1ae7e14821a7a7fd21c4a65e6c665ea7b800e8d0
[csit.git] / tests / vpp / perf / vm_vhost / 10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
18 | ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
19 | ... | VHOST | 1VM | VHOST_1024
20 | ...
21 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
22 | ... | L2 | Intel-X520-DA2
23 | Suite Teardown | Tear down 3-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | Test Teardown | Tear down performance mrr test with vhost and VM with dpdk-testpmd
27 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
28 | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
29 | ...
30 | Test Template | Local Template
31 | ...
32 | Documentation | *Raw results L2BD test cases with VXLANoIPv4
33 | ... | and vhost*
34 | ...
35 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
36 | ... | with single links between nodes.
37 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
38 | ... | Eth-IPv4-VXLAN-Eth-IPv4 is applied on link between DUT1 and DUT2.
39 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-
40 | ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
41 | ... | vhost-user interfaces. Guest is running DPDK testpmd interconnecting
42 | ... | vhost-user interfaces using 5 cores pinned to cpus 5-9 and 2048M
43 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
44 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
45 | ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE NIC X520
46 | ... | Niantic by Intel.
47 | ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
48 | ... | at line rate and reports total received/sent packets over trial period.
49 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
50 | ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
51 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
52 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
53 | ... | addresses of the TG node interfaces.
54 | ... | *[Ref] Applicable standard specifications:* RFC7348.
55
56 *** Variables ***
57 # Socket names
58 | ${bd_id1}= | 1
59 | ${bd_id2}= | 2
60 | ${sock1}= | /tmp/sock-1-${bd_id1}
61 | ${sock2}= | /tmp/sock-1-${bd_id2}
62 # X520-DA2 bandwidth limit
63 | ${s_limit}= | ${10000000000}
64 | ${overhead}= | ${50}
65 # Traffic profile:
66 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
67
68 *** Keywords ***
69 | Local Template
70 | | [Documentation]
71 | | ... | [Cfg] DUT runs L2BD switching config.
72 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
73 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
74 | | ... | trial throughput test.
75 | | ...
76 | | ... | *Arguments:*
77 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
78 | | ... | Type: integer, string
79 | | ... | - phy_cores - Number of physical cores. Type: integer
80 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
81 | | ...
82 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
83 | | ...
84 | | ${dut1_vm_refs}= | Create Dictionary
85 | | ${dut2_vm_refs}= | Create Dictionary
86 | | Set Test Variable | ${dut1_vm_refs}
87 | | Set Test Variable | ${dut2_vm_refs}
88 | | ...
89 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
90 | | And Add PCI devices to all DUTs
91 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
92 | | ... | ${s_limit} | ${framesize} | overhead=${overhead}
93 | | And Apply startup configuration on all VPP DUTs
94 | | When Initialize L2 bridge domains with Vhost-User and VXLANoIPv4 in 3-node circular topology
95 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2}
96 | | And Configure guest VMs with dpdk-testpmd connected via vhost-user
97 | | ... | vm_count=${1} | jumbo=${jumbo} | perf_qemu_qsz=${1024}
98 | | ... | use_tuned_cfs=${False}
99 | | Then Traffic should pass with maximum rate
100 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
101
102 *** Test Cases ***
103 | tc01-64B-1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
104 | | [Tags] | 64B | 1C
105 | | framesize=${64} | phy_cores=${1}
106
107 | tc02-64B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
108 | | [Tags] | 64B | 2C
109 | | framesize=${64} | phy_cores=${2}
110
111 | tc03-64B-4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
112 | | [Tags] | 64B | 4C
113 | | framesize=${64} | phy_cores=${4}
114
115 | tc04-1518B-1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
116 | | [Tags] | 1518B | 1C
117 | | framesize=${1518} | phy_cores=${1}
118
119 | tc05-1518B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
120 | | [Tags] | 1518B | 2C
121 | | framesize=${1518} | phy_cores=${2}
122
123 | tc06-1518B-4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
124 | | [Tags] | 1518B | 4C
125 | | framesize=${1518} | phy_cores=${4}
126
127 | tc07-9000B-1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
128 | | [Tags] | 9000B | 1C
129 | | framesize=${9000} | phy_cores=${1}
130
131 | tc08-9000B-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
132 | | [Tags] | 9000B | 2C
133 | | framesize=${9000} | phy_cores=${2}
134
135 | tc09-9000B-4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
136 | | [Tags] | 9000B | 4C
137 | | framesize=${9000} | phy_cores=${4}
138
139 | tc10-IMIX-1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
140 | | [Tags] | IMIX | 1C
141 | | framesize=IMIX_v4_1 | phy_cores=${1}
142
143 | tc11-IMIX-2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
144 | | [Tags] | IMIX | 2C
145 | | framesize=IMIX_v4_1 | phy_cores=${2}
146
147 | tc12-IMIX-4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
148 | | [Tags] | IMIX | 4C
149 | | framesize=IMIX_v4_1 | phy_cores=${4}