# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. """Implementation of keywords for Honeycomb setup.""" from robot.api import logger from resources.libraries.python.HTTPRequest import HTTPRequest, HTTPCodes, \ HTTPRequestError from resources.libraries.python.constants import Constants as Const from resources.libraries.python.honeycomb.HoneycombUtil import HoneycombError from resources.libraries.python.honeycomb.HoneycombUtil \ import HoneycombUtil as HcUtil from resources.libraries.python.ssh import SSH from resources.libraries.python.topology import NodeType class HoneycombSetup(object): """Implements keywords for Honeycomb setup. The keywords implemented in this class make possible to: - start Honeycomb, - stop Honeycomb, - check the Honeycomb start-up state, - check the Honeycomb shutdown state, - add VPP to the topology. """ def __init__(self): pass @staticmethod def start_honeycomb_on_duts(*nodes): """Start Honeycomb on specified DUT nodes. This keyword starts the Honeycomb service on specified DUTs. The keyword just starts the Honeycomb and does not check its startup state. Use the keyword "Check Honeycomb Startup State" to check if the Honeycomb is up and running. Honeycomb must be installed in "/opt" directory, otherwise the start will fail. :param nodes: List of nodes to start Honeycomb on. :type nodes: list :raises HoneycombError: If Honeycomb fails to start. """ HoneycombSetup.print_environment(nodes) logger.console("\nStarting Honeycomb service ...") cmd = "sudo service honeycomb start" for node in nodes: if node['type'] == NodeType.DUT: ssh = SSH() ssh.connect(node) (ret_code, _, _) = ssh.exec_command_sudo(cmd) if int(ret_code) != 0: raise HoneycombError('Node {0} failed to start Honeycomb.'. format(node['host'])) else: logger.info("Starting the Honeycomb service on node {0} is " "in progress ...".format(node['host'])) @staticmethod def stop_honeycomb_on_duts(*nodes): """Stop the Honeycomb service on specified DUT nodes. This keyword stops the Honeycomb service on specified nodes. It just stops the Honeycomb and does not check its shutdown state. Use the keyword "Check Honeycomb Shutdown State" to check if Honeycomb has stopped. :param nodes: List of nodes to stop Honeycomb on. :type nodes: list :raises HoneycombError: If Honeycomb failed to stop. """ logger.console("\nShutting down Honeycomb service ...") cmd = "sudo service honeycomb stop" errors = [] for node in nodes: if node['type'] == NodeType.DUT: ssh = SSH() ssh.connect(node) (ret_code, _, _) = ssh.exec_command_sudo(cmd) if int(ret_code) != 0: errors.append(node['host']) else: logger.info("Stopping the Honeycomb service on node {0} is " "in progress ...".format(node['host'])) if errors: raise HoneycombError('Node(s) {0} failed to stop Honeycomb.'. format(errors)) @staticmethod def check_honeycomb_startup_state(*nodes): """Check state of Honeycomb service during startup on specified nodes. Reads html path from template file oper_vpp_version.url. Honeycomb nodes reply with connection refused or the following status codes depending on startup progress: codes 200, 401, 403, 404, 500, 503 :param nodes: List of DUT nodes starting Honeycomb. :type nodes: list :return: True if all GETs returned code 200(OK). :rtype bool """ path = HcUtil.read_path_from_url_file("oper_vpp_version") expected_status_codes = (HTTPCodes.UNAUTHORIZED, HTTPCodes.FORBIDDEN, HTTPCodes.NOT_FOUND, HTTPCodes.SERVICE_UNAVAILABLE, HTTPCodes.INTERNAL_SERVER_ERROR) for node in nodes: if node['type'] == NodeType.DUT: HoneycombSetup.print_ports(node) status_code, _ = HTTPRequest.get(node, path, timeout=10, enable_logging=False) if status_code == HTTPCodes.OK: logger.info("Honeycomb on node {0} is up and running". format(node['host'])) elif status_code in expected_status_codes: if status_code == HTTPCodes.UNAUTHORIZED: logger.info('Unauthorized. If this triggers keyword ' 'timeout, verify Honeycomb username and ' 'password.') raise HoneycombError('Honeycomb on node {0} running but ' 'not yet ready.'.format(node['host']), enable_logging=False) else: raise HoneycombError('Unexpected return code: {0}.'. format(status_code)) status_code, _ = HcUtil.get_honeycomb_data( node, "config_vpp_interfaces") if status_code != HTTPCodes.OK: raise HoneycombError('Honeycomb on node {0} running but ' 'not yet ready.'.format(node['host']), enable_logging=False) return True @staticmethod def check_honeycomb_shutdown_state(*nodes): """Check state of Honeycomb service during shutdown on specified nodes. Honeycomb nodes reply with connection refused or the following status codes depending on shutdown progress: codes 200, 404. :param nodes: List of DUT nodes stopping Honeycomb. :type nodes: list :return: True if all GETs fail to connect. :rtype bool """ cmd = "ps -ef | grep -v grep | grep honeycomb" for node in nodes: if node['type'] == NodeType.DUT: try: status_code, _ = HTTPRequest.get(node, '/index.html', timeout=5, enable_logging=False) if status_code == HTTPCodes.OK: raise HoneycombError('Honeycomb on node {0} is still ' 'running.'.format(node['host']), enable_logging=False) elif status_code == HTTPCodes.NOT_FOUND: raise HoneycombError('Honeycomb on node {0} is shutting' ' down.'