Align suite/test teardown/setup
[csit.git] / tests / vpp / perf / srv6 / 10ge2p1x710-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | SRv6 | IP6FWD | FEATURE | SRv6_PROXY
19 | ... | SRv6_PROXY_STAT | MEMIF | LXC
20 | ...
21 | Suite Setup | Run Keywords
22 | ... | Set up 3-node performance topology with DUT's NIC model | L3
23 | ... | ${nic_name}
24 | ... | AND | Set up performance test suite with MEMIF
25 | ... | AND | Set up performance test suite with Static SRv6 proxy
26 | Suite Teardown | Tear down suite | performance
27 | ...
28 | Test Setup | Set up performance test
29 | Test Teardown | Tear down test | performance | srv6 | container
30 | ...
31 | Test Template | Local Template
32 | ...
33 | Documentation | *Packet throughput Segment routing over IPv6 dataplane with\
34 | ... | Static SRv6 proxy test cases*
35 | ...
36 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
37 | ... | with single links between nodes.
38 | ... | *[Enc] Packet Encapsulations:* Eth-IPv6-SRH-IPv6 on DUT1-DUT2 and\
39 | ... | DUTn->TG, Eth-IPv6 on TG->DUTn and DUTn-LXC for IPv6 routing over SRv6.
40 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6\
41 | ... | routing and static route, SR policy and steering policy for one\
42 | ... | direction and one SR behaviour (function) - End.AS - for other\
43 | ... | direction. DUT1 and DUT2 are tested with ${nic_name}.\
44 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
45 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
46 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
47 | ... | of packets transmitted. NDR and PDR are discovered for different\
48 | ... | Ethernet L2 frame sizes using MLRsearch library.\
49 | ... | Test packets are generated by TG on\
50 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
51 | ... | (flow-group per direction, 253 flows per flow-group) with\
52 | ... | all packets containing Ethernet header,IPv6 header with static payload.\
53 | ... | MAC addresses are matching MAC addresses of the TG node interfaces.
54 | ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
55 | ... | draft 3 and Segment Routing for Service Chaining - internet draft 01.
56
57 *** Variables ***
58 | ${nic_name}= | Intel-X710
59 # outer IPv6 header + SRH with 3 SIDs: 40+(8+3*16)B
60 | ${overhead}= | ${96}
61 # SIDs
62 | ${dut1_sid1}= | 2002:1::
63 | ${dut1_sid2}= | 2003:2::
64 | ${dut1_bsid}= | 2002:1::1
65 | ${dut2_sid1}= | 2002:2::
66 | ${dut2_sid1}= | 2002:2::
67 | ${dut2_sid2}= | 2003:1::
68 | ${dut2_bsid}= | 2003:1::1
69 | ${out_sid1_1}= | 2002:3::
70 | ${out_sid1_2}= | 2002:4::
71 | ${out_sid2_1}= | 2003:3::
72 | ${out_sid2_2}= | 2003:4::
73 | ${sid_prefix}= | ${64}
74 # IP settings
75 | ${tg_if1_ip6_subnet}= | 2001:1::
76 | ${tg_if2_ip6_subnet}= | 2001:2::
77 | ${dst_addr_nr}= | ${1}
78 | ${dut1_if1_ip6}= | 2001:1::1
79 | ${dut1_if2_ip6}= | 2001:3::1
80 | ${dut1-memif-1-if1_ip6}= | 3001:1::1
81 | ${dut1-memif-1-if2_ip6}= | 3001:1::2
82 | ${dut1_nh}= | 4002::
83 | ${dut2_if1_ip6}= | 2001:3::2
84 | ${dut2_if2_ip6}= | 2001:2::1
85 | ${dut2-memif-1-if1_ip6}= | 3002:1::1
86 | ${dut2-memif-1-if2_ip6}= | 3002:1::2
87 | ${dut2_nh}= | 4001::
88 | ${prefix}= | ${64}
89 # Traffic profile:
90 | ${traffic_profile}= | trex-sl-3n-ethip6-ip6src253
91 # Container
92 | ${container_engine}= | LXC
93 | ${container_chain_topology}= | chain
94
95 *** Keywords ***
96 | Local Template
97 | | [Documentation]
98 | | ... | [Cfg] DUT1 and DUT2 are configured with IPv6\
99 | | ... | routing and static route, SR policy and steering policy for one\
100 | | ... | direction and one SR behaviour (function) - End - for other direction.
101 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
102 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
103 | | ...
104 | | ... | *Arguments:*
105 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
106 | | ... |   Type: integer, string
107 | | ... | - phy_cores - Number of physical cores. Type: integer
108 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
109 | | ...
110 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
111 | | ...
112 | | Set Test Variable | \${frame_size}
113 | | ...
114 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
115 | | And Add PCI devices to all DUTs
116 | | Set Max Rate And Jumbo And Handle Multi Seg
117 | | And Apply startup configuration on all VPP DUTs
118 | | And Set up performance test with containers | nf_chains=${1} | nf_nodes=${1}
119 | | When Initialize IPv6 forwarding over SRv6 with endpoint to SR-unaware Service Function via 'static_proxy' behaviour in 3-node circular topology
120 | | Then Find NDR and PDR intervals using optimized search
121
122 *** Test Cases ***
123 | tc01-78B-1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
124 | | [Tags] | 78B | 1C
125 | | frame_size=${78} | phy_cores=${1}
126
127 | tc02-78B-2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
128 | | [Tags] | 78B | 2C
129 | | frame_size=${78} | phy_cores=${2}
130
131 | tc03-78B-4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
132 | | [Tags] | 78B | 4C
133 | | frame_size=${78} | phy_cores=${4}
134
135 | tc04-1518B-1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
136 | | [Tags] | 1518B | 1C
137 | | frame_size=${1518} | phy_cores=${1}
138
139 | tc05-1518B-2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
140 | | [Tags] | 1518B | 2C
141 | | frame_size=${1518} | phy_cores=${2}
142
143 | tc06-1518B-4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
144 | | [Tags] | 1518B | 4C
145 | | frame_size=${1518} | phy_cores=${4}
146
147 | tc07-9000B-1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
148 | | [Tags] | 9000B | 1C
149 | | frame_size=${9000} | phy_cores=${1}
150
151 | tc08-9000B-2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
152 | | [Tags] | 9000B | 2C
153 | | frame_size=${9000} | phy_cores=${2}
154
155 | tc09-9000B-4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
156 | | [Tags] | 9000B | 4C
157 | | frame_size=${9000} | phy_cores=${4}
158
159 | tc10-IMIX-1c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
160 | | [Tags] | IMIX | 1C
161 | | frame_size=IMIX_v4_1 | phy_cores=${1}
162
163 | tc11-IMIX-2c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
164 | | [Tags] | IMIX | 2C
165 | | frame_size=IMIX_v4_1 | phy_cores=${2}
166
167 | tc12-IMIX-4c-ethip6srhip6-ip6base-srv6proxy-stat-ndrpdr
168 | | [Tags] | IMIX | 4C
169 | | frame_size=IMIX_v4_1 | phy_cores=${4}