CSIT-1390 Implement multichain configuration for l2bd with vhost/l3fwd.
[csit.git] / tests / vpp / perf / vm_vhost / 2n1l-25ge2p1xxv710-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Library | resources.libraries.python.QemuUtils
17 | ...
18 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
19 | ... | NIC_Intel-XXV710 | ETH | L2BDMACLRN | BASE | VHOST | VM | VHOST_1024
20 | ...
21 | Suite Setup | Set up 2-node performance topology with DUT's NIC model
22 | ... | L2 | Intel-XXV710
23 | Suite Teardown | Tear down 2-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | Test Teardown | Tear down performance mrr test with vhost and VM with dpdk-testpmd
27 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
28 | ...
29 | Test Template | Local Template
30 | ...
31 | Documentation | *Raw results L2BD test cases with vhost*
32 | ...
33 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology
34 | ... | with single links between nodes.
35 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
36 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge-
37 | ... | domain and MAC learning enabled. Qemu Guest is connected to VPP via
38 | ... | vhost-user interfaces. Guest is running DPDK testpmd
39 | ... | interconnecting vhost-user interfaces, forwarding mode is
40 | ... | set to io, rxd/txd=256. DUT1 is tested with 2p25GE NIC XXV710 by Intel.
41 | ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
42 | ... | at line rate and reports total received/sent packets over trial period.
43 | ... | Test packets are generated by TG on
44 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
45 | ... | (flow-group per direction, 254 flows per flow-group) with all packets
46 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
47 | ... | payload. MAC addresses are matching MAC addresses of the TG node
48 | ... | interfaces.
49 | ... | *[Ref] Applicable standard specifications:* RFC2544.
50
51 *** Variables ***
52 # XXV710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
53 | ${s_24.5G}= | ${24500000000}
54 # XXV710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
55 | ${s_18.75Mpps}= | ${18750000}
56 # Traffic profile:
57 | ${traffic_profile}= | trex-sl-2n-ethip4-ip4src254
58
59 *** Keywords ***
60 | Local Template
61 | | [Documentation]
62 | | ... | [Cfg] DUT runs L2BD switching config.
63 | | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
64 | | ... | [Ver] Measure MaxReceivedRate for ${framesize}B frames using single\
65 | | ... | trial throughput test.
66 | | ...
67 | | ... | *Arguments:*
68 | | ... | - framesize - Framesize in Bytes in integer or string (IMIX_v4_1).
69 | | ... | Type: integer, string
70 | | ... | - phy_cores - Number of physical cores. Type: integer
71 | | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
72 | | ...
73 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
74 | | ...
75 | | ${dut1_vm_refs}= | Create Dictionary
76 | | Set Test Variable | ${dut1_vm_refs}
77 | | ...
78 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
79 | | And Add PCI devices to all DUTs
80 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
81 | | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
82 | | And Apply startup configuration on all VPP DUTs
83 | | When Initialize L2 bridge domains with Vhost-User | nf_nodes=${1}
84 | | And Configure guest VMs with dpdk-testpmd connected via vhost-user
85 | | ... | vm_count=${1} | jumbo=${jumbo} | perf_qemu_qsz=${1024}
86 | | ... | use_tuned_cfs=${False}
87 | | Then Traffic should pass with maximum rate
88 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
89
90 *** Test Cases ***
91 | tc01-64B-1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
92 | | [Tags] | 64B | 1C
93 | | framesize=${64} | phy_cores=${1}
94
95 | tc02-64B-2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
96 | | [Tags] | 64B | 2C
97 | | framesize=${64} | phy_cores=${2}
98
99 | tc03-64B-4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
100 | | [Tags] | 64B | 4C
101 | | framesize=${64} | phy_cores=${4}
102
103 | tc04-1518B-1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
104 | | [Tags] | 1518B | 1C
105 | | framesize=${1518} | phy_cores=${1}
106
107 | tc05-1518B-2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
108 | | [Tags] | 1518B | 2C
109 | | framesize=${1518} | phy_cores=${2}
110
111 | tc06-1518B-4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
112 | | [Tags] | 1518B | 4C
113 | | framesize=${1518} | phy_cores=${4}
114
115 | tc07-9000B-1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
116 | | [Tags] | 9000B | 1C
117 | | framesize=${9000} | phy_cores=${1}
118
119 | tc08-9000B-2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
120 | | [Tags] | 9000B | 2C
121 | | framesize=${9000} | phy_cores=${2}
122
123 | tc09-9000B-4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
124 | | [Tags] | 9000B | 4C
125 | | framesize=${9000} | phy_cores=${4}
126
127 | tc10-IMIX-1c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
128 | | [Tags] | IMIX | 1C
129 | | framesize=IMIX_v4_1 | phy_cores=${1}
130
131 | tc11-IMIX-2c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
132 | | [Tags] | IMIX | 2C
133 | | framesize=IMIX_v4_1 | phy_cores=${2}
134
135 | tc12-IMIX-4c-eth-l2bdbasemaclrn-eth-2vhostvr1024-1vm-mrr
136 | | [Tags] | IMIX | 4C
137 | | framesize=IMIX_v4_1 | phy_cores=${4}