Python3: resources and libraries
[csit.git] / tests / vpp / perf / srv6 / 10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY
19 | ... | SRv6_PROXY_MASQ | MEMIF | LXC | DRV_VFIO_PCI
20 |
21 | Suite Setup | Setup suite single link | performance
22 | Suite Teardown | Tear down suite | performance
23 | Test Setup | Setup test
24 | Test Teardown | Tear down test | performance | srv6 | container
25 |
26 | Test Template | Local Template
27 |
28 | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
29 | ... | Masquerading SRv6 proxy test cases*
30 |
31 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
32 | ... | with single links between nodes.
33 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2, DUTn-LXC\
34 | ... | and DUTn->TG, Eth-IPv6 on TG->DUTn for IPv6 routing over SRv6.
35 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
36 | ... | routing and static route, SR policy and steering policy for one\
37 | ... | direction and one SR behaviour (function) - End.AM - for other\
38 | ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\
39 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
40 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
41 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
42 | ... | of packets transmitted. NDR and PDR are discovered for different\
43 | ... | Ethernet L2 frame sizes using MLRsearch library.\
44 | ... | Test packets are generated by TG on\
45 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
46 | ... | (flow-group per direction, 253 flows per flow-group) with\
47 | ... | all packets containing Ethernet header,IPv6 header with static payload.\
48 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
49 | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
50 | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01.
51
52 *** Variables ***
53 | @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so | srv6am_plugin.so
54 | ${crypto_type}= | ${None}
55 | ${nic_name}= | Intel-X710
56 | ${nic_driver}= | vfio-pci
57 | ${osi_layer}= | L3
58 | ${overhead}= | ${96}
59 # SIDs
60 | ${dut1_sid1}= | 2002:1::
61 | ${dut1_sid2}= | 2003:2::
62 | ${dut1_bsid}= | 2002:1::1
63 | ${dut2_sid1}= | 2002:2::
64 | ${dut2_sid1}= | 2002:2::
65 | ${dut2_sid2}= | 2003:1::
66 | ${dut2_bsid}= | 2003:1::1
67 | ${out_sid1_1}= | 2002:3::
68 | ${out_sid1_2}= | 2002:4::
69 | ${out_sid2_1}= | 2003:3::
70 | ${out_sid2_2}= | 2003:4::
71 | ${sid_prefix}= | ${64}
72 # IP settings
73 | ${tg_if1_ip6_subnet}= | 2001:1::
74 | ${tg_if2_ip6_subnet}= | 2001:2::
75 | ${dst_addr_nr}= | ${1}
76 | ${dut1_if1_ip6}= | 2001:1::1
77 | ${dut1_if2_ip6}= | 2001:3::1
78 | ${dut1-memif-1-if1_ip6}= | 3001:1::1
79 | ${dut1-memif-1-if2_ip6}= | 3001:1::2
80 | ${dut1_nh}= | 4002::
81 | ${dut2_if1_ip6}= | 2001:3::2
82 | ${dut2_if2_ip6}= | 2001:2::1
83 | ${dut2-memif-1-if1_ip6}= | 3002:1::1
84 | ${dut2-memif-1-if2_ip6}= | 3002:1::2
85 | ${dut2_nh}= | 4001::
86 | ${prefix}= | ${64}
87 | ${mem_prefix}= | ${128}
88 # Traffic profile:
89 | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
90 # Container
91 | ${container_engine}= | LXC
92 | ${container_chain_topology}= | chain
93
94 *** Keywords ***
95 | Local Template
96 | | [Documentation]
97 | | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
98 | | ... | routing and static route, SR policy and steering policy for one\
99 | | ... | direction and one SR behaviour (function) - End - for other direction.
100 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
101 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
102 | |
103 | | ... | *Arguments:*
104 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
105 | | ... | Type: integer, string
106 | | ... | - phy_cores - Number of physical cores. Type: integer
107 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
108 | |
109 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
110 | |
111 | | Set Test Variable | \${frame_size}
112 | |
113 | | Given Set Max Rate And Jumbo
114 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
115 | | And Pre-initialize layer driver | ${nic_driver}
116 | | And Apply startup configuration on all VPP DUTs
117 | | When Initialize layer driver | ${nic_driver}
118 | | And Initialize layer interface
119 | | And Start containers for test | nf_chains=${1} | nf_nodes=${1}
120 | | And Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'masquerading' behaviour in 3-node circular topology
121 | | Then Find NDR and PDR intervals using optimized search
122
123 *** Test Cases ***
124 | tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
125 | | [Tags] | 78B | 1C
126 | | frame_size=${78} | phy_cores=${1}
127
128 | tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
129 | | [Tags] | 78B | 2C
130 | | frame_size=${78} | phy_cores=${2}
131
132 | tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
133 | | [Tags] | 78B | 4C
134 | | frame_size=${78} | phy_cores=${4}
135
136 | tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
137 | | [Tags] | 1518B | 1C
138 | | frame_size=${1518} | phy_cores=${1}
139
140 | tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
141 | | [Tags] | 1518B | 2C
142 | | frame_size=${1518} | phy_cores=${2}
143
144 | tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
145 | | [Tags] | 1518B | 4C
146 | | frame_size=${1518} | phy_cores=${4}
147
148 | tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
149 | | [Tags] | 9000B | 1C
150 | | frame_size=${9000} | phy_cores=${1}
151
152 | tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
153 | | [Tags] | 9000B | 2C
154 | | frame_size=${9000} | phy_cores=${2}
155
156 | tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
157 | | [Tags] | 9000B | 4C
158 | | frame_size=${9000} | phy_cores=${4}
159
160 | tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
161 | | [Tags] | IMIX | 1C
162 | | frame_size=IMIX_v4_1 | phy_cores=${1}
163
164 | tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
165 | | [Tags] | IMIX | 2C
166 | | frame_size=IMIX_v4_1 | phy_cores=${2}
167
168 | tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-masq-ndrpdr
169 | | [Tags] | IMIX | 4C
170 | | frame_size=IMIX_v4_1 | phy_cores=${4}