4}= | 192.168.20.1
62 | ${tg_if2_ip4}= | 192.168.20.254
63 | ${raddr_ip4}= | 20.0.0.0
64 | ${laddr_ip4}= | 10.0.0.0
65 | ${addr_range}= | ${24}
66 | ${n_instances}= | ${2}
67 | ${n_tunnels}= | ${20000}
68 | ${nf_dtcr}= | ${1}
69 | ${nf_dtc}= | ${1}
70 # Traffic profile:
71 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4dst${n_tunnels}-${n_instances}cnf
72 # Container
73 | ${container_engine}= | Docker
74 | ${container_chain_topology}= | chain_ipsec
75
76 *** Keywords ***
77 | Local Template
78 | | [Documentation]
79 | | ... | [Cfg] DUT1 runs IPSec tunneling AES_256_GCM config to ${n_instances}.
80 | | ... | containers.
81 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
82 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
83 | |
84 | | ... | *Arguments:*
85 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
86 | | ... | Type: integer, string
87 | | ... | - phy_cores - Number of physical cores. Type: integer
88 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
89 | |
90 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
91 | |
92 | | Set Test Variable | \${frame_size}
93 | |
94 | | # These are enums (not strings) so they cannot be in Variables table.
95 | | ${encr_alg}= | Crypto Alg AES GCM 256
96 | | ${auth_alg}= | Set Variable | ${None}
97 | | ${ipsec_proto} = | IPsec Proto ESP
98 | |
99 | | Given Set Max Rate And Jumbo
100 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
101 | | And Pre-initialize layer driver | ${nic_driver}
102 | | And Apply startup configuration on all VPP DUTs
103 | | When Initialize layer driver | ${nic_driver}
104 | | And Initialize IPSec in 3-node circular topology
105 | | And Stop VPP service on all DUTs | ${nodes}
106 | | And VPP IPsec Create Tunnel Interfaces in Containers
107 | | ... | ${nodes} | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut1_if2}
108 | | ... | ${dut2_if1} | ${n_tunnels} | ${encr_alg} | ${auth_alg}
109 | | ... | ${laddr_ip4} | ${raddr_ip4} | ${addr_range} | ${n_instances}
110 | | And Start containers for test
111 | | ... | nf_chains=${1} | nf_nodes=${n_instances} | auto_scale=${False}
112 | | ... | pinning=${False}
113 | | And Start vswitch in container | phy_cores=${phy_cores} | rx_queues=${rxq}
114 | | Then Find NDR and PDR intervals using optimized search
115
116 *** Test Cases ***
117 | tc01-64B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
118 | | [Tags] | 64B | 1C
119 | | frame_size=${64} | phy_cores=${1}
120
121 | tc02-64B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
122 | | [Tags] | 64B | 2C
123 | | frame_size=${64} | phy_cores=${2}
124
125 | tc03-64B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
126 | | [Tags] | 64B | 4C
127 | | frame_size=${64} | phy_cores=${4}
128
129 | tc04-1518B-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
130 | | [Tags] | 1518B | 1C
131 | | frame_size=${1518} | phy_cores=${1}
132
133 | tc05-1518B-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
134 | | [Tags] | 1518B | 2C
135 | | frame_size=${1518} | phy_cores=${2}
136
137 | tc06-1518B-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
138 | | [Tags] | 1518B | 4C
139 | | frame_size=${1518} | phy_cores=${4}
140
141 | tc10-IMIX-1c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
142 | | [Tags] | IMIX | 1C
143 | | frame_size=IMIX_v4_1 | phy_cores=${1}
144
145 | tc11-IMIX-2c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
146 | | [Tags] | IMIX | 2C
147 | | frame_size=IMIX_v4_1 | phy_cores=${2}
148
149 | tc12-IMIX-4c-ethip4ipsec20000tnlsw-l2bd-1ch-4mif-2dcr1c-vppip4-aes256gcm-ndrpdr
150 | | [Tags] | IMIX | 4C
151 | | frame_size=IMIX_v4_1 | phy_cores=${4}