CSIT-1097: Migrate vm_vhost to NDRPDR and edit MRR
[csit.git] / tests / vpp / perf / vm_vhost / 40ge2p1xl710-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr.robot
1 # Copyright (c) 2018 Cisco and/or its affiliates.
2 # Licensed under the Apache License, Version 2.0 (the "License");
3 # you may not use this file except in compliance with the License.
4 # You may obtain a copy of the License at:
5 #
6 #     http://www.apache.org/licenses/LICENSE-2.0
7 #
8 # Unless required by applicable law or agreed to in writing, software
9 # distributed under the License is distributed on an "AS IS" BASIS,
10 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
11 # See the License for the specific language governing permissions and
12 # limitations under the License.
13
14 *** Settings ***
15 | Resource | resources/libraries/robot/performance/performance_setup.robot
16 | Library | resources.libraries.python.QemuUtils
17 | ...
18 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | MRR
19 | ... | NIC_Intel-XL710 | ETH | L2XCFWD | BASE | VHOST | VM | VHOST_1024
20 | ...
21 | Suite Setup | Set up 3-node performance topology with DUT's NIC model
22 | ... | L2 | Intel-XL710
23 | Suite Teardown | Tear down 3-node performance topology
24 | ...
25 | Test Setup | Set up performance test
26 | Test Teardown | Tear down performance mrr test with vhost and VM with dpdk-testpmd
27 | ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs}
28 | ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs}
29 | ...
30 | Test Template | Local Template
31 | ...
32 | Documentation | *Raw results L2XC test cases with vhost*
33 | ...
34 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
35 | ... | with single links between nodes.
36 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
37 | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross-
38 | ... | connects. Qemu Guests are connected to VPP via vhost-user interfaces.
39 | ... | Guests are running DPDK testpmd interconnecting vhost-user interfaces
40 | ... | using 5 cores pinned to cpus on NUMA1 (cpus 24-28 and 29-34) and 2048M
41 | ... | memory. Testpmd is using socket-mem=1024M (512x2M hugepages), 5 cores
42 | ... | (1 main core and 4 cores dedicated for io), forwarding mode is set to
43 | ... | io, rxd/txd=1024, burst=64. DUT1, DUT2 are tested with 2p40GE NIC XL710
44 | ... | by Intel.
45 | ... | *[Ver] TG verification:* In MaxReceivedRate test TG sends traffic
46 | ... | at line rate and reports total received/sent packets over trial period.
47 | ... | Test packets are generated by TG on
48 | ... | links to DUTs. TG traffic profile contains two L3 flow-groups
49 | ... | (flow-group per direction, 253 flows per flow-group) with all packets
50 | ... | containing Ethernet header, IPv4 header with IP protocol=61 and static
51 | ... | payload. MAC addresses are matching MAC addresses of the TG node
52 | ... | interfaces.
53 | ... | *[Ref] Applicable standard specifications:* RFC2544.
54
55 *** Variables ***
56 | ${perf_qemu_qsz}= | 1024
57 # XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps
58 | ${s_24.5G}= | ${24500000000}
59 # XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps
60 | ${s_18.75Mpps}= | ${18750000}
61 # CPU settings
62 | ${system_cpus}= | ${1}
63 | ${vpp_cpus}= | ${5}
64 | ${vm_cpus}= | ${5}
65 # Traffic profile:
66 | ${traffic_profile}= | trex-sl-3n-ethip4-ip4src254
67
68 *** Keywords ***
69 | Local Template
70 | | [Documentation] | FIXME.
71 | | [Arguments] | ${framesize} | ${phy_cores} | ${rxq}=${None}
72 | | ...
73 | | Set Test Variable | ${framesize}
74 | | Set Test Variable | ${min_rate} | ${10000}
75 | | ${dut1_vm_refs}= | Create Dictionary
76 | | ${dut2_vm_refs}= | Create Dictionary
77 | | Set Test Variable | ${dut1_vm_refs}
78 | | Set Test Variable | ${dut2_vm_refs}
79 | | ...
80 | | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
81 | | And Add PCI devices to all DUTs
82 | | ${max_rate} | ${jumbo} = | Get Max Rate And Jumbo And Handle Multi Seg
83 | | ... | ${s_24.5G} | ${framesize} | pps_limit=${s_18.75Mpps}
84 | | And Apply startup configuration on all VPP DUTs
85 | | When Initialize L2 xconnect with Vhost-User for '2' in 3-node circular topology
86 | | Set Test Variable | \${jumbo_frames} | ${jumbo}
87 | | And Configure '2' guest VMs with dpdk-testpmd connected via vhost-user in 3-node circular topology
88 | | Then Traffic should pass with maximum rate
89 | | ... | ${max_rate}pps | ${framesize} | ${traffic_profile}
90
91 *** Test Cases ***
92 | tc01-64B-1c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
93 | | [Tags] | 64B | 1C
94 | | framesize=${64} | phy_cores=${1}
95
96 | tc02-64B-2c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
97 | | [Tags] | 64B | 2C
98 | | framesize=${64} | phy_cores=${2}
99
100 | tc03-64B-4c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
101 | | [Tags] | 64B | 4C
102 | | framesize=${64} | phy_cores=${4}
103
104 | tc04-1518B-1c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
105 | | [Tags] | 1518B | 1C
106 | | framesize=${1518} | phy_cores=${1}
107
108 | tc05-1518B-2c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
109 | | [Tags] | 1518B | 2C
110 | | framesize=${1518} | phy_cores=${2}
111
112 | tc06-1518B-4c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
113 | | [Tags] | 1518B | 4C
114 | | framesize=${1518} | phy_cores=${4}
115
116 | tc07-9000B-1c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
117 | | [Tags] | 9000B | 1C
118 | | framesize=${9000} | phy_cores=${1}
119
120 | tc08-9000B-2c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
121 | | [Tags] | 9000B | 2C
122 | | framesize=${9000} | phy_cores=${2}
123
124 | tc09-9000B-4c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
125 | | [Tags] | 9000B | 4C
126 | | framesize=${9000} | phy_cores=${4}
127
128 | tc10-IMIX-1c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
129 | | [Tags] | IMIX | 1C
130 | | framesize=IMIX_v4_1 | phy_cores=${1}
131
132 | tc11-IMIX-2c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
133 | | [Tags] | IMIX | 2C
134 | | framesize=IMIX_v4_1 | phy_cores=${2}
135
136 | tc12-IMIX-4c-eth-l2xcbase-eth-4vhostvr1024-2vm-mrr
137 | | [Tags] | IMIX | 4C
138 | | framesize=IMIX_v4_1 | phy_cores=${4}