# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""VPP Configuration File Generator library."""

import re

from resources.libraries.python.ssh import exec_cmd_no_error
from resources.libraries.python.topology import NodeType
from resources.libraries.python.topology import Topology
from resources.libraries.python.VPPUtil import VPPUtil

__all__ = ['VppConfigGenerator']


def pci_dev_check(pci_dev):
    """Check if provided PCI address is in correct format.

    :param pci_dev: PCI address (expected format: xxxx:xx:xx.x).
    :type pci_dev: str
    :returns: True if PCI address is in correct format.
    :rtype: bool
    :raises ValueError: If PCI address is in incorrect format.
    """
    pattern = re.compile("^[0-9A-Fa-f]{4}:[0-9A-Fa-f]{2}:"
                         "[0-9A-Fa-f]{2}\\.[0-9A-Fa-f]$")
    if not pattern.match(pci_dev):
        raise ValueError('PCI address {addr} is not in valid format '
                         'xxxx:xx:xx.x'.format(addr=pci_dev))
    return True


class VppConfigGenerator(object):
    """VPP Configuration File Generator."""

    def __init__(self):
        """Initialize library."""
        # VPP Node to apply configuration on
        self._node = ''
        # VPP Hostname
        self._hostname = ''
        # VPP Configuration
        self._nodeconfig = {}
        # Serialized VPP Configuration
        self._vpp_config = ''
        # VPP Service name
        self._vpp_service_name = 'vpp'
        # VPP Logfile location
        self._vpp_logfile = '/tmp/vpe.log'
        # VPP Startup config location
        self._vpp_startup_conf = '/etc/vpp/startup.conf'
        # VPP Startup config backup location
        self._vpp_startup_conf_backup = None

    def set_node(self, node):
        """Set DUT node.

        :param node: Node to store configuration on.
        :type node: dict
        :raises RuntimeError: If Node type is not DUT.
        """
        if node['type'] != NodeType.DUT:
            raise RuntimeError('Startup config can only be applied to DUT'
                               'node.')
        self._node = node
        self._hostname = Topology.get_node_hostname(node)

    def set_vpp_logfile(self, logfile):
        """Set VPP logfile location.

        :param logfile: VPP logfile location.
        :type logfile: str
        """
        self._vpp_logfile = logfile

    def set_vpp_startup_conf_backup(self, backup='/etc/vpp/startup.backup'):
        """Set VPP startup configuration backup.

        :param backup: VPP logfile location.
        :type backup: str
        """
        self._vpp_startup_conf_backup = backup

    def get_config_str(self):
        """Get dumped startup configuration in VPP config format.

        :returns: Startup configuration in VPP config format.
        :rtype: str
        """
        self.dump_config(self._nodeconfig)
        return self._vpp_config

    def add_config_item(self, config, value, path):
        """Add startup configuration item.

        :param config: Startup configuration of node.
        :param value: Value to insert.
        :param path: Path where to insert item.
        :type config: dict
        :type value: str
        :type path: list
        """
        if len(path) == 1:
            config[path[0]] = value
            return
        if path[0] not in config:
            config[path[0]] = {}
        elif isinstance(config[path[0]], str):
            config[path[0]] = {} if config[path[0]] == '' \
                else {config[path[0]]: ''}
        self.add_config_item(config[path[0]], value, path[1:])

    def dump_config(self, obj, level=-1):
        """Dump the startup configuration in VPP config format.

        :param obj: Python Object to print.
        :param level: Nested level for indentation.
        :type obj: Obj
        :type level: int
        :returns: nothing
        """
        indent = '  '
        if level >= 0:
            self._vpp_config += '{}{{\n'.format((level) * indent)
        if isinstance(obj, dict):
            for key, val in obj.items():
                if hasattr(val, '__iter__'):
                    self._vpp_config += '{}{}\n'.format((level + 1) * indent,
                                                        key)
                    self.dump_config(val, level + 1)
                else:
                    self._vpp_config += '{}{} {}\n'.format((level + 1) * indent,
                                                           key, val)
        else:
            for val in obj:
                self._vpp_config += '{}{}\n'.format((level + 1) * indent, val)
        if level >= 0:
            self._vpp_config += '{}}}\n'.format(level * indent)

    def add_unix_log(self, value=None):
        """Add UNIX log configuration.

        :param value: Log file.
        :type value: str
        """
        path = ['unix', 'log']
        if value is None:
            value = self._vpp_logfile
        self.add_config_item(self._nodeconfig, value, path)

    def add_unix_cli_listen(self, value='/run/vpp/cli.sock'):
        """Add UNIX cli-listen configuration.

        :param value: CLI listen address and port or path to CLI socket.
        :type value: str
        """
        path = ['unix', 'cli-listen']
        self.add_config_item(self._nodeconfig, value, path)

    def add_unix_gid(self, value='vpp'):
        """Add UNIX gid configuration.

