CSIT-1386 KernelVM - Part I
[csit.git] / tests / vpp / perf / vm_vhost / 2n-10ge2p1x710-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
18 | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM
19 | ... | VHOST_1024 | NF_DENSITY | NF_L3FWDIP4 | CHAIN | 4R2C
20 | ...
21 | Suite Setup | Set up 2-node performance topology with DUT's NIC model
22 | ... | L3 | Intel-X710
23 | Suite Teardown | Tear down 2-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | Test Teardown | Tear down performance mrr test with vhost and VM with dpdk-testpmd
27 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
28 | ...
29 | Test Template | Local Template
30 | ...
31 | Documentation | *Raw results L2BD test cases with 16 vhost 4 chains 8 VMs*
32 | ...
33 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
36 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-
37 | ... | domain and MAC learning enabled. Qemu VNFs are connected to VPP via
38 | ... | vhost-user interfaces. Guest is running DPDK l3fwd IPv4
39 | ... | interconnecting vhost-user interfaces, forwarding mode is
40 | ... | set to io, rxd/txd=1024. DUT1 is tested with 2p10GE NIC X710 by Intel.
41 | ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
42 | ... | at line rate and reports total received/sent packets over trial period.
43 | ... | Test packets are generated by TG on
44 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
45 | ... | (flow-group per direction, 254 flows per flow-group) with all packets
46 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
47 | ... | payload. MAC addresses are matching MAC addresses of NFs nodes
48 | ... | interfaces.
49 | ... | *[Ref] Applicable standard specifications:* RFC2544.
50
51 *** Variables ***
52 # X710 bandwidth limit
53 | ${s_limit}= | ${10000000000}
54 # Traffic profile:
55 | ${traffic_profile}= | trex-sl-2n3n-ethip4-ip4src254-4c2n
56
57 *** Keywords ***
58 | Local Template
59 | | [Documentation]
60 | | ... | [Cfg] DUT runs L2BD switching config.
61 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
62 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
63 | | ... | trial throughput test.
64 | | ...
65 | | ... | *Arguments:*
66 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
67 | | ... | Type: integer, string
68 | | ... | - phy_cores - Number of physical cores. Type: integer
69 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
70 | | ...
71 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
72 | | ...
73 | | ${dut1_vm_refs}= | Create Dictionary
74 | | Set Test Variable | ${dut1_vm_refs}
75 | | ...
76 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
77 | | And Add PCI devices to all DUTs
78 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
79 | | ... | ${s_limit} | ${framesize}
80 | | And Apply startup configuration on all VPP DUTs
81 | | When Initialize L2 bridge domains for multiple chains with Vhost-User
82 | | ... | nf_chains=${4} | nf_nodes=${2}
83 | | And Configure chains of NFs with dpdk-testpmd-mac connected via vhost-user
84 | | ... | nf_chains=${4} | nf_nodes=${2} | jumbo=${jumbo}
85 | | ... | perf_qemu_qsz=${1024} | use_tuned_cfs=${False}
86 | | Then Traffic should pass with maximum rate
87 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
88
89 *** Test Cases ***
90 | tc01-64B-1c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
91 | | [Tags] | 64B | 1C
92 | | framesize=${64} | phy_cores=${1}
93
94 | tc02-64B-2c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
95 | | [Tags] | 64B | 2C
96 | | framesize=${64} | phy_cores=${2}
97
98 | tc03-64B-4c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
99 | | [Tags] | 64B | 4C
100 | | framesize=${64} | phy_cores=${4}
101
102 | tc04-1518B-1c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
103 | | [Tags] | 1518B | 1C
104 | | framesize=${1518} | phy_cores=${1}
105
106 | tc05-1518B-2c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
107 | | [Tags] | 1518B | 2C
108 | | framesize=${1518} | phy_cores=${2}
109
110 | tc06-1518B-4c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
111 | | [Tags] | 1518B | 4C
112 | | framesize=${1518} | phy_cores=${4}
113
114 | tc07-9000B-1c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
115 | | [Tags] | 9000B | 1C
116 | | framesize=${9000} | phy_cores=${1}
117
118 | tc08-9000B-2c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
119 | | [Tags] | 9000B | 2C
120 | | framesize=${9000} | phy_cores=${2}
121
122 | tc09-9000B-4c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
123 | | [Tags] | 9000B | 4C
124 | | framesize=${9000} | phy_cores=${4}
125
126 | tc10-IMIX-1c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
127 | | [Tags] | IMIX | 1C
128 | | framesize=IMIX_v4_1 | phy_cores=${1}
129
130 | tc11-IMIX-2c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
131 | | [Tags] | IMIX | 2C
132 | | framesize=IMIX_v4_1 | phy_cores=${2}
133
134 | tc12-IMIX-4c-eth-l2bd-16vhost-4chain-8vm-l3fwdip4-mrr
135 | | [Tags] | IMIX | 4C
136 | | framesize=IMIX_v4_1 | phy_cores=${4}