adc27b84f5bfe27051ca90c5fe3f2249368f7e79
[csit.git] / tests / vpp / perf / vm_vhost / 2n1l-10ge2p1x710-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | DOT1Q | L2BDMACLRN | BASE | VHOST | 1VM
19 | ... | VHOST_1024
20 | ...
21 | Suite Setup | Set up 2-node performance topology with DUT's NIC model
22 | ... | L2 | Intel-X710
23 | Suite Teardown | Tear down 2-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd
27 | ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
28 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
29 | ...
30 | Test Template | Local Template
31 | ...
32 | Documentation | *RFC2544: Pkt throughput L2BD with vhost abd IEEE 802.1Q test
33 | ... | cases*
34 | ...
35 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with\
36 | ... | single links between nodes.
37 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. IEEE\
38 | ... | 802.1Q tagging is applied on link between DUT1-if2 and TG-if2.
39 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-domain and\
40 | ... | MAC learning enabled. Qemu Guest is connected to VPP via vhost-user\
41 | ... | interfaces. Guest is running DPDK testpmd interconnecting vhost-user\
42 | ... | interfaces, forwarding mode is set to io, rxd/txd=1024. DUT1 is tested\
43 | ... | with 2p10GE NIC X710 by Intel.
44 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
45 | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
46 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
47 | ... | of packets transmitted. NDR and PDR are discovered for different\
48 | ... | Ethernet L2 frame sizes using MLRsearch library. Test packets are\
49 | ... | generated by TG on links to DUTs. TG traffic profile contains two L3\
50 | ... | flow-groups (flow-group per direction, 254 flows per flow-group) with\
51 | ... | all packets containing Ethernet header, IPv4 header with IP protocol=61\
52 | ... | and static payload. MAC addresses are matching MAC addresses of the TG\
53 | ... | node interfaces.
54 | ... | *[Ref] Applicable standard specifications:* RFC2544.
55
56 *** Variables ***
57 | ${subid}= | 10
58 | ${tag_rewrite}= | pop-1
59 | ${overhead}= | ${4}
60 # Socket names
61 | ${bd_id1}= | 1
62 | ${bd_id2}= | 2
63 | ${sock1}= | /var/run/vpp/sock-1-${bd_id1}
64 | ${sock2}= | /var/run/vpp/sock-1-${bd_id2}
65 # X710 bandwidth limit
66 | ${s_limit}= | ${10000000000}
67 # Traffic profile:
68 | ${traffic_profile}= | trex-sl-2n-dot1qip4asym-ip4src254
69
70 *** Keywords ***
71 | Local Template
72 | | [Documentation]
73 | | ... | [Cfg] Each DUT runs L2BD switching with VLAN and uses ${phy_cores}\
74 | | ... | physical core(s) for worker threads.
75 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
76 | | ...
77 | | ... | *Arguments:*
78 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
79 | | ... | Type: integer, string
80 | | ... | - phy_cores - Number of physical cores. Type: integer
81 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
82 | | ...
83 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
84 | | ...
85 | | Set Test Variable | ${framesize}
86 | | Set Test Variable | ${min_rate} | ${10000}
87 | | ${dut1_vm_refs}= | Create Dictionary
88 | | Set Test Variable | ${dut1_vm_refs}
89 | | ...
90 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
91 | | And Add PCI devices to all DUTs
92 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
93 | | ... | ${s_limit} | ${framesize} | overhead=${overhead}
94 | | And Apply startup configuration on all VPP DUTs
95 | | When Initialize L2 bridge domains with Vhost-User and VLAN in circular topology
96 | | ... | ${bd_id1} | ${bd_id2} | ${sock1} | ${sock2} | ${subid}
97 | | ... | ${tag_rewrite}
98 | | And Configure guest VMs with dpdk-testpmd connected via vhost-user
99 | | ... | jumbo=${jumbo} | perf_qemu_qsz=${1024} | use_tuned_cfs=${False}
100 | | Then Find NDR and PDR intervals using optimized search
101 | | ... | ${framesize} | ${traffic_profile} | ${min_rate} | ${max_rate}
102
103 *** Test Cases ***
104 | tc01-64B-1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
105 | | [Tags] | 64B | 1C
106 | | framesize=${64} | phy_cores=${1}
107
108 | tc02-64B-2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
109 | | [Tags] | 64B | 2C
110 | | framesize=${64} | phy_cores=${2}
111
112 | tc03-64B-4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
113 | | [Tags] | 64B | 4C
114 | | framesize=${64} | phy_cores=${4}
115
116 | tc04-1518B-1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
117 | | [Tags] | 1518B | 1C
118 | | framesize=${1518} | phy_cores=${1}
119
120 | tc05-1518B-2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
121 | | [Tags] | 1518B | 2C
122 | | framesize=${1518} | phy_cores=${2}
123
124 | tc06-1518B-4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
125 | | [Tags] | 1518B | 4C
126 | | framesize=${1518} | phy_cores=${4}
127
128 | tc07-9000B-1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
129 | | [Tags] | 9000B | 1C
130 | | framesize=${9000} | phy_cores=${1}
131
132 | tc08-9000B-2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
133 | | [Tags] | 9000B | 2C
134 | | framesize=${9000} | phy_cores=${2}
135
136 | tc09-9000B-4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
137 | | [Tags] | 9000B | 4C
138 | | framesize=${9000} | phy_cores=${4}
139
140 | tc10-IMIX-1c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
141 | | [Tags] | IMIX | 1C
142 | | framesize=IMIX_v4_1 | phy_cores=${1}
143
144 | tc11-IMIX-2c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
145 | | [Tags] | IMIX | 2C
146 | | framesize=IMIX_v4_1 | phy_cores=${2}
147
148 | tc12-IMIX-4c-dot1q-l2bdbasemaclrn-eth-2vhostvr1024-1vm-ndrpdr
149 | | [Tags] | IMIX | 4C
150 | | framesize=IMIX_v4_1 | phy_cores=${4}