doc: fixing documentation structure
[csit.git] / tests / vpp / perf / nfv_density / vm_vhost / chain / 2n-10ge2p1x710-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM | DRV_VFIO_PCI
19 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
20 | ... | VHOST_1024 | NF_DENSITY | NF_VPPIP4 | CHAIN | 4R4C | 16VM2T
21 | ... | eth-l2bd-4ch-32vh-16vm2t-vppip4
22 |
23 | Suite Setup | Setup suite topology interfaces | performance
24 | Suite Teardown | Tear down suite | performance
25 | Test Setup | Setup test | performance
26 | Test Teardown | Tear down test | performance | vhost
27 |
28 | Test Template | Local Template
29 |
30 | Documentation
31 | ... | **RFC2544: Pkt throughput L2BD test cases with 32 vhost 4 chains \
32 | ... | 16 VMs**
33 | ... |
34 | ... | - **[Top] Network Topologies:** TG-DUT1-TG 2-node circular topology \
35 | ... | with single links between nodes.
36 | ... |
37 | ... | - **[Enc] Packet Encapsulations:** Eth-IPv4 for L2 switching of IPv4.
38 | ... |
39 | ... | - **[Cfg] DUT configuration:** DUT1 is configured with L2 bridge- \
40 | ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via \
41 | ... | vhost-user interfaces. Guest is running VPP IPv4 interconnecting \
42 | ... | vhost-user interfaces, rxd/txd=1024. DUT1 is tested with ${nic_name}.
43 | ... |
44 | ... | - **[Ver] TG verification:** TG finds and reports throughput NDR (Non \
45 | ... | Drop Rate) with zero packet loss tolerance and throughput PDR \
46 | ... | (Partial Drop Rate) with non-zero packet loss tolerance (LT) \
47 | ... | expressed in percentage of packets transmitted. NDR and PDR are \
48 | ... | discovered for different Ethernet L2 frame sizes using MLRsearch \
49 | ... | library.
50 | ... | Test packets are generated by TG on \
51 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups \
52 | ... | (flow-group per direction, 254 flows per flow-group) with all packets \
53 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static \
54 | ... | payload. MAC addresses are matching MAC addresses of NFs nodes \
55 | ... | interfaces.
56 | ... |
57 | ... | - **[Ref] Applicable standard specifications:** RFC2544.
58
59 *** Variables ***
60 | @{plugins_to_enable}= | dpdk_plugin.so
61 | ${crypto_type}= | ${None}
62 | ${nic_name}= | Intel-X710
63 | ${nic_driver}= | vfio-pci
64 | ${nic_rxq_size}= | 0
65 | ${nic_txq_size}= | 0
66 | ${nic_pfs}= | 2
67 | ${nic_vfs}= | 0
68 | ${osi_layer}= | L2
69 | ${overhead}= | ${0}
70 | ${nf_dtcr}= | ${1}
71 | ${nf_dtc}= | ${1}
72 | ${nf_chains}= | ${4}
73 | ${nf_nodes}= | ${4}
74 # Traffic profile:
75 | ${traffic_profile}= | trex-stl-2n3n-ethip4-ip4src254-4c4n
76
77 *** Keywords ***
78 | Local Template
79 | | [Documentation]
80 | | ... | - **[Cfg]** DUT runs L2BD switching config. \
81 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
82 | | ... | - **[Ver]** Measure NDR and PDR values using MLRsearch algorithm.
83 | |
84 | | ... | *Arguments:*
85 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
86 | | ... | Type: integer, string
87 | | ... | - phy_cores - Number of physical cores. Type: integer
88 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
89 | |
90 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
91 | |
92 | | Set Test Variable | \${frame_size}
93 | |
94 | | Given Set Max Rate And Jumbo
95 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
96 | | And Pre-initialize layer driver | ${nic_driver}
97 | | And Apply startup configuration on all VPP DUTs
98 | | When Initialize layer driver | ${nic_driver}
99 | | And Initialize layer interface
100 | | ... | count=${nf_chains}
101 | | And Initialize L2 bridge domains for multiple chains with Vhost-User
102 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes}
103 | | And Configure chains of NFs connected via vhost-user
104 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
105 | | ... | use_tuned_cfs=${False} | auto_scale=${False} | vnf=vppip4_2vhostvr1024
106 | | Then Find NDR and PDR intervals using optimized search
107
108 *** Test Cases ***
109 | 64B-1c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr
110 | | [Tags] | 64B | 1C
111 | | frame_size=${64} | phy_cores=${1}
112
113 | 64B-2c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr
114 | | [Tags] | 64B | 2C
115 | | frame_size=${64} | phy_cores=${2}
116
117 | 1518B-1c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr
118 | | [Tags] | 1518B | 1C
119 | | frame_size=${1518} | phy_cores=${1}
120
121 | 1518B-2c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr
122 | | [Tags] | 1518B | 2C
123 | | frame_size=${1518} | phy_cores=${2}
124
125 | 9000B-1c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr
126 | | [Tags] | 9000B | 1C
127 | | frame_size=${9000} | phy_cores=${1}
128
129 | 9000B-2c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr
130 | | [Tags] | 9000B | 2C
131 | | frame_size=${9000} | phy_cores=${2}
132
133 | IMIX-1c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr
134 | | [Tags] | IMIX | 1C
135 | | frame_size=IMIX_v4_1 | phy_cores=${1}
136
137 | IMIX-2c-eth-l2bd-4ch-32vh-16vm2t-vppip4-ndrpdr
138 | | [Tags] | IMIX | 2C
139 | | frame_size=IMIX_v4_1 | phy_cores=${2}