Update of VPP_STABLE_VER and DPDK_STABLE_VER files
[csit.git] / tests / vpp / perf / srv6 / 10ge2p1x520-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X520-DA2 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY
19 | ... | SRv6_PROXY_MASQ | MEMIF | LXC
20 | ...
21 | Suite Setup | Run Keywords
22 | ... | Set up 3-node performance topology with DUT's NIC model | L3
23 | ... | Intel-X520-DA2
24 | ... | AND | Set up performance test suite with MEMIF
25 | ... | AND | Set up performance test suite with Masquerading SRv6 proxy
26 | ... | AND | Set up performance topology with containers
27 | ...
28 | Suite Teardown | Tear down 3-node performance topology with container
29 | ...
30 | Test Setup | Set up performance test
31 | ...
32 | Test Teardown | Tear down performance test with SRv6 with encapsulation
33 | ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
34 | ...
35 | Test Template | Local Template
36 | ...
37 | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
38 | ... | Masquerading SRv6 proxy test cases*
39 | ...
40 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
41 | ... | with single links between nodes.
42 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-LXC\
43 | ... | and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.
44 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
45 | ... | routing and static route, SR policy and steering policy for one\
46 | ... | direction and one SR behaviour (function) - End.AM - for other\
47 | ... | direction. DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic\
48 | ... | by Intel.
49 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
50 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
51 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
52 | ... | of packets transmitted. NDR and PDR are discovered for different\
53 | ... | Ethernet L2 frame sizes using MLRsearch library\
54 | ... | Test packets are generated by TG on\
55 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
56 | ... | (flow-group per direction, 253 flows per flow-group) with\
57 | ... | all packets containing Ethernet header,IPv6 header with static payload.\
58 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
59 | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
60 | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01.
61
62 *** Variables ***
63 # X520-DA2 bandwidth limit
64 | ${s_limit}= | ${10000000000}
65 # SIDs
66 | ${dut1_sid1}= | 2002:1::
67 | ${dut1_sid2}= | 2003:2::
68 | ${dut1_bsid}= | 2002:1::1
69 | ${dut2_sid1}= | 2002:2::
70 | ${dut2_sid1}= | 2002:2::
71 | ${dut2_sid2}= | 2003:1::
72 | ${dut2_bsid}= | 2003:1::1
73 | ${out_sid1_1}= | 2002:3::
74 | ${out_sid1_2}= | 2002:4::
75 | ${out_sid2_1}= | 2003:3::
76 | ${out_sid2_2}= | 2003:4::
77 | ${sid_prefix}= | ${64}
78 # IP settings
79 | ${tg_if1_ip6_subnet}= | 2001:1::
80 | ${tg_if2_ip6_subnet}= | 2001:2::
81 | ${dst_addr_nr}= | ${1}
82 | ${dut1_if1_ip6}= | 2001:1::1
83 | ${dut1_if2_ip6}= | 2001:3::1
84 | ${dut1-memif-1-if1_ip6}= | 3001:1::1
85 | ${dut1-memif-1-if2_ip6}= | 3001:1::2
86 | ${dut1_nh}= | 4002::
87 | ${dut2_if1_ip6}= | 2001:3::2
88 | ${dut2_if2_ip6}= | 2001:2::1
89 | ${dut2-memif-1-if1_ip6}= | 3002:1::1
90 | ${dut2-memif-1-if2_ip6}= | 3002:1::2
91 | ${dut2_nh}= | 4001::
92 | ${prefix}= | ${64}
93 # outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B
94 | ${srv6_overhead_3sids}= | ${96}
95 # Traffic profile:
96 | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
97 # LXC container
98 | ${container_count}= | ${1}
99 | ${container_engine}= | LXC
100 | ${container_image}= | ${EMPTY}
101 | ${container_install_dkms}= | ${FALSE}
102 | ${container_chain_topology}= | chain
103 # CPU settings
104 | ${system_cpus}= | ${1}
105 | ${vpp_cpus}= | ${5}
106 | ${container_cpus}= | ${5}
107
108 *** Keywords ***
109 | Local Template
110 | | [Documentation]
111 | | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
112 | | ... | routing and static route, SR policy and steering policy for one\
113 | | ... | direction and one SR behaviour (function) - End - for other direction.
114 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
115 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.
116 | | ...
117 | | ... | *Arguments:*
118 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
119 | | ... |   Type: integer, string
120 | | ... | - phy_cores - Number of physical cores. Type: integer
121 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
122 | | ...
123 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
124 | | ...
125 | | Set Test Variable | ${framesize}
126 | | Set Test Variable | ${min_rate} | ${10000}
127 | | ...
128 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
129 | | And Add PCI devices to all DUTs
130 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
131 | | ... | ${s_limit} | ${framesize} | overhead=${srv6_overhead_3sids}
132 | | And Apply startup configuration on all VPP DUTs
133 | | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'dynamic_proxy' behaviour in 3-node circular topology
134 | | Then Find NDR and PDR intervals using optimized search
135 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
136
137 *** Test Cases ***
138 | tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
139 | | [Tags] | 78B | 1C
140 | | framesize=${78} | phy_cores=${1}
141
142 | tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
143 | | [Tags] | 78B | 2C
144 | | framesize=${78} | phy_cores=${2}
145
146 | tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
147 | | [Tags] | 78B | 4C
148 | | framesize=${78} | phy_cores=${4}
149
150 | tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
151 | | [Tags] | 1518B | 1C
152 | | framesize=${1518} | phy_cores=${1}
153
154 | tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
155 | | [Tags] | 1518B | 2C
156 | | framesize=${1518} | phy_cores=${2}
157
158 | tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
159 | | [Tags] | 1518B | 4C
160 | | framesize=${1518} | phy_cores=${4}
161
162 | tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
163 | | [Tags] | 9000B | 1C
164 | | framesize=${9000} | phy_cores=${1}
165
166 | tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
167 | | [Tags] | 9000B | 2C
168 | | framesize=${9000} | phy_cores=${2}
169
170 | tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
171 | | [Tags] | 9000B | 4C
172 | | framesize=${9000} | phy_cores=${4}
173
174 | tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
175 | | [Tags] | IMIX | 1C
176 | | framesize=IMIX_v4_1 | phy_cores=${1}
177
178 | tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
179 | | [Tags] | IMIX | 2C
180 | | framesize=IMIX_v4_1 | phy_cores=${2}
181
182 | tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
183 | | [Tags] | IMIX | 4C
184 | | framesize=IMIX_v4_1 | phy_cores=${4}