Remove leading tc[nn] from test names
[csit.git] / tests / vpp / perf / srv6 / 10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
1 # Copyright (c) 2020 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY
19 | ... | SRv6_PROXY_MASQ | MEMIF | DOCKER | DRV_VFIO_PCI
20 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
21 | ... | ethip6srhip6-ip6base-srv6proxy-masq
22 |
23 | Suite Setup | Setup suite topology interfaces | performance
24 | Suite Teardown | Tear down suite | performance
25 | Test Setup | Setup test | performance
26 | Test Teardown | Tear down test | performance | srv6 | container
27 |
28 | Test Template | Local Template
29 |
30 | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
31 | ... | Masquerading SRv6 proxy test cases*
32 |
33 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-CNT\
36 | ... | and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.
37 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
38 | ... | routing and static route, SR policy and steering policy for one\
39 | ... | direction and one SR behaviour (function) - End.AM - for other\
40 | ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\
41 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
42 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
43 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
44 | ... | of packets transmitted. NDR and PDR are discovered for different\
45 | ... | Ethernet L2 frame sizes using MLRsearch library.\
46 | ... | Test packets are generated by TG on\
47 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
48 | ... | (flow-group per direction, 253 flows per flow-group) with\
49 | ... | all packets containing Ethernet header,IPv6 header with static payload.\
50 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
51 | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
52 | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01.
53
54 *** Variables ***
55 | @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | srv6am_plugin.so
56 | ${crypto_type}= | ${None}
57 | ${nic_name}= | Intel-X710
58 | ${nic_driver}= | vfio-pci
59 | ${nic_rxq_size}= | 0
60 | ${nic_txq_size}= | 0
61 | ${nic_pfs}= | 2
62 | ${nic_vfs}= | 0
63 | ${osi_layer}= | L3
64 | ${overhead}= | ${96}
65 # SIDs
66 | ${dut1_sid1}= | 2002:1::
67 | ${dut1_sid2}= | 2003:2::
68 | ${dut1_bsid}= | 2002:1::1
69 | ${dut2_sid1}= | 2002:2::
70 | ${dut2_sid2}= | 2003:1::
71 | ${dut2_bsid}= | 2003:1::1
72 | ${out_sid1_1}= | 2002:3::
73 | ${out_sid1_2}= | 2002:4::
74 | ${out_sid2_1}= | 2003:3::
75 | ${out_sid2_2}= | 2003:4::
76 | ${sid_prefix}= | ${64}
77 # IP settings
78 | ${tg_if1_ip6_subnet}= | 2001:1::
79 | ${tg_if2_ip6_subnet}= | 2001:2::
80 | ${dst_addr_nr}= | ${1}
81 | ${dut1_if1_ip6}= | 2001:1::1
82 | ${dut1_if2_ip6}= | 2001:3::1
83 | ${dut1-memif-1-if1_ip6}= | 3001:1::1
84 | ${dut1-memif-1-if2_ip6}= | 3001:1::2
85 | ${dut1_nh}= | 4002::
86 | ${dut2_if1_ip6}= | 2001:3::2
87 | ${dut2_if2_ip6}= | 2001:2::1
88 | ${dut2-memif-1-if1_ip6}= | 3002:1::1
89 | ${dut2-memif-1-if2_ip6}= | 3002:1::2
90 | ${dut2_nh}= | 4001::
91 | ${prefix}= | ${64}
92 | ${mem_prefix}= | ${128}
93 # Traffic profile:
94 | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
95 # Container
96 | ${container_engine}= | Docker
97 | ${container_chain_topology}= | chain
98
99 *** Keywords ***
100 | Local Template
101 | | [Documentation]
102 | | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
103 | | ... | routing and static route, SR policy and steering policy for one\
104 | | ... | direction and SR behaviour (function) - End.AM - for other direction.
105 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
106 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
107 | |
108 | | ... | *Arguments:*
109 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
110 | | ... | Type: integer, string
111 | | ... | - phy_cores - Number of physical cores. Type: integer
112 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
113 | |
114 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
115 | |
116 | | Set Test Variable | \${frame_size}
117 | |
118 | | Given Set Max Rate And Jumbo
119 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
120 | | And Pre-initialize layer driver | ${nic_driver}
121 | | And Apply startup configuration on all VPP DUTs
122 | | When Initialize layer driver | ${nic_driver}
123 | | And Initialize layer interface
124 | | And Start containers for test | nf_chains=${1} | nf_nodes=${1}
125 | | And Initialize SRv6 with 'masquerading' SR-unaware Service Function
126 | | Then Find NDR and PDR intervals using optimized search
127
128 *** Test Cases ***
129 | 78B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
130 | | [Tags] | 78B | 1C
131 | | frame_size=${78} | phy_cores=${1}
132
133 | 78B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
134 | | [Tags] | 78B | 2C
135 | | frame_size=${78} | phy_cores=${2}
136
137 | 78B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
138 | | [Tags] | 78B | 4C
139 | | frame_size=${78} | phy_cores=${4}
140
141 | 1518B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
142 | | [Tags] | 1518B | 1C
143 | | frame_size=${1518} | phy_cores=${1}
144
145 | 1518B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
146 | | [Tags] | 1518B | 2C
147 | | frame_size=${1518} | phy_cores=${2}
148
149 | 1518B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
150 | | [Tags] | 1518B | 4C
151 | | frame_size=${1518} | phy_cores=${4}
152
153 | 9000B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
154 | | [Tags] | 9000B | 1C
155 | | frame_size=${9000} | phy_cores=${1}
156
157 | 9000B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
158 | | [Tags] | 9000B | 2C
159 | | frame_size=${9000} | phy_cores=${2}
160
161 | 9000B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
162 | | [Tags] | 9000B | 4C
163 | | frame_size=${9000} | phy_cores=${4}
164
165 | IMIX-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
166 | | [Tags] | IMIX | 1C
167 | | frame_size=IMIX_v4_1 | phy_cores=${1}
168
169 | IMIX-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
170 | | [Tags] | IMIX | 2C
171 | | frame_size=IMIX_v4_1 | phy_cores=${2}
172
173 | IMIX-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
174 | | [Tags] | IMIX | 4C
175 | | frame_size=IMIX_v4_1 | phy_cores=${4}