Release Notes ============= Changes in |csit-release| ------------------------- #. VPP PERFORMANCE TESTS - CSIT test environment is versioned, see :ref:`test_environment_versioning`. - To identify performance changes due to VPP code changes from v20.05.0 to v20.09.0, both have been tested in CSIT environment ver. 5 and compared against each other. All substantial progressions has been marked up with RCA analysis. See :ref:`vpp_compare_current_vs_previous_release` and :ref:`vpp_known_issues`. - **NAT44 tests**: Adapted existing and added new tests. - Refactored NAT44 deterministic mode (nat44det) tests to use separate det44 vpp plugin and to use the same scheme of inside and outside addresses and ports, as used in new NAT44 endpoint-dependent mode tests. - Added new NAT44 endpoint-depended mode uni-directional (nat44ed-udir) tests that measure packet throughput in one direction with usage of TRex in stateless mode. - Added new NAT44 endpoint-dependent mode CPS tests that measure connections per second with usage of TRex in stateful mode. See updated methodology sections for more details. - Added new NAT44 endpoint-dependent mode PPS tests that measure packets per second (protocol and data together) with usage of TRex in stateful mode. See updated methodology sections for more details. - **IPSec async mode tests**: Added VPP performance tests for async crypto engine. - **AMD 2n-zn2 testbed**: New physical testbed type installed in FD.io CSIT, VPP performance data will be added in upcoming weeks. #. TEST FRAMEWORK - **TRex ASTF**: Added capability to run TRex in advanced stateful mode. - **CSIT PAPI support**: Due to issues with PAPI performance, VAT is still used in CSIT for all VPP scale tests. See known issues below. - **General Code Housekeeping**: Ongoing RF keywords optimizations, removal of redundant RF keywords and aligning of suite/test setup/teardowns. - **Intel E810CQ 100G NIC**: Added configuration for Intel E810CQ 100G NIC. No tests run for this NIC as it is not present in FD.io CSIT lab yet. #. PRESENTATION AND ANALYTICS LAYER - **Graphs improvements**: Added possibility to use Gbps on Y-axis in Packet Throughput and Speedup Multi-Core graphs, added unidirectional mode to the Latency graphs. .. raw:: latex \clearpage .. _vpp_known_issues: Known Issues ------------ List of known issues in |csit-release| for VPP performance tests: +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ | # | JiraID | Issue Description | +====+=========================================+===========================================================================================================+ | 1 | `CSIT-570 | Sporadic (1 in 200) NDR discovery test failures on x520. DPDK reporting rx-errors, indicating L1 issue. | | | `_ | Suspected issue with HW combination of X710-X520 in LF testbeds. Not observed outside of LF testbeds. | +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ | 2 | `VPP-662 | 9000B packets not supported by NICs VIC1227 and VIC1387. | | | `_ | | +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ | 3 | `CSIT-1763 | Adapt ramp-up phase of nat44 tests for different frame sizes. | | | `_ | Currently ramp-up phase rate and duration values are correctly set for tests with 64B frame size. | +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ | 4 | `CSIT-1671 | All CSIT scale tests can not use PAPI due to much slower performance compared to VAT/CLI (it takes much | | | `_ | longer to program VPP). This needs to be addressed on the PAPI side. | | +-----------------------------------------+ The usual PAPI library spends too much time parsing arguments, so even with async processing (hundreds of | | | `VPP-1763 | commands in flight over socket), the VPP configuration for large scale tests (millions of messages) takes | | | `_ | too long. | +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ | 5 | `CSIT-1771 | IPv4 IPSEC 9000B packet tests had been failing when chained buffers were not supported. | | | `_ | This has been fixed on VPP side, but CSIT still needs to re-enable jumbo tests. | +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ | 6 | `VPP-1934 | [i40e] Interfaces are not brought up from carrier-down. | | | `_ | In case of i40e -based interface (e.g Intel x700 series NIC) is bound to kernel driver (i40e) and is in | | | | state "no-carrier" () because previously it was disabled via | | | | "I40E_AQ_PHY_LINK_ENABLED" call, then VPP during initialization of AVF interface is not re-enabling | | | | interface link via i40e driver to up. | | | | CSIT implemented `workaround for AVF interface `_ until fixed. | +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ | 7 | `CSIT-1760 | All Mellanox / rdma driver tests are failing on LF testbed28 while successfully run on other LF testbeds. | | | `_ | | +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ Root Cause Analysis for Performance Changes ------------------------------------------- List of RCAs in |csit-release| for VPP performance changes: +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+ | # | JiraID | Issue Description | +====+=========================================+===========================================================================================================+ | 1 | | | | | | | +----+-----------------------------------------+-----------------------------------------------------------------------------------------------------------+