46db16b48aa11264c6908f666b8a2e96e424ee8a
[csit.git] / tests / vpp / perf / vm_vhost / 10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Library | resources.libraries.python.QemuUtils
17 | ...
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
19 | ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | VHOST | VM | VHOST_1024
20 | ... | CFS_OPT
21 | ...
22 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
23 | ... | L2 | Intel-X520-DA2
24 | Suite Teardown | Tear down 3-node performance topology
25 | ...
26 | Test Setup | Set up performance test
27 | Test Teardown | Tear down performance mrr test with vhost and VM with dpdk-testpmd
28 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
29 | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
30 | ...
31 | Test Template | Local Template
32 | ...
33 | Documentation | *Raw results L2BD test cases with vhost*
34 | ...
35 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
36 | ... | with single links between nodes.
37 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q
38 | ... | tagging is applied on link between DUT1 and DUT2.
39 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
40 | ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
41 | ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
42 | ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
43 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
44 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
45 | ... | io, rxd/txd=1024, burst=64. Scheduler policy is set to SCHED_RR with
46 | ... | priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE NIC X520
47 | ... | Niantic by Intel..
48 | ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
49 | ... | at line rate and reports total received/sent packets over trial period.
50 | ... | Test packets are generated by TG on
51 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
52 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
53 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
54 | ... | payload. MAC addresses are matching MAC addresses of the TG node
55 | ... | interfaces.
56 | ... | *[Ref] Applicable standard specifications:* RFC2544.
57
58 *** Variables ***
59 # X520-DA2 bandwidth limit
60 | ${s_limit}= | ${10000000000}
61 # Traffic profile:
62 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
63
64 *** Keywords ***
65 | Local Template
66 | | [Documentation]
67 | | ... | [Cfg] DUT runs L2BD switching config.
68 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
69 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
70 | | ... | trial throughput test.
71 | | ...
72 | | ... | *Arguments:*
73 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
74 | | ... | Type: integer, string
75 | | ... | - phy_cores - Number of physical cores. Type: integer
76 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
77 | | ...
78 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
79 | | ...
80 | | ${dut1_vm_refs}= | Create Dictionary
81 | | ${dut2_vm_refs}= | Create Dictionary
82 | | Set Test Variable | ${dut1_vm_refs}
83 | | Set Test Variable | ${dut2_vm_refs}
84 | | ...
85 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
86 | | And Add PCI devices to all DUTs
87 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
88 | | ... | ${s_limit} | ${framesize}
89 | | And Apply startup configuration on all VPP DUTs
90 | | When Initialize L2 bridge domains with Vhost-User | vm_count=${1}
91 | | And Configure guest VMs with dpdk-testpmd connected via vhost-user
92 | | ... | vm_count=${1} | jumbo=${jumbo} | perf_qemu_qsz=${1024}
93 | | ... | use_tuned_cfs=${True}
94 | | And Setup Scheduler Policy for Vpp On All DUTs
95 | | Then Traffic should pass with maximum rate
96 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
97
98 *** Test Cases ***
99 | tc01-64B-1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
100 | | [Tags] | 64B | 1C
101 | | framesize=${64} | phy_cores=${1}
102
103 | tc02-64B-2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
104 | | [Tags] | 64B | 2C
105 | | framesize=${64} | phy_cores=${2}
106
107 | tc03-64B-4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
108 | | [Tags] | 64B | 4C
109 | | framesize=${64} | phy_cores=${4}
110
111 | tc04-1518B-1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
112 | | [Tags] | 1518B | 1C
113 | | framesize=${1518} | phy_cores=${1}
114
115 | tc05-1518B-2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
116 | | [Tags] | 1518B | 2C
117 | | framesize=${1518} | phy_cores=${2}
118
119 | tc06-1518B-4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
120 | | [Tags] | 1518B | 4C
121 | | framesize=${1518} | phy_cores=${4}
122
123 | tc07-9000B-1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
124 | | [Tags] | 9000B | 1C
125 | | framesize=${9000} | phy_cores=${1}
126
127 | tc08-9000B-2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
128 | | [Tags] | 9000B | 2C
129 | | framesize=${9000} | phy_cores=${2}
130
131 | tc09-9000B-4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
132 | | [Tags] | 9000B | 4C
133 | | framesize=${9000} | phy_cores=${4}
134
135 | tc10-IMIX-1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
136 | | [Tags] | IMIX | 1C
137 | | framesize=IMIX_v4_1 | phy_cores=${1}
138
139 | tc11-IMIX-2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
140 | | [Tags] | IMIX | 2C
141 | | framesize=IMIX_v4_1 | phy_cores=${2}
142
143 | tc12-IMIX-4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-cfsrr1-mrr
144 | | [Tags] | IMIX | 4C
145 | | framesize=IMIX_v4_1 | phy_cores=${4}