Perf: Add perfmon_plugin for telemetry
[csit.git] / tests / vpp / perf / vm_vhost / 10ge2p1x710-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr.robot
1 # Copyright (c) 2021 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/shared/default.robot
16 |
17 | Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
19 | ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
20 | ... | LBOND_2L | NF_VPPL2XC | DRV_VFIO_PCI
21 | ... | RXQ_SIZE_0 | TXQ_SIZE_0
22 | ... | 2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc
23 |
24 | Suite Setup | Setup suite topology interfaces | performance
25 | Suite Teardown | Tear down suite | performance
26 | Test Setup | Setup test | performance
27 | Test Teardown | Tear down test | performance | vhost
28 |
29 | Test Template | Local Template
30 |
31 | Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost and vpp
32 | ... | link bonding*
33 |
34 | ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology
35 | ... | with single links between TG and DUT nodes and double link between DUT
36 | ... | nodes.
37 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. 802.1q
38 | ... | tagging is applied on link between DUT1 and DUT2.
39 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
40 | ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
41 | ... | DUT2 and L2 bridge-domain with MAC learning enabled. Qemu VNFs are \
42 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
43 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
44 | ... | tested with ${nic_name}.
45 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
46 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
47 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
48 | ... | of packets transmitted. NDR and PDR are discovered for different\
49 | ... | Ethernet L2 frame sizes using MLRsearch library.\
50 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
51 | ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
52 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
53 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
54 | ... | addresses of the TG node interfaces.
55 | ... | *[Ref] Applicable standard specifications:* RFC2544.
56
57 *** Variables ***
58 | @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | lacp_plugin.so
59 | ${crypto_type}= | ${None}
60 | ${nic_name}= | Intel-X710
61 | ${nic_driver}= | vfio-pci
62 | ${nic_rxq_size}= | 0
63 | ${nic_txq_size}= | 0
64 | ${nic_pfs}= | 4
65 | ${nic_vfs}= | 0
66 | ${osi_layer}= | L2
67 | ${overhead}= | ${4}
68 | ${subid}= | 10
69 | ${tag_rewrite}= | pop-1
70 | ${nf_dtcr}= | ${1}
71 | ${nf_dtc}= | ${1}
72 | ${nf_chains}= | ${1}
73 | ${nf_nodes}= | ${1}
74 # Link bonding config
75 | ${bond_mode}= | lacp
76 | ${lb_mode}= | l34
77 | ${bd_id1}= | 1
78 | ${bd_id2}= | 2
79 # Traffic profile:
80 | ${traffic_profile}= | trex-stl-3n-ethip4-ip4src254
81
82 *** Keywords ***
83 | Local Template
84 | | [Documentation]
85 | | ... | [Cfg] DUT runs L2BD switching config.
86 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
87 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
88 | |
89 | | ... | *Arguments:*
90 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
91 | | ... | Type: integer, string
92 | | ... | - phy_cores - Number of physical cores. Type: integer
93 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
94 | |
95 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
96 | |
97 | | Set Test Variable | \${frame_size}
98 | | Set Test Variable | ${vlan_strip_off} | ${TRUE}
99 | |
100 | | Given Set Max Rate And Jumbo
101 | | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
102 | | And Pre-initialize layer driver | ${nic_driver}
103 | | And Apply startup configuration on all VPP DUTs
104 | | When Initialize layer driver | ${nic_driver}
105 | | And Initialize L2 bridge domains with Vhost-User and VLAN with VPP link bonding in a 3-node circular topology
106 | | ... | ${bd_id1} | ${bd_id2} | ${subid}
107 | | ... | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
108 | | And Configure chains of NFs connected via vhost-user
109 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
110 | | ... | use_tuned_cfs=${False} | auto_scale=${True}
111 | | ... | vnf=vppl2xc_2vhostvr1024
112 | | Then Find NDR and PDR intervals using optimized search
113
114 *** Test Cases ***
115 | 64B-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
116 | | [Tags] | 64B | 1C
117 | | frame_size=${64} | phy_cores=${1}
118
119 | 64B-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
120 | | [Tags] | 64B | 2C
121 | | frame_size=${64} | phy_cores=${2}
122
123 | 64B-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
124 | | [Tags] | 64B | 4C
125 | | frame_size=${64} | phy_cores=${4}
126
127 | 1518B-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
128 | | [Tags] | 1518B | 1C
129 | | frame_size=${1518} | phy_cores=${1}
130
131 | 1518B-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
132 | | [Tags] | 1518B | 2C
133 | | frame_size=${1518} | phy_cores=${2}
134
135 | 1518B-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
136 | | [Tags] | 1518B | 4C
137 | | frame_size=${1518} | phy_cores=${4}
138
139 | 9000B-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
140 | | [Tags] | 9000B | 1C
141 | | frame_size=${9000} | phy_cores=${1}
142
143 | 9000B-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
144 | | [Tags] | 9000B | 2C
145 | | frame_size=${9000} | phy_cores=${2}
146
147 | 9000B-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
148 | | [Tags] | 9000B | 4C
149 | | frame_size=${9000} | phy_cores=${4}
150
151 | IMIX-1c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
152 | | [Tags] | IMIX | 1C
153 | | frame_size=IMIX_v4_1 | phy_cores=${1}
154
155 | IMIX-2c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
156 | | [Tags] | IMIX | 2C
157 | | frame_size=IMIX_v4_1 | phy_cores=${2}
158
159 | IMIX-4c-2lbvpplacp-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-vppl2xc-ndrpdr
160 | | [Tags] | IMIX | 4C
161 | | frame_size=IMIX_v4_1 | phy_cores=${4}