Simplify mrr daily tag expression
[csit.git] / tests / vpp / perf / vm_vhost / 2n1l-10ge2p1x710-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr.robot
1 # Copyright (c) 2019 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | ...
17 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDR
18 | ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | VHOST | 2VM | VHOST_1024
19 | ...
20 | Suite Setup | Set up 2-node performance topology with DUT's NIC model
21 | ... | L3 | ${nic_name}
22 | Suite Teardown | Tear down 2-node performance topology
23 | ...
24 | Test Setup | Set up performance test
25 | Test Teardown | Tear down performance test with vhost and VM with dpdk-testpmd
26 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
27 | ...
28 | Test Template | Local Template
29 | ...
30 | Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost*
31 | ...
32 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
33 | ... | with single links between nodes.
34 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing.
35 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4
36 | ... | routing and two static IPv4 /24 route entries. Qemu Guest is connected
37 | ... | to VPP via vhost-user interfaces. Guest is running DPDK testpmd
38 | ... | interconnecting vhost-user interfaces, forwarding mode is
39 | ... | set to mac, rxd/txd=1024. DUT1 is tested with ${nic_name}.\
40 | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
41 | ... | Rate) with zero packet loss tolerance and throughput PDR (Partial Drop\
42 | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
43 | ... | of packets transmitted. NDR and PDR are discovered for different\
44 | ... | Ethernet L2 frame sizes using MLRsearch library.\
45 | ... | Test packets are generated by TG on links to DUTs. TG traffic profile
46 | ... | contains two L3 flow-groups (flow-group per direction, 253 flows per
47 | ... | flow-group) with all packets containing Ethernet header, IPv4 header
48 | ... | with IP protocol=61 and static payload. MAC addresses are matching MAC
49 | ... | addresses of the TG node interfaces.
50
51 *** Variables ***
52 | ${nic_name}= | Intel-X710
53 | ${overhead}= | ${0}
54 # Traffic profile:
55 | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src253
56
57 *** Keywords ***
58 | Local Template
59 | | [Documentation]
60 | | ... | [Cfg] DUT runs IPv4 routing config.
61 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
62 | | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
63 | | ...
64 | | ... | *Arguments:*
65 | | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
66 | | ... | Type: integer, string
67 | | ... | - phy_cores - Number of physical cores. Type: integer
68 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
69 | | ...
70 | | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
71 | | ...
72 | | Set Test Variable | \${frame_size}
73 | | ...
74 | | ${dut1_vm_refs}= | Create Dictionary
75 | | Set Test Variable | ${dut1_vm_refs}
76 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
77 | | And Add PCI devices to all DUTs
78 | | Set Max Rate And Jumbo And Handle Multi Seg
79 | | And Apply startup configuration on all VPP DUTs
80 | | When Initialize IPv4 forwarding with vhost in 2-node circular topology
81 | | ... | vm_count=${2}
82 | | And Configure guest VMs with dpdk-testpmd-mac connected via vhost-user
83 | | ... | vm_count=${2} | jumbo=${jumbo} | perf_qemu_qsz=${1024}
84 | | ... | use_tuned_cfs=${False}
85 | | Then Find NDR and PDR intervals using optimized search
86
87 *** Test Cases ***
88 | tc01-64B-1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
89 | | [Tags] | 64B | 1C
90 | | frame_size=${64} | phy_cores=${1}
91
92 | tc02-64B-2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
93 | | [Tags] | 64B | 2C
94 | | frame_size=${64} | phy_cores=${2}
95
96 | tc03-64B-4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
97 | | [Tags] | 64B | 4C
98 | | frame_size=${64} | phy_cores=${4}
99
100 | tc04-1518B-1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
101 | | [Tags] | 1518B | 1C
102 | | frame_size=${1518} | phy_cores=${1}
103
104 | tc05-1518B-2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
105 | | [Tags] | 1518B | 2C
106 | | frame_size=${1518} | phy_cores=${2}
107
108 | tc06-1518B-4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
109 | | [Tags] | 1518B | 4C
110 | | frame_size=${1518} | phy_cores=${4}
111
112 | tc07-9000B-1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
113 | | [Tags] | 9000B | 1C
114 | | frame_size=${9000} | phy_cores=${1}
115
116 | tc08-9000B-2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
117 | | [Tags] | 9000B | 2C
118 | | frame_size=${9000} | phy_cores=${2}
119
120 | tc09-9000B-4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
121 | | [Tags] | 9000B | 4C
122 | | frame_size=${9000} | phy_cores=${4}
123
124 | tc10-IMIX-1c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
125 | | [Tags] | IMIX | 1C
126 | | frame_size=IMIX_v4_1 | phy_cores=${1}
127
128 | tc11-IMIX-2c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
129 | | [Tags] | IMIX | 2C
130 | | frame_size=IMIX_v4_1 | phy_cores=${2}
131
132 | tc12-IMIX-4c-ethip4-ip4base-eth-4vhostvr1024-2vm-ndrpdr
133 | | [Tags] | IMIX | 4C
134 | | frame_size=IMIX_v4_1 | phy_cores=${4}