CSIT-1097: Migrate vm_vhost to NDRPDR and edit MRR
[csit.git] / tests / vpp / perf / vm_vhost / 10ge2p1x710-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Library | resources.libraries.python.QemuUtils
17 | ...
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
19 | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | VHOST | 1VM | VHOST_1024
20 | ...
21 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
22 | ... | L3 | Intel-X710
23 | Suite Teardown | Tear down 3-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd
27 | ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
28 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
29 | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
30 | ...
31 | Test Template | Local Template
32 | ...
33 | Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost*
34 | ...
35 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
36 | ... | with single links between nodes.
37 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
38 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4
39 | ... | routing and two static IPv4 /24 route entries. Qemu Guest is connected
40 | ... | to VPP via vhost-user interfaces. Guest is running DPDK testpmd
41 | ... | interconnecting vhost-user interfaces using 5 cores pinned to cpus 5-9
42 | ... | and 2048M memory. Testpmd is using socket-mem=1024M (512x2M hugepages),
43 | ... | 5 cores (1 main core and 4 cores dedicated for io), forwarding mode is
44 | ... | set to mac, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p10GE
45 | ... | NIC X710 by Intel.
46 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop
47 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop
48 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage
49 | ... | of packets transmitted. NDR and PDR are discovered for different
50 | ... | Ethernet L2 frame sizes using MLRsearch library.
51 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
52 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
53 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
54 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
55 | ... | addresses of the TG node interfaces.
56
57 *** Variables ***
58 | ${perf_qemu_qsz}= | 1024
59 # Socket names
60 | ${sock1}= | /tmp/sock-1
61 | ${sock2}= | /tmp/sock-2
62 # FIB tables
63 | ${fib_table_1}= | 100
64 | ${fib_table_2}= | 101
65 # X710 bandwidth limit
66 | ${s_limit}= | ${10000000000}
67 # Traffic profile:
68 | ${traffic_profile} | trex-sl-3n-ethip4-ip4src253
69
70 *** Keywords ***
71 | Local Template
72 | | [Documentation]
73 | | ... | [Cfg] DUT runs IPv4 routing config.
74 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
75 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
76 | | ...
77 | | ... | *Arguments:*
78 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
79 | | ... | Type: integer, string
80 | | ... | - phy_cores - Number of physical cores. Type: integer
81 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
82 | | ...
83 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
84 | | ...
85 | | Set Test Variable | ${framesize}
86 | | Set Test Variable | ${min_rate} | ${10000}
87 | | ${dut1_vm_refs}= | Create Dictionary
88 | | ${dut2_vm_refs}= | Create Dictionary
89 | | Set Test Variable | ${dut1_vm_refs}
90 | | Set Test Variable | ${dut2_vm_refs}
91 | | ...
92 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
93 | | And Add PCI devices to all DUTs
94 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
95 | | ... | ${s_limit} | ${framesize}
96 | | And Apply startup configuration on all VPP DUTs
97 | | When Initialize IPv4 forwarding with vhost in 3-node circular topology
98 | | ... | ${sock1} | ${sock2}
99 | | ${vm1}= | And Configure guest VM with dpdk-testpmd-mac connected via vhost-user
100 | | ... | ${dut1} | ${sock1} | ${sock2} | DUT1_VM1 | ${dut1_vif1_mac}
101 | | ... | ${dut1_vif2_mac} | jumbo_frames=${jumbo}
102 | | Set To Dictionary | ${dut1_vm_refs} | DUT1_VM1 | ${vm1}
103 | | ${vm2}= | And Configure guest VM with dpdk-testpmd-mac connected via vhost-user
104 | | ... | ${dut2} | ${sock1} | ${sock2} | DUT2_VM1 | ${dut2_vif1_mac}
105 | | ... | ${dut2_vif2_mac} | jumbo_frames=${jumbo}
106 | | Set To Dictionary | ${dut2_vm_refs} | DUT2_VM1 | ${vm2}
107 | | Then Find NDR and PDR intervals using optimized search
108 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
109
110 *** Test Cases ***
111 | tc01-64B-1c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
112 | | [Tags] | 64B | 1C
113 | | framesize=${64} | phy_cores=${1}
114
115 | tc02-64B-2c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
116 | | [Tags] | 64B | 2C
117 | | framesize=${64} | phy_cores=${2}
118
119 | tc03-64B-4c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
120 | | [Tags] | 64B | 4C
121 | | framesize=${64} | phy_cores=${4}
122
123 | tc04-1518B-1c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
124 | | [Tags] | 1518B | 1C
125 | | framesize=${1518} | phy_cores=${1}
126
127 | tc05-1518B-2c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
128 | | [Tags] | 1518B | 2C
129 | | framesize=${1518} | phy_cores=${2}
130
131 | tc06-1518B-4c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
132 | | [Tags] | 1518B | 4C
133 | | framesize=${1518} | phy_cores=${4}
134
135 | tc07-9000B-1c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
136 | | [Tags] | 9000B | 1C
137 | | framesize=${9000} | phy_cores=${1}
138
139 | tc08-9000B-2c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
140 | | [Tags] | 9000B | 2C
141 | | framesize=${9000} | phy_cores=${2}
142
143 | tc09-9000B-4c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
144 | | [Tags] | 9000B | 4C
145 | | framesize=${9000} | phy_cores=${4}
146
147 | tc10-IMIX-1c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
148 | | [Tags] | IMIX | 1C
149 | | framesize=IMIX_v4_1 | phy_cores=${1}
150
151 | tc11-IMIX-2c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
152 | | [Tags] | IMIX | 2C
153 | | framesize=IMIX_v4_1 | phy_cores=${2}
154
155 | tc12-IMIX-4c-ethip4-ip4base-eth-2vhostvr1024-1vm-ndrpdr
156 | | [Tags] | IMIX | 4C
157 | | framesize=IMIX_v4_1 | phy_cores=${4}