CSIT-1521 Convert NestedVM testcase into KernelVM
[csit.git] / tests / vpp / perf / vm_vhost / 10ge2p1x710-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 3_NODE_DOUBLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | DOT1Q | L2XCFWD | BASE | VHOST | 1VM
19 | ... | VHOST_1024 | LBOND | LBOND_VPP | LBOND_MODE_LACP | LBOND_LB_L34
20 | ... | LBOND_2L
21 | ...
22 | Suite Setup | Run Keywords
23 | ... | Set up 3-node performance topology with DUT's NIC model with double link between DUTs
24 | ... | L2 | ${nic_name}
25 | ... | AND | Set up performance test suite with LACP mode link bonding
26 | Suite Teardown | Tear down 3-node performance topology
27 | ...
28 | Test Setup | Set up performance test
29 | Test Teardown | Tear down performance test with vhost
30 | ...
31 | Test Template | Local Template
32 | ...
33 | Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost and vpp
34 | ... | link bonding*
35 | ...
36 | ... | *[Top] Network Topologies:* TG-DUT1=DUT2-TG 3-node circular topology
37 | ... | with single links between TG and DUT nodes and double link between DUT
38 | ... | nodes.
39 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 cross connect. 802.1q
40 | ... | tagging is applied on link between DUT1 and DUT2.
41 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with VPP
42 | ... | link bonding (mode LACP, transmit policy l34) on link between DUT1 and
43 | ... | DUT2 and L2 cross- connect. Qemu VNFs are \
44 | ... | connected to VPP via vhost-user interfaces. Guest is running VPP l2xc \
45 | ... | interconnecting vhost-user interfaces, rxd/txd=1024. DUT1/DUT2 is \
46 | ... | tested with ${nic_name}.
47 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
48 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
49 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
50 | ... | of packets transmitted. NDR and PDR are discovered for different\
51 | ... | Ethernet L2 frame sizes using MLRsearch library.\
52 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
53 | ... | contains two L3 flow-groups (flow-group per direction, 254 flows per
54 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
55 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
56 | ... | addresses of the TG node interfaces.
57 | ... | *[Ref] Applicable standard specifications:* RFC2544.
58
59 *** Variables ***
60 | ${nic_name}= | Intel-X710
61 | ${overhead}= | ${4}
62 | ${subid}= | 10
63 | ${tag_rewrite}= | pop-1
64 | ${nf_dtcr}= | ${1}
65 | ${nf_dtc}= | ${1}
66 | ${nf_chains}= | ${1}
67 | ${nf_nodes}= | ${1}
68 # Link bonding config
69 | ${bond_mode}= | lacp
70 | ${lb_mode}= | l34
71 # Traffic profile:
72 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
73
74 *** Keywords ***
75 | Local Template
76 | | [Documentation]
77 | | ... | [Cfg] DUT runs L2XC switching config.
78 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
79 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
80 | | ...
81 | | ... | *Arguments:*
82 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
83 | | ... | Type: integer, string
84 | | ... | - phy_cores - Number of physical cores. Type: integer
85 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
86 | | ...
87 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
88 | | ...
89 | | Set Test Variable | \${frame_size}
90 | | ...
91 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
92 | | And Add PCI devices to all DUTs
93 | | And Add VLAN Strip Offload switch off between DUTs in 3-node double link topology
94 | | Set Max Rate And Jumbo And Handle Multi Seg
95 | | And Apply startup configuration on all VPP DUTs
96 | | When Initialize L2 xconnect with Vhost-User and VLAN with VPP link bonding in 3-node circular topology
97 | | ... | ${subid} | ${tag_rewrite} | ${bond_mode} | ${lb_mode}
98 | | And Configure chains of NFs connected via vhost-user
99 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | jumbo=${jumbo}
100 | | ... | use_tuned_cfs=${False} | auto_scale=${True} | vnf=vpp_chain_l2xc
101 | | Then Find NDR and PDR intervals using optimized search
102
103 *** Test Cases ***
104 | tc01-64B-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
105 | | [Tags] | 64B | 1C
106 | | frame_size=${64} | phy_cores=${1}
107
108 | tc02-64B-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
109 | | [Tags] | 64B | 2C
110 | | frame_size=${64} | phy_cores=${2}
111
112 | tc03-64B-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
113 | | [Tags] | 64B | 4C
114 | | frame_size=${64} | phy_cores=${4}
115
116 | tc04-1518B-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
117 | | [Tags] | 1518B | 1C
118 | | frame_size=${1518} | phy_cores=${1}
119
120 | tc05-1518B-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
121 | | [Tags] | 1518B | 2C
122 | | frame_size=${1518} | phy_cores=${2}
123
124 | tc06-1518B-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
125 | | [Tags] | 1518B | 4C
126 | | frame_size=${1518} | phy_cores=${4}
127
128 | tc07-9000B-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
129 | | [Tags] | 9000B | 1C
130 | | frame_size=${9000} | phy_cores=${1}
131
132 | tc08-9000B-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
133 | | [Tags] | 9000B | 2C
134 | | frame_size=${9000} | phy_cores=${2}
135
136 | tc09-9000B-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
137 | | [Tags] | 9000B | 4C
138 | | frame_size=${9000} | phy_cores=${4}
139
140 | tc10-IMIX-1c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
141 | | [Tags] | IMIX | 1C
142 | | frame_size=IMIX_v4_1 | phy_cores=${1}
143
144 | tc11-IMIX-2c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
145 | | [Tags] | IMIX | 2C
146 | | frame_size=IMIX_v4_1 | phy_cores=${2}
147
148 | tc12-IMIX-4c-2lbvpplacp-dot1q-l2xcbase-eth-2vhostvr1024-1vm-ndrpdr
149 | | [Tags] | IMIX | 4C
150 | | frame_size=IMIX_v4_1 | phy_cores=${4}