        :param value: Gid.
        :type value: str
        """
        path = ['unix', 'gid']
        self.add_config_item(self._nodeconfig, value, path)

    def add_unix_nodaemon(self):
        """Add UNIX nodaemon configuration."""
        path = ['unix', 'nodaemon']
        self.add_config_item(self._nodeconfig, '', path)

    def add_unix_coredump(self):
        """Add UNIX full-coredump configuration."""
        path = ['unix', 'full-coredump']
        self.add_config_item(self._nodeconfig, '', path)

    def add_unix_exec(self, value):
        """Add UNIX exec configuration."""
        path = ['unix', 'exec']
        self.add_config_item(self._nodeconfig, value, path)

    def add_api_segment_gid(self, value='vpp'):
        """Add API-SEGMENT gid configuration.

        :param value: Gid.
        :type value: str
        """
        path = ['api-segment', 'gid']
        self.add_config_item(self._nodeconfig, value, path)

    def add_api_segment_global_size(self, value):
        """Add API-SEGMENT global-size configuration.

        :param value: Global size.
        :type value: str
        """
        path = ['api-segment', 'global-size']
        self.add_config_item(self._nodeconfig, value, path)

    def add_api_segment_api_size(self, value):
        """Add API-SEGMENT api-size configuration.

        :param value: API size.
        :type value: str
        """
        path = ['api-segment', 'api-size']
        self.add_config_item(self._nodeconfig, value, path)

    def add_buffers_per_numa(self, value):
        """Increase number of buffers allocated.

        :param value: Number of buffers allocated.
        :type value: int
        """
        path = ['buffers', 'buffers-per-numa']
        self.add_config_item(self._nodeconfig, value, path)

    def add_dpdk_dev(self, *devices):
        """Add DPDK PCI device configuration.

        :param devices: PCI device(s) (format xxxx:xx:xx.x)
        :type devices: tuple
        """
        for device in devices:
            if pci_dev_check(device):
                path = ['dpdk', 'dev {0}'.format(device)]
                self.add_config_item(self._nodeconfig, '', path)

    def add_dpdk_dev_parameter(self, device, parameter, value):
        """Add parameter for DPDK device.

        :param device: PCI device (format xxxx:xx:xx.x).
        :param parameter: Parameter name.
        :param value: Parameter value.
        :type device: str
        :type parameter: str
        :type value: str
        """
        if pci_dev_check(device):
            path = ['dpdk', 'dev {0}'.format(device), parameter]
            self.add_config_item(self._nodeconfig, value, path)

    def add_dpdk_cryptodev(self, count):
        """Add DPDK Crypto PCI device configuration.

        :param count: Number of HW crypto devices to add.
        :type count: int
        """
        cryptodev = Topology.get_cryptodev(self._node)
        for i in range(count):
            cryptodev_config = 'dev {0}'.format(
                re.sub(r'\d.\d$', '1.'+str(i), cryptodev))
            path = ['dpdk', cryptodev_config]
            self.add_config_item(self._nodeconfig, '', path)
        self.add_dpdk_uio_driver('igb_uio')

    def add_dpdk_sw_cryptodev(self, sw_pmd_type, socket_id, count):
        """Add DPDK SW Crypto device configuration.

        :param sw_pmd_type: Type of SW crypto device PMD to add.
        :param socket_id: Socket ID.
        :param count: Number of SW crypto devices to add.
        :type sw_pmd_type: str
        :type socket_id: int
        :type count: int
        """
        for _ in range(count):
            cryptodev_config = 'vdev cryptodev_{0}_pmd,socket_id={1}'.\
                format(sw_pmd_type, str(socket_id))
            path = ['dpdk', cryptodev_config]
            self.add_config_item(self._nodeconfig, '', path)

    def add_dpdk_eth_bond_dev(self, ethbond_id, mode, xmit_policy, *slaves):
        """Add DPDK Eth_bond device configuration.

        :param ethbond_id: Eth_bond device ID.
        :param mode: Link bonding mode.
        :param xmit_policy: Transmission policy.
        :param slaves: PCI device(s) to be bonded (format xxxx:xx:xx.x).
        :type ethbond_id: str or int
        :type mode: str or int
        :type xmit_policy: str
        :type slaves: list
        """
        slaves_config = ',slave=' + \
                        ',slave='.join(slave if pci_dev_check(slave) else ''
                                       for slave in slaves)
        ethbond_config = 'vdev eth_bond{id},mode={mode}{slaves},' \
                         'xmit_policy={xmit_pol}'.format(id=ethbond_id,
                                                         mode=mode,
                                                         slaves=slaves_config,
                                                         xmit_pol=xmit_policy)
        path = ['dpdk', ethbond_config]
        self.add_config_item(self._nodeconfig, '', path)

    def add_dpdk_dev_default_rxq(self, value):
        """Add DPDK dev default rxq configuration.