.format(node['host']), enable_logging=False) else: raise HoneycombError('Unexpected return code: {0}.'. format(status_code)) except HTTPRequestError: logger.debug('Connection refused, checking the process ' 'state ...') ssh = SSH() ssh.connect(node) (ret_code, _, _) = ssh.exec_command_sudo(cmd) if ret_code == 0: raise HoneycombError('Honeycomb on node {0} is still ' 'running.'.format(node['host']), enable_logging=False) else: logger.info("Honeycomb on node {0} has stopped". format(node['host'])) return True @staticmethod def configure_unsecured_access(*nodes): """Configure Honeycomb to allow restconf requests through insecure HTTP used by tests. By default this is only allowed for localhost. :param nodes: All nodes in test topology. :type nodes: dict :raises HoneycombError: If the configuration could not be changed. """ # TODO: Modify tests to use HTTPS instead. find = "restconf-binding-address" replace = '\\"restconf-binding-address\\": \\"0.0.0.0\\",' argument = '"/{0}/c\\ {1}"'.format(find, replace) path = "{0}/config/honeycomb.json".format(Const.REMOTE_HC_DIR) command = "sed -i {0} {1}".format(argument, path) ssh = SSH() for node in nodes: if node['type'] == NodeType.DUT: ssh.connect(node) (ret_code, _, stderr) = ssh.exec_command_sudo(command) if ret_code != 0: raise HoneycombError("Failed to modify configuration on " "node {0}, {1}".format(node, stderr)) @staticmethod def print_environment(nodes): """Print information about the nodes to log. The information is defined by commands in cmds tuple at the beginning of this method. :param nodes: List of DUT nodes to get information about. :type nodes: list """ # TODO: When everything is set and running in VIRL env, transform this # method to a keyword checking the environment. cmds = ("uname -a", "df -lh", "echo $JAVA_HOME", "echo $PATH", "which java", "java -version", "dpkg --list | grep openjdk", "ls -la /opt/honeycomb") for node in nodes: if node['type'] == NodeType.DUT: logger.info("Checking node {} ...".format(node['host'])) for cmd in cmds: logger.info("Command: {}".format(cmd)) ssh = SSH() ssh.connect(node) ssh.exec_command_sudo(cmd) @staticmethod def print_ports(node): """Uses "sudo netstat -anp | grep java" to print port where a java application listens. :param node: Honeycomb node where we want to print the ports. :type node: dict """ cmds = ("netstat -anp | grep java", "ps -ef | grep [h]oneycomb") logger.info("Checking node {} ...".format(node['host'])) for cmd in cmds: logger.info("Command: {}".format(cmd)) ssh = SSH() ssh.connect(node) ssh.exec_command_sudo(cmd) @staticmethod def configure_log_level(node, level): """Set Honeycomb logging to the specified level. :param node: Honeycomb node. :param level: Log level (INFO, DEBUG, TRACE). :type node: dict :type level: str """ find = 'logger name=\\"io.fd\\"' replace = ''.format(level) argument = '"/{0}/c\\ {1}"'.format(find, replace) path = "{0}/config/logback.xml".format(Const.REMOTE_HC_DIR) command = "sed -i {0} {1}".format(argument, path) ssh = SSH() ssh.connect(node) (ret_code, _, stderr) = ssh.exec_command_sudo(command) if ret_code != 0: raise HoneycombError("Failed to modify configuration on " "node {0}, {1}".format(node, stderr)) @staticmethod def enable_module_features(node, *features): """Configure Honeycomb to use VPP modules that are disabled by default. ..Note:: If the module is not enabled in VPP, Honeycomb will be unable to establish VPP connection. :param node: Honeycomb node. :param features: Features to enable. :type node: dict :type features: string :raises HoneycombError: If the configuration could not be changed. """ disabled_features = { "NSH": "io.fd.hc2vpp.vppnsh.impl.VppNshModule" } ssh = SSH() ssh.connect(node) for feature in features: if feature in disabled_features.keys(): # uncomment by replacing the entire line find = replace = "{0}".format(disabled_features[feature]) argument = '"/{0}/c\\ {1}"'.format(find, replace) path = "{0}/modules/*module-config"\ .format(Const.REMOTE_HC_DIR) command = "sed -i {0} {1}".format(argument, path) (ret_code, _, stderr) = ssh.exec_command_sudo(command) if ret_code != 0: raise HoneycombError("Failed to modify configuration on " "node {0}, {1}".format(node, stderr)) else: raise HoneycombError( "Unrecognized feature {0}.".format(feature)) @staticmethod def copy_java_libraries(node): """Copy Java libraries installed by vpp-api-java package to honeycomb lib folder. This is a (temporary?) workaround for jvpp version mismatches. :param node: Honeycomb node :type node: dict """ ssh = SSH() ssh.connect(node) (_, stdout, _) = ssh.exec_command_sudo( "ls /usr/share/java | grep ^jvpp-*") files = stdout.split("\n")[:-1] for item in files: # example filenames: # jvpp-registry-17.04.jar # jvpp-core-17.04.jar parts = item.split("-") version = "{0}-SNAPSHOT".format(parts[2][:5]) artifact_id = "{0}-{1}".format(parts[0], parts[1]) directory = "{0}/lib/io/fd/vpp/{1}/{2}".format( Const.REMOTE_HC_DIR, artifact_id, version) cmd = "sudo mkdir -p {0}; " \ "sudo cp /usr/share/java/{0} {1}/{2}-{3}.jar".format( item, directory, artifact_id, version) (ret_code, _, stderr) = ssh.exec_command(cmd) if ret_code != 0: raise HoneycombError("Failed to copy JVPP libraries on " "node {0}, {1}".format(node, stderr))