CSIT-845 Capture VPP core-dump from vpp crash on DUTs
[csit.git] / tests / vpp / perf / vm_vhost / 10ge2p1x520-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Library | resources.libraries.python.QemuUtils
17 | ...
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
19 | ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | VHOST | VM | VHOST_256
20 | ... | CFS_OPT
21 | ...
22 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
23 | ... | L3 | Intel-X520-DA2
24 | Suite Teardown | Tear down 3-node performance topology
25 | ...
26 | Test Setup | Set up performance test
27 | Test Teardown | Tear down performance mrr test with vhost and VM with dpdk-testpmd
28 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
29 | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
30 | ...
31 | Test Template | Local Template
32 | ...
33 | Documentation | *Raw results IP4 test cases with vhost*
34 | ...
35 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
36 | ... | with single links between nodes.
37 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
38 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
39 | ... | routing and two static IPv4 /24 route entries. Qemu Guest is connected
40 | ... | to VPP via vhost-user interfaces. Guest is running DPDK testpmd
41 | ... | interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9
42 | ... | and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages),
43 | ... | 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is
44 | ... | set to mac, rxd/txd=256, burst=64. Scheduler policy is set to SCHED_RR
45 | ... | with priority 1 for all Qemu CPUs. DUT1, DUT2 are tested with 2p10GE
46 | ... | NIC X520 Niantic by Intel.
47 | ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
48 | ... | at line rate and reports total received/sent packets over trial period.
49 | ... | Test packets are generated by TG on
50 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
51 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
52 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
53 | ... | payload. MAC addresses are matching MAC addresses of the TG node
54 | ... | interfaces.
55 | ... | *[Ref] Applicable standard specifications:* RFC2544.
56
57 *** Variables ***
58 # X520-DA2 bandwidth limit
59 | ${s_limit}= | ${10000000000}
60 # Traffic profile:
61 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src253
62
63 *** Keywords ***
64 | Local Template
65 | | [Documentation]
66 | | ... | [Cfg] DUT runs IP4 routing config with required number of threads,\
67 | | ... | phy cores and receive queues per NIC port.
68 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
69 | | ... | trial throughput test.
70 | | ...
71 | | ... | *Arguments:*
72 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
73 | | ... | Type: integer, string
74 | | ... | - phy_cores - Number of physical cores. Type: integer
75 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
76 | | ...
77 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
78 | | ...
79 | | Set Test Variable | ${use_tuned_cfs} | ${True}
80 | | ${dut1_vm_refs}= | Create Dictionary
81 | | ${dut2_vm_refs}= | Create Dictionary
82 | | Set Test Variable | ${dut1_vm_refs}
83 | | Set Test Variable | ${dut2_vm_refs}
84 | | ...
85 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
86 | | And Add PCI devices to all DUTs
87 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
88 | | ... | ${s_limit} | ${framesize}
89 | | And Apply startup configuration on all VPP DUTs
90 | | When Initialize IPv4 forwarding with vhost in 3-node circular topology
91 | | ... | vm_count=${1}
92 | | And Configure guest VMs with dpdk-testpmd-mac connected via vhost-user
93 | | ... | vm_count=${1} | jumbo=${jumbo} | perf_qemu_qsz=${256}
94 | | ... | use_tuned_cfs=${True}
95 | | Setup Scheduler Policy for Vpp On All DUTs
96 | | Then Traffic should pass with maximum rate
97 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
98
99 *** Test Cases ***
100 | tc01-64B-1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
101 | | [Tags] | 64B | 1C
102 | | framesize=${64} | phy_cores=${1}
103
104 | tc02-64B-2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
105 | | [Tags] | 64B | 2C
106 | | framesize=${64} | phy_cores=${2}
107
108 | tc03-64B-4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
109 | | [Tags] | 64B | 4C
110 | | framesize=${64} | phy_cores=${4}
111
112 | tc04-1518B-1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
113 | | [Tags] | 1518B | 1C
114 | | framesize=${1518} | phy_cores=${1}
115
116 | tc05-1518B-2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
117 | | [Tags] | 1518B | 2C
118 | | framesize=${1518} | phy_cores=${2}
119
120 | tc06-1518B-4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
121 | | [Tags] | 1518B | 4C
122 | | framesize=${1518} | phy_cores=${4}
123
124 | tc07-9000B-1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
125 | | [Tags] | 9000B | 1C
126 | | framesize=${9000} | phy_cores=${1}
127
128 | tc08-9000B-2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
129 | | [Tags] | 9000B | 2C
130 | | framesize=${9000} | phy_cores=${2}
131
132 | tc09-9000B-4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
133 | | [Tags] | 9000B | 4C
134 | | framesize=${9000} | phy_cores=${4}
135
136 | tc10-IMIX-1c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
137 | | [Tags] | IMIX | 1C
138 | | framesize=IMIX_v4_1 | phy_cores=${1}
139
140 | tc11-IMIX-2c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
141 | | [Tags] | IMIX | 2C
142 | | framesize=IMIX_v4_1 | phy_cores=${2}
143
144 | tc12-IMIX-4c-ethip4-ip4base-eth-2vhostvr256-1vm-cfsrr1-mrr
145 | | [Tags] | IMIX | 4C
146 | | framesize=IMIX_v4_1 | phy_cores=${4}