# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Library | resources.libraries.python.InterfaceUtil | ... | WITH NAME | interfaceCLI | Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords | ... | WITH NAME | InterfaceAPI | Library | resources.libraries.python.IPv4Util | Library | resources.libraries.python.TrafficScriptExecutor *** Keywords *** | Honeycomb configures interface state | | [Documentation] | Uses Honeycomb API to change the admin state\ | | ... | of the specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - state - state to set on interface. Type:string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb configures interface state \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| up \| | | [Arguments] | ${node} | ${interface} | ${state} | | interfaceAPI.Set interface state | ${node} | ${interface} | ${state} | Interface state from Honeycomb should be | | [Documentation] | Retrieves interface admin state through Honeycomb and\ | | ... | compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - state - expected interface state. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Interface state from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| up \| | | [Arguments] | ${node} | ${interface} | ${state} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | ${api_state}= | Set Variable | ${api_data['admin-status']} | | Should be equal | ${api_state} | ${state} | Interface state from VAT should be | | [Documentation] | Retrieves interface admin state through VAT and compares\ | | ... | with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - state - expected interface state. Type: string | | ... | | ... | _NOTE:_ Vat returns state as int (1/0) instead of string (up/down). | | ... | This keyword also handles translation. | | ... | | ... | *Example:* | | ... | | ... | \| Interface state from VAT should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| up \| | | [Arguments] | ${node} | ${interface} | ${state} | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | ${vat_state}= | Set Variable if | | ... | ${vat_data['admin_up_down']} == 1 | up | down | | Should be equal | ${vat_state} | ${state} | Honeycomb sets interface IPv4 address | | [Documentation] | Uses Honeycomb API to change ipv4 address\ | | ... | of the specified interface. Any existing addresses will be removed. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - netmask - subnet mask to set. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface IPv4 address \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${netmask} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${netmask} | Honeycomb sets interface IPv4 address with prefix | | [Documentation] | Uses Honeycomb API to assign an ipv4 address to the\ | | ... | specified interface. Any existing addresses will be removed. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of address network prefix. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface IPv4 address with prefix \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | Honeycomb adds interface IPv4 address | | [Documentation] | Uses Honeycomb API to add an ipv4 address to the\ | | ... | specified interface, without removing existing addresses. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of address network prefix. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds interface IPv4 address \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add ipv4 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | Honeycomb fails to add interface IPv4 address | | [Documentation] | Uses Honeycomb API to add an ipv4 address to the\ | | ... | specified interface, and expects to fail with code 500. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of address network prefix. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb fails to add interface IPv4 address \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | Run Keyword and Expect Error | *not successful. Status code: 500. | | ... | Honeycomb adds interface IPv4 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | IPv4 address from Honeycomb should be | | [Documentation] | Retrieves interface ipv4 address through Honeycomb\ | | ... | and compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - prefix - prefix length to expect. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 address from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| ${24} \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | ${settings}= | Create Dictionary | | ... | ip=${address} | prefix-length=${prefix} | | Should contain | ${api_data['ietf-ip:ipv4']['address']} | ${settings} | IPv4 address from VAT should be | | [Documentation] | Retrieves interface ipv4 address through VAT and\ | | ... | compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - prefix - prefix length to expect. Type: string | | ... | - netmask - subnet mask to expect. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 address from VAT should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| ${24} \| 255.255.255.0 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | ${netmask} | | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv4 | | ${settings}= | Create Dictionary | | ... | ip=${address} | netmask=${netmask} | prefix_length=${prefix} | | Should contain | ${vpp_data} | ${settings} | Honeycomb removes interface IPv4 addresses | | [Documentation] | Removes all configured ipv4 addresses from the specified\ | | ... | interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb removes interface IPv4 addresses \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | Remove all ipv4 addresses | ${node} | ${interface} | IPv4 address from Honeycomb should be empty | | [