.. Copyright (c) 2019 Cisco and/or its affiliates. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at: .. http://www.apache.org/licenses/LICENSE-2.0 .. Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. AUTOMATING VPP-API FLAG DAY IN CSIT =================================== **ABSTRACT** This document is intended to provide a solution to the problem of automating the detection of VPP API changes which are not backwards compatible with existing CSIT tests and to automate the "Flag Day" process of deploying a new set of CSIT tests which are compatible with the new version of the VPP API without causing a halt to the normal VPP/CSIT operational CI process. This shall initially be limited to changes in \*.api files contained in the vpp repo. Eventually the detection algorithm could be extended to include other integration points such as "directory" structure of stats segment or PAPI python library dependencies. **VPP API FLAG DAY ALGORITHM USE CASE** The following steps describe the use case of the proposed implementation for automating the VPP API "Flag Day" algorithm: #. A VPP patch with VPP API changes is submitted to gerrit for review #. CSIT verify job detects the VPP API change(s). Note: This requires a new CSIT test described below in the section "CSIT VPP API CHANGE DETECTION TEST". #. CSIT verify job fails before starting to run any tests and an email with the appropriate reason is sent to the VPP patch submitter and vpp-api-dev@lists.fd.io including the VPP patch information and API change(s) that were detected. #. The VPP patch developer and CSIT team create a CSIT JIRA ticket to identify the work required to support the new VPP API version. #. CSIT developer creates a patch to existing CSIT tests to support the new VPP API version and new features in the VPP patch as required. #. CSIT developer runs CI verification tests for the CSIT patch against the VPP patch (aka "Patch-On-Patch verification). This process verifies support for the new VPP API, associated VPP features and CSIT tests. Both developers iterate until the verification passes. #. CSIT committer updates the supported API signature(s) such that all signatures included in the CSIT branch are supported by the current version of the CSIT tests. See "API FLAG DAY SCENERIOS" below for examples. #. CSIT committer merges CSIT patch and creates a new operational branch in the CSIT repo. #. VPP developer issues a recheck on the VPP patch and a VPP Committer merges the patch. #. Recheck of existing VPP patches in gerrit may cause the "VPP API Incompatible Change Test" to send an email to the patch submitter to rebase the patch to pick up the compatible VPP API version files. **FEATURES REQUIRED FOR IMPLEMENTATION** **VPP API SIGNATURE GENERATION** The VPP PAPI generation already produces the complete set of signatures in JSON format for all api files and includes them in the vpp-api-python.deb package. Upon installation all of the \*.api.json files are installed in the /usr/share/vpp/api directory. Each record in the .api.json file contains the name of the api message, the fields and their data types, and a CRC of the json object. **VPP API CLIENT SIGNATURES** In each CSIT branch, all of the VPP API client signatures that are supported by the CSIT tests in that branch are contained in separate directories under the .../csit/resources/api/vpp directory. The CSIT VPP API client signature directory structure is the same as the one published in /usr/share/vpp/api as generated by vppapigen. The granularity of the CSIT VPP API client signature support will initially be on a per VPP API JSON file. In the future, a per VPP api message level of granularity may be added. If CSIT is capable of supporting more than one version of a VPP API JSON file, then a new CSIT VPP api client signature directory will be created containing all of the supported VPP API JSON files. Typically this will be identical to the previous version with the exception of the VPP API JSON files which have been changed in the VPP patch which triggered the VPP API FLAG day algorithm. See https://gerrit.fd.io/r/19027 for the baseline implementation. **VPP API CHANGES FILE INCLUDED in VPP PACKAGE** The VPP build system shall add a file in the /usr/share/vpp/api directory of the vpp package which is the same directory in which the api JSON files are published. This file will include the list of VPP api files which were included in the patch to be verified. See https://gerrit.fd.io/r/19479 for the baseline implementation. **CSIT VPP API CHANGE DETECTION TEST** The set of VPP api signatures which are supported by the CSIT tests in a given CSIT branch shall be stored in .../csit/resources/api/vpp which mirrors the same directory structure as the API signature directory generated by vppapigen (e.g. /usr/share/api/vpp/core & /usr/share/api/vpp/plugins). The test compares the VPP patch's API signature directory with each of the CSIT VPP API signabture directory and determine the following state: - No Change - Changed - Rebase or Merge Parent VPP Patch [0] [0] The Rebase or Merge Parent VPP Patch result occurs when there is no valid API signature found in .../csit/resources/api/vpp AND there are no VPP API changes included in the patch. This could be the result of a patch whose parent does not include the API changes merged in another VPP patch and supported by the new CSIT oper branch. This case would be resolved by rebasing the patch to HEAD. The other possibility is that the patch is a descendent of a patch with an incompatible API change that has not been merged yet. This case is resolved by completing the API Flag Day algorithm on the parent patch such that the latest CSIT oper branch supports the API in the parent. This importance of the detection of this state is to provide direct feedback to the VPP patch author about how to resolve the issue in a timely manner. Any condition other than "No Change" shall cause an email to be sent to the VPP patch submitter. If the condition is "Changed" then vpp-api-dev@lists.fd.io shall also be copied on the notification email. **RUN CSIT VERIFY JOB AGAINST A SPECIFIC VPP PATCH IN GERRIT REVIEW BRANCH** This is the "Patch-On-Patch" methodology documented in [TBD]? **VPP API FLAG DAY SCENARIOS** In the beginning, let's assume there is a single VPP API Client signature directory in the current oper branch called vpp-api-client.sig.1 which contains core/vpe.api.json and plugin/acl.api.json which are supported by the CSIT tests. **VPP PATCH CONTAINS INCOMPATIBLE API CHANGES** Next, a VPP developer modifies vpe.api with a whole set of new type definitions. When the patch is submitted to gerrit.fd.io, the "CSIT VPP API CHANGE DETECTION TEST" detects the changed api file and votes Verified -1. Once CSIT has been updated to support the new type definitions and verified against the VPP patch, vpp-api-client.sig.1/core/vpe.api.json is replaced with the vpe.api.json file from the patch. The CSIT changes are committed into CSIT master and a new oper branch is created. The VPP patch is then rechecked and merged into VPP master as soon as practicable. All existing VPP patches and any new patches not including the VPP api change patch will fail verification with a "Rebase or Merge Parent" notification upon recheck or initial submission to gerrit. Rebasing is then required in order to pass verification of the new api changes. **VPP PATCH CONTAINS BACKWARDS COMPATIBLE CHANGES** The next day, a VPP developer finds a need to add a new attribute to an api message in vpe.api with a default value defined. This is a backwards compatible change for CSIT. Since the "CSIT VPP API CHANGE DETECTION TEST" only works on a per api file level of granularity, the change is flagged with Verified -1. However, in this case, the CSIT developer can resolve the verify failure by adding a second VPP API client signature directory, vpp-api-client.sig.2 which is a copy of vpp-api-client.sig.1 with the vpe.api.json file updated with the contents of the copy from the VPP patch. After the CSIT changes are merged and a new CSIT oper branch is created, the VPP patch will pass verification upon recheck. All other patches will continue to pass verification upon recheck or initial submission to gerrit by matching the signature in vpp-api-client.sig.1 -- life is good. **CSIT REMOVES SUPPORT FOR A VPP API VERSION** Since it is not desirable to maintain a bazillion CSIT VPP API client signatures, after a reasonable period of time (let's say a week), a CSIT developer deletes vpp-api-client.sig.1 and renames vpp-api-client.sig.2 to vpp-api-client.sig.1, merges to CSIT master, and creates a new oper branch. At this point, VPP patches that do not contain the new vpe.api file will fail verification upon recheck or initial submission to gerrit with a "Rebase or Merge Parent" notification and will require rebasing to pass verification. **CSIT ADDS SUPPORT FOR A NEW FEATURE API PRIOR TO VPP** A VPP developer has lots of ideas and decides to add a new plugin and api which supports the "Super-Duper Feature" to VPP in a new plugin called the "Super-Duper Plugin" and associated super_duper.api VPP binary APi message definition file. Being a thoughtful and helpful developer, the VPP developer notifies the CSIT team providing them with the super_duper.api.json file. A CSIT developer quickly produces the Super-Duper Feature CSIT test suite and updates the VPP API Client signature with vpe-api-client.sig.1/plugin/super_duper.api.json. In the meantime, the VPP developer pushes the Super-Duper VPP patch which fails the CSIT VPP API CHANGE DETECTION TEST. Both developers then work together to verify both CSIT and the VPP patch. The CSIT developer then merges the CSIT code into master and creates a new oper branch. Our VPP developer is very pleased when the VPP patch containing the Super-Duper Plugin verifies upon recheck. All other VPP patches without api file changes continue to pass the CSIT VPP API CHANGE DETECTION TEST before and after the Super-Duper VPP patch is merged. **VPP PATCH CONTAINS A NEW FEATURE API BEFORE CSIT SUPPORT** Now let's assume that the VPP developer was having a bad day and forgot to notify the CSIT team about the new Super-Duper Plugin. Upon pushing the VPP patch to gerrit, the VPP developer is pleased that there is no nastygram email from the CSIT VPP API CHANGE DETECTION TEST. All VPP patches without api file changes continue to pass the CSIT VPP API CHANGE DETECTION TEST. Eventually a Super-Duper Plugin test suite is added to CSIT along with vpe-api-client.sig.1/plugin/super_duper.api.json and release in a new CSIT oper branch. All VPP patches that are do not contain api changes and are verified via recheck or initial submission, continue to pass the CSIT VPP API CHANGE DETECTION TEST.