CSIT-1539 Aligning FUNC/PERF keywords - Phase III
[csit.git] / tests / vpp / perf / nfv_density / dcr_memif / pipeline / 2n-10ge2p1x710-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 | ...
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | MEMIF | DOCKER | 6R1C
19 | ... | NF_DENSITY | PIPELINE | NF_VPPIP4 | 6DCR1T
20 | ...
21 | Suite Setup | Setup suite single link | performance
22 | Suite Teardown | Tear down suite | performance
23 | Test Setup | Setup test
24 | Test Teardown | Tear down test | performance | container
25 | ...
26 | Test Template | Local Template
27 | ...
28 | Documentation | **RFC2544: Pkt throughput L2BD test cases with 12memif 6
29 | ... | pipelines 1 docker containers*
30 | ...
31 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with
32 | ... | single links between nodes.
33 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 bridge domain.
34 | ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 bridge domains
35 | ... | and MAC learning enabled. DUT1 tested with ${nic_name}.\
36 | ... | Container is connected to VPP via Memif interface. Container is running
37 | ... | same VPP version as running on DUT. Container is limited via cgroup to
38 | ... | use cores allocated from pool of isolated CPUs. There are no memory
39 | ... | contraints.
40 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
41 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
42 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
43 | ... | of packets transmitted. NDR and PDR are discovered for different\
44 | ... | Ethernet L2 frame sizes using MLRsearch library.\
45 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
46 | ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
47 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
48 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
49 | ... | addresses of the TG node interfaces.
50
51 *** Variables ***
52 | @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
53 | ${osi_layer}= | L3
54 | ${nic_name}= | Intel-X710
55 | ${overhead}= | ${0}
56 | ${nf_dtcr}= | ${2}
57 | ${nf_dtc}= | ${0.5}
58 # Traffic profile:
59 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-6c1n
60 # Container
61 | ${container_engine}= | Docker
62 | ${container_chain_topology}= | pipeline_ip4
63
64 *** Keywords ***
65 | Local Template
66 | | [Documentation]
67 | | ... | [Cfg] DUT runs L2BD switching config.
68 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
69 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
70 | | ...
71 | | ... | *Arguments:*
72 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
73 | | ... | Type: integer, string
74 | | ... | - phy_cores - Number of physical cores. Type: integer
75 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
76 | | ...
77 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
78 | | ...
79 | | Set Test Variable | \${frame_size}
80 | | ...
81 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
82 | | And Add PCI devices to all DUTs
83 | | And Set Max Rate And Jumbo And Handle Multi Seg
84 | | And Apply startup configuration on all VPP DUTs
85 | | And Start containers for test
86 | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
87 | | And Initialize L2 Bridge Domain for multiple pipelines with memif pairs
88 | | ... | nf_chains=${6} | nf_nodes=${1} | auto_scale=${False}
89 | | Then Find NDR and PDR intervals using optimized search
90
91 *** Test Cases ***
92 | tc01-64B-1c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
93 | | [Tags] | 64B | 1C
94 | | frame_size=${64} | phy_cores=${1}
95
96 | tc02-64B-2c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
97 | | [Tags] | 64B | 2C
98 | | frame_size=${64} | phy_cores=${2}
99
100 | tc03-64B-4c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
101 | | [Tags] | 64B | 4C
102 | | frame_size=${64} | phy_cores=${4}
103
104 | tc04-1518B-1c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
105 | | [Tags] | 1518B | 1C
106 | | frame_size=${1518} | phy_cores=${1}
107
108 | tc05-1518B-2c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
109 | | [Tags] | 1518B | 2C
110 | | frame_size=${1518} | phy_cores=${2}
111
112 | tc06-1518B-4c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
113 | | [Tags] | 1518B | 4C
114 | | frame_size=${1518} | phy_cores=${4}
115
116 | tc07-9000B-1c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
117 | | [Tags] | 9000B | 1C
118 | | frame_size=${9000} | phy_cores=${1}
119
120 | tc08-9000B-2c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
121 | | [Tags] | 9000B | 2C
122 | | frame_size=${9000} | phy_cores=${2}
123
124 | tc09-9000B-4c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
125 | | [Tags] | 9000B | 4C
126 | | frame_size=${9000} | phy_cores=${4}
127
128 | tc10-IMIX-1c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
129 | | [Tags] | IMIX | 1C
130 | | frame_size=IMIX_v4_1 | phy_cores=${1}
131
132 | tc11-IMIX-2c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
133 | | [Tags] | IMIX | 2C
134 | | frame_size=IMIX_v4_1 | phy_cores=${2}
135
136 | tc12-IMIX-4c-eth-l2bd-6pl-12mif-6dcr1t-vppip4-ndrpdr
137 | | [Tags] | IMIX | 4C
138 | | frame_size=IMIX_v4_1 | phy_cores=${4}