job "${job_name}" { # The "region" parameter specifies the region in which to execute the job. # If omitted, this inherits the default region name of "global". # region = "global" # # The "datacenters" parameter specifies the list of datacenters which should # be considered when placing this task. This must be provided. datacenters = "${datacenters}" # The "type" parameter controls the type of job, which impacts the scheduler's # decision on placement. This configuration is optional and defaults to # "service". For a full list of job types and their differences, please see # the online documentation. # # For more information, please see the online documentation at: # # https://www.nomadproject.io/docs/jobspec/schedulers # type = "service" update { # The "max_parallel" parameter specifies the maximum number of updates to # perform in parallel. In this case, this specifies to update a single task # at a time. max_parallel = 1 health_check = "checks" # The "min_healthy_time" parameter specifies the minimum time the allocation # must be in the healthy state before it is marked as healthy and unblocks # further allocations from being updated. min_healthy_time = "10s" # The "healthy_deadline" parameter specifies the deadline in which the # allocation must be marked as healthy after which the allocation is # automatically transitioned to unhealthy. Transitioning to unhealthy will # fail the deployment and potentially roll back the job if "auto_revert" is # set to true. healthy_deadline = "3m" # The "progress_deadline" parameter specifies the deadline in which an # allocation must be marked as healthy. The deadline begins when the first # allocation for the deployment is created and is reset whenever an allocation # as part of the deployment transitions to a healthy state. If no allocation # transitions to the healthy state before the progress deadline, the # deployment is marked as failed. progress_deadline = "10m" %{ if use_canary } # The "canary" parameter specifies that changes to the job that would result # in destructive updates should create the specified number of canaries # without stopping any previous allocations. Once the operator determines the # canaries are healthy, they can be promoted which unblocks a rolling update # of the remaining allocations at a rate of "max_parallel". # # Further, setting "canary" equal to the count of the task group allows # blue/green deployments. When the job is updated, a full set of the new # version is deployed and upon promotion the old version is stopped. canary = 1 # Specifies if the job should auto-promote to the canary version when all # canaries become healthy during a deployment. Defaults to false which means # canaries must be manually updated with the nomad deployment promote # command. auto_promote = true # The "auto_revert" parameter specifies if the job should auto-revert to the # last stable job on deployment failure. A job is marked as stable if all the # allocations as part of its deployment were marked healthy. auto_revert = true %{ endif } } # The reschedule stanza specifies the group's rescheduling strategy. If # specified at the job level, the configuration will apply to all groups # within the job. If the reschedule stanza is present on both the job and the # group, they are merged with the group stanza taking the highest precedence # and then the job. reschedule { delay = "30s" delay_function = "constant" unlimited = true } # The "group" stanza defines a series of tasks that should be co-located on # the same Nomad client. Any task within a group will be placed on the same # client. # # For more information and examples on the "group" stanza, please see # the online documentation at: # # https://www.nomadproject.io/docs/job-specification/group # group "prod-group1-${service_name}" { # The "count" parameter specifies the number of the task groups that should # be running under this group. This value must be non-negative and defaults # to 1. count = ${group_count} # The restart stanza configures a tasks's behavior on task failure. Restarts # happen on the client that is running the task. # # https://www.nomadproject.io/docs/job-specification/restart # restart { interval = "30m" attempts = 40 delay = "15s" mode = "delay" } # The constraint allows restricting the set of eligible nodes. Constraints # may filter on attributes or client metadata. # # For more information and examples on the "volume" stanza, please see # the online documentation at: # # https://www.nomadproject.io/docs/job-specification/constraint # constraint { attribute = "$${attr.cpu.arch}" operator = "!=" value = "arm64" } constraint { attribute = "$${node.class}" value = "builder" } # The "task" stanza creates an individual unit of work, such as a Docker # container, web application, or batch processing. # # For more information and examples on the "task" stanza, please see # the online documentation at: # # https://www.nomadproject.io/docs/job-specification/task # task "prod-task1-${service_name}" { # The "driver" parameter specifies the task driver that should be used to # run the task. driver = "exec" %{ if use_vault_provider } vault { policies = "${vault_kv_policy_name}" } %{ endif } # The "config" stanza specifies the driver configuration, which is passed # directly to the driver to start the task. The details of configurations # are specific to each driver, so please see specific driver # documentation for more information. config { command = "local/alertmanager-${version}.linux-amd64/alertmanager" args = [ "--config.file=secrets/alertmanager.yml" ] } # The artifact stanza instructs Nomad to fetch and unpack a remote resource, # such as a file, tarball, or binary. Nomad downloads artifacts using the # popular go-getter library, which permits downloading artifacts from a # variety of locations using a URL as the input source. # # For more information and examples on the "artifact" stanza, please see # the online documentation at: # # https://www.nomadproject.io/docs/job-specification/artifact # artifact { source = "${url}" } # The "template" stanza instructs Nomad to manage a template, such as # a configuration file or script. This template can optionally pull data # from Consul or Vault to populate runtime configuration data. # # For more information and examples on the "template" stanza, please see # the online documentation at: # # https://www.nomadproject.io/docs/job-specification/template # template { change_mode = "noop" change_signal = "SIGINT" destination = "secrets/alertmanager.yml" left_delimiter = "{{{" right_delimiter = "}}}" data = < ] # # # Certificate and key files for client cert authentication to the server. # cert_file: # key_file: # # # ServerName extension to indicate the name of the server. # # http://tools.ietf.org/html/rfc4366#section-3.1 # server_name: # # # Disable validation of the server certificate. # insecure_skip_verify: true # The root route on which each incoming alert enters. route: receiver: '${slack_default_receiver}' # The labels by which incoming alerts are grouped together. For example, # multiple alerts coming in for cluster=A and alertname=LatencyHigh would # be batched into a single group. # # To aggregate by all possible labels use '...' as the sole label name. # This effectively disables aggregation entirely, passing through all # alerts as-is. This is unlikely to be what you want, unless you have # a very low alert volume or your upstream notification system performs # its own grouping. Example: group_by: [...] group_by: ['alertname'] # When a new group of alerts is created by an incoming alert, wait at # least 'group_wait' to send the initial notification. # This way ensures that you get multiple alerts for the same group that start # firing shortly after another are batched together on the first # notification. group_wait: 30s # When the first notification was sent, wait 'group_interval' to send a batch # of new alerts that started firing for that group. group_interval: 5m # If an alert has successfully been sent, wait 'repeat_interval' to # resend them. repeat_interval: 3h # All the above attributes are inherited by all child routes and can # overwritten on each. # The child route trees. routes: - match_re: alertname: JenkinsJob.* receiver: ${slack_jenkins_receiver} routes: - match: severity: critical receiver: '${slack_jenkins_receiver}' - match_re: service: .* receiver: ${slack_default_receiver} routes: - match: severity: critical receiver: '${slack_default_receiver}' # Inhibition rules allow to mute a set of alerts given that another alert is # firing. # We use this to mute any warning-level notifications if the same alert is # already critical. inhibit_rules: - source_match: severity: 'critical' target_match: severity: 'warning' equal: ['alertname', 'instance'] receivers: - name: '${slack_jenkins_receiver}' slack_configs: - api_url: 'https://hooks.slack.com/services/${slack_jenkins_api_key}' channel: '#${slack_jenkins_channel}' send_resolved: true icon_url: https://avatars3.githubusercontent.com/u/3380462 title: |- [{{ .Status | toUpper }}{{ if eq .Status "firing" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }} {{- if gt (len .CommonLabels) (len .GroupLabels) -}} {{" "}}( {{- with .CommonLabels.Remove .GroupLabels.Names }} {{- range $index, $label := .SortedPairs -}} {{ if $index }}, {{ end }} {{- $label.Name }}="{{ $label.Value -}}" {{- end }} {{- end -}} ) {{- end }} text: >- {{ range .Alerts -}} *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }} *Description:* {{ .Annotations.description }} *Details:* {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}` {{ end }} {{ end }} - name: '${slack_default_receiver}' slack_configs: - api_url: 'https://hooks.slack.com/services/${slack_default_api_key}' channel: '#${slack_default_channel}' send_resolved: true icon_url: https://avatars3.githubusercontent.com/u/3380462 title: |- [{{ .Status | toUpper }}{{ if eq .Status "firing" }}:{{ .Alerts.Firing | len }}{{ end }}] {{ .CommonLabels.alertname }} for {{ .CommonLabels.job }} {{- if gt (len .CommonLabels) (len .GroupLabels) -}} {{" "}}( {{- with .CommonLabels.Remove .GroupLabels.Names }} {{- range $index, $label := .SortedPairs -}} {{ if $index }}, {{ end }} {{- $label.Name }}="{{ $label.Value -}}" {{- end }} {{- end -}} ) {{- end }} text: >- {{ range .Alerts -}} *Alert:* {{ .Annotations.summary }}{{ if .Labels.severity }} - `{{ .Labels.severity }}`{{ end }} *Description:* {{ .Annotations.description }} *Details:* {{ range .Labels.SortedPairs }} • *{{ .Name }}:* `{{ .Value }}` {{ end }} {{ end }} EOH } # The service stanza instructs Nomad to register a service with Consul. # # For more information and examples on the "task" stanza, please see # the online documentation at: # # https://www.nomadproject.io/docs/job-specification/service # service { name = "${service_name}" port = "${service_name}" tags = [ "${service_name}$${NOMAD_ALLOC_INDEX}" ] check { name = "Alertmanager Check Live" type = "http" path = "/-/healthy" interval = "10s" timeout = "2s" } } # The "resources" stanza describes the requirements a task needs to # execute. Resource requirements include memory, network, cpu, and more. # This ensures the task will execute on a machine that contains enough # resource capacity. # # For more information and examples on the "resources" stanza, please see # the online documentation at: # # https://www.nomadproject.io/docs/job-specification/resources # resources { cpu = ${cpu} memory = ${mem} # The network stanza specifies the networking requirements for the task # group, including the network mode and port allocations. When scheduling # jobs in Nomad they are provisioned across your fleet of machines along # with other jobs and services. Because you don't know in advance what host # your job will be provisioned on, Nomad will provide your tasks with # network configuration when they start up. # # For more information and examples on the "template" stanza, please see # the online documentation at: # # https://www.nomadproject.io/docs/job-specification/network # network { port "${service_name}" { static = ${port} } } } } } }