NF density tests with dtc=0.5 and dtcr=2
[csit.git] / tests / vpp / perf / nfv_density / vm_vhost / chain / 2n-10ge2p1x710-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM
19 | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 1R2C | 2VM2T
20 | ...
21 | Suite Setup | Set up 2-node performance topology with DUT's NIC model
22 | ... | L3 | ${nic_name}
23 | Suite Teardown | Tear down 2-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | Test Teardown | Tear down performance test with vhost
27 | ...
28 | Test Template | Local Template
29 | ...
30 | Documentation
31 | ... | *RFC2544: Pkt throughput L2BD test cases with 4 vhost 1 chain 2 VMs*
32 | ...
33 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
36 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-\
37 | ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via\
38 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
39 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
40 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
41 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
42 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
43 | ... | of packets transmitted. NDR and PDR are discovered for different\
44 | ... | Ethernet L2 frame sizes using MLRsearch library.\
45 | ... | Test packets are generated by TG on\
46 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
47 | ... | (flow-group per direction, 254 flows per flow-group) with all packets\
48 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
49 | ... | payload. MAC addresses are matching MAC addresses of NFs nodes\
50 | ... | interfaces.
51 | ... | *[Ref] Applicable standard specifications:* RFC2544.
52
53 *** Variables ***
54 | ${nic_name}= | Intel-X710
55 | ${overhead}= | ${0}
56 | ${nf_dtcr}= | ${1}
57 | ${nf_dtc}= | ${1}
58 # Traffic profile:
59 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-1c2n
60
61 *** Keywords ***
62 | Local Template
63 | | [Documentation]
64 | | ... | [Cfg] DUT runs L2BD switching config.
65 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
66 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
67 | | ...
68 | | ... | *Arguments:*
69 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
70 | | ... | Type: integer, string
71 | | ... | - phy_cores - Number of physical cores. Type: integer
72 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
73 | | ...
74 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
75 | | ...
76 | | Set Test Variable | \${frame_size}
77 | | ...
78 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
79 | | And Add PCI devices to all DUTs
80 | | Set Max Rate And Jumbo And Handle Multi Seg
81 | | And Apply startup configuration on all VPP DUTs
82 | | When Initialize L2 bridge domains for multiple chains with Vhost-User
83 | | ... | nf_chains=${1} | nf_nodes=${2}
84 | | And Configure chains of NFs connected via vhost-user
85 | | ... | nf_chains=${1} | nf_nodes=${2} | jumbo=${jumbo}
86 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vpp_chain_ip4
87 | | Then Find NDR and PDR intervals using optimized search
88
89 *** Test Cases ***
90 | tc01-64B-1c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
91 | | [Tags] | 64B | 1C
92 | | frame_size=${64} | phy_cores=${1}
93
94 | tc02-64B-2c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
95 | | [Tags] | 64B | 2C
96 | | frame_size=${64} | phy_cores=${2}
97
98 | tc03-64B-4c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
99 | | [Tags] | 64B | 4C
100 | | frame_size=${64} | phy_cores=${4}
101
102 | tc04-1518B-1c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
103 | | [Tags] | 1518B | 1C
104 | | frame_size=${1518} | phy_cores=${1}
105
106 | tc05-1518B-2c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
107 | | [Tags] | 1518B | 2C
108 | | frame_size=${1518} | phy_cores=${2}
109
110 | tc06-1518B-4c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
111 | | [Tags] | 1518B | 4C
112 | | frame_size=${1518} | phy_cores=${4}
113
114 | tc07-9000B-1c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
115 | | [Tags] | 9000B | 1C
116 | | frame_size=${9000} | phy_cores=${1}
117
118 | tc08-9000B-2c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
119 | | [Tags] | 9000B | 2C
120 | | frame_size=${9000} | phy_cores=${2}
121
122 | tc09-9000B-4c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
123 | | [Tags] | 9000B | 4C
124 | | frame_size=${9000} | phy_cores=${4}
125
126 | tc10-IMIX-1c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
127 | | [Tags] | IMIX | 1C
128 | | frame_size=IMIX_v4_1 | phy_cores=${1}
129
130 | tc11-IMIX-2c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
131 | | [Tags] | IMIX | 2C
132 | | frame_size=IMIX_v4_1 | phy_cores=${2}
133
134 | tc12-IMIX-4c-eth-l2bd-1ch-4vh-2vm2t-vppip4-ndrpdr
135 | | [Tags] | IMIX | 4C
136 | | frame_size=IMIX_v4_1 | phy_cores=${4}