        :param value: Default number of rxqs.
        :type value: str
        """
        path = ['dpdk', 'dev default', 'num-rx-queues']
        self.add_config_item(self._nodeconfig, value, path)

    def add_dpdk_dev_default_txq(self, value):
        """Add DPDK dev default txq configuration.

        :param value: Default number of txqs.
        :type value: str
        """
        path = ['dpdk', 'dev default', 'num-tx-queues']
        self.add_config_item(self._nodeconfig, value, path)

    def add_dpdk_dev_default_rxd(self, value):
        """Add DPDK dev default rxd configuration.

        :param value: Default number of rxds.
        :type value: str
        """
        path = ['dpdk', 'dev default', 'num-rx-desc']
        self.add_config_item(self._nodeconfig, value, path)

    def add_dpdk_dev_default_txd(self, value):
        """Add DPDK dev default txd configuration.

        :param value: Default number of txds.
        :type value: str
        """
        path = ['dpdk', 'dev default', 'num-tx-desc']
        self.add_config_item(self._nodeconfig, value, path)

    def add_dpdk_log_level(self, value):
        """Add DPDK log-level configuration.

        :param value: Log level.
        :type value: str
        """
        path = ['dpdk', 'log-level']
        self.add_config_item(self._nodeconfig, value, path)

    def add_dpdk_no_pci(self):
        """Add DPDK no-pci."""
        path = ['dpdk', 'no-pci']
        self.add_config_item(self._nodeconfig, '', path)

    def add_dpdk_uio_driver(self, value=None):
        """Add DPDK uio-driver configuration.

        :param value: DPDK uio-driver configuration. By default, driver will be
                      loaded automatically from Topology file, still leaving
                      option to manually override by parameter.
        :type value: str
        """
        if value is None:
            value = Topology.get_uio_driver(self._node)
        path = ['dpdk', 'uio-driver']
        self.add_config_item(self._nodeconfig, value, path)

    def add_cpu_main_core(self, value):
        """Add CPU main core configuration.

        :param value: Main core option.
        :type value: str
        """
        path = ['cpu', 'main-core']
        self.add_config_item(self._nodeconfig, value, path)

    def add_cpu_corelist_workers(self, value):
        """Add CPU corelist-workers configuration.

        :param value: Corelist-workers option.
        :type value: str
        """
        path = ['cpu', 'corelist-workers']
        self.add_config_item(self._nodeconfig, value, path)

    def add_heapsize(self, value):
        """Add Heapsize configuration.

        :param value: Amount of heapsize.
        :type value: str
        """
        path = ['heapsize']
        self.add_config_item(self._nodeconfig, value, path)

    def add_api_trace(self):
        """Add API trace configuration."""
        path = ['api-trace', 'on']
        self.add_config_item(self._nodeconfig, '', path)

    def add_ip6_hash_buckets(self, value):
        """Add IP6 hash buckets configuration.

        :param value: Number of IP6 hash buckets.
        :type value: str
        """
        path = ['ip6', 'hash-buckets']
        self.add_config_item(self._nodeconfig, value, path)

    def add_ip6_heap_size(self, value):
        """Add IP6 heap-size configuration.

        :param value: IP6 Heapsize amount.
        :type value: str
        """
        path = ['ip6', 'heap-size']
        self.add_config_item(self._nodeconfig, value, path)

    def add_ip_heap_size(self, value):
        """Add IP heap-size configuration.

        :param value: IP Heapsize amount.
        :type value: str
        """
        path = ['ip', 'heap-size']
        self.add_config_item(self._nodeconfig, value, path)

    def add_statseg_size(self, value):
        """Add stats segment heap size configuration.

        :param value: Stats heapsize amount.
        :type value: str
        """
        path = ['statseg', 'size']
        self.add_config_item(self._nodeconfig, value, path)

    def add_plugin(self, state, *plugins):
        """Add plugin section for specific plugin(s).

        :param state: State of plugin [enable|disable].
        :param plugins: Plugin(s) to disable.
        :type state: str
        :type plugins: list
        """
        for plugin in plugins:
            path = ['plugins', 'plugin {0}'.format(plugin), state]
            self.add_config_item(self._nodeconfig, ' ', path)

    def add_dpdk_no_multi_seg(self):
        """Add DPDK no-multi-seg configuration."""
        path = ['dpdk', 'no-multi-seg']
        self.add_config_item(self._nodeconfig, '', path)

    def add_dpdk_no_tx_checksum_offload(self):
        """Add DPDK no-tx-checksum-offload configuration."""
        path = ['dpdk', 'no-tx-checksum-offload']
        self.add_config_item(self._nodeconfig, '', path)

    def add_nat(self, value='deterministic'):
        """Add NAT configuration.

        :param value: NAT mode.
        :type value: str
        """
        path = ['nat']
        self.add_config_item(self._nodeconfig, value, path)

    def add_tcp_preallocated_connections(self, value):
        """Add TCP pre-allocated connections.

        :param value: The number of pre-allocated connections.
        :type value: int
        """
        path = ['tcp', 'preallocated-connections']
        self.add_config_item(self._nodeconfig, value, path)

    def add_tcp_preallocated_half_open_connections(self, value):
        """Add TCP pre-allocated half open connections.

        :param value: The number of pre-allocated half open connections.
        :type value: int
        """
        path = ['tcp', 'preallocated-half-open-connections']
        self.add_config_item(self._nodeconfig, value, path)

    def add_session_event_queue_length(self, value):
        """Add session event queue length.

        :param value: Session event queue length.
        :type value: int
        """
        path = ['session', 'event-queue-length']
        self.add_config_item(self._nodeconfig, value, path)

    def add_session_preallocated_sessions(self, value):
        """Add the number of pre-allocated sessions.

        :param value: Number of pre-allocated sessions.
        :type value: int
        """
        path = ['session', 'preallocated-sessions']
        self.add_config_item(self._nodeconfig, value, path)

    def add_session_v4_session_table_buckets(self, value):
        """Add number of v4 session table buckets to the config.

        :param value: Number of v4 session table buckets.
        :type value: int
        """
        path = ['session', 'v4-session-table-buckets']
        self.add_config_item(self._nodeconfig, value, path)

    def add_session_v4_session_table_memory(self, value):
        """Add the size of v4 session table memory.

        :param value: Size of v4 session table memory.
        :type value: str
        """
        path = ['session', 'v4-session-table-memory']
        self.add_config_item(self._nodeconfig, value, path)

    def add_session_v4_halfopen_table_buckets(self, value):
        """Add the number of v4 halfopen table buckets.

        :param value: Number of v4 halfopen table buckets.
        :type value: int
        """
        path = ['session', 'v4-halfopen-table-buckets']
        self.add_config_item(self._nodeconfig, value, path)

    def add_session_v4_halfopen_table_memory(self, value):
        """Add the size of v4 halfopen table memory.

        :param value: Size of v4 halfopen table memory.
        :type value: str
        """
        path = ['session', 'v4-halfopen-table-memory']
        self.add_config_item(self._nodeconfig, value, path)

    def add_session_local_endpoints_table_buckets(self, value):
        """Add the number of local endpoints table buckets.

        :param value: Number of local endpoints table buckets.
        :type value: int
        """
        path = ['session', 'local-endpoints-table-buckets']
        self.add_config_item(self._nodeconfig, value, path)

    def add_session_local_endpoints_table_memory(self, value):
        """Add the size of local endpoints table memory.

        :param value: Size of local endpoints table memory.
        :type value: str
        """
        path = ['session', 'local-endpoints-table-memory']
        self.add_config_item(self._nodeconfig, value, path)

    def write_config(self, filename=None):
        """Generate and write VPP startup configuration to file.

        Use data from calls to this class to form a startup.conf file and
        replace /etc/vpp/startup.conf with it on topology node.

        :param filename: Startup configuration file name.
        :type filename: str
        """
        self.dump_config(self._nodeconfig)

        if filename is None:
            filename = self._vpp_startup_conf

        if self._vpp_startup_conf_backup is not None:
            cmd = ('cp {src} {dest}'.format(
                src=self._vpp_startup_conf, dest=self._vpp_startup_conf_backup))
            exec_cmd_no_error(
                self._node, cmd, sudo=True, message='Copy config file failed!')

        cmd = ('echo "{config}" | sudo tee {filename}'.format(
            config=self._vpp_config, filename=filename))
        exec_cmd_no_error(
            self._node, cmd, message='Writing config file failed!')

    def apply_config(self, filename=None, verify_vpp=True):
        """Generate and write VPP startup configuration to file and restart VPP.

        Use data from calls to this class to form a startup.conf file and
        replace /etc/vpp/startup.conf with it on topology node.

        :param filename: Startup configuration file name.
        :param verify_vpp: Verify VPP is running after restart.
        :type filename: str
        :type verify_vpp: bool
        """
        self.write_config(filename=filename)

        VPPUtil.restart_vpp_service(self._node)
        if verify_vpp:
            VPPUtil.verify_vpp(self._node)

    def restore_config(self):
        """Restore VPP startup.conf from backup."""
        cmd = ('cp {src} {dest}'.format(
            src=self._vpp_startup_conf_backup, dest=self._vpp_startup_conf))
        exec_cmd_no_error(
            self._node, cmd, sudo=True, message='Copy config file failed!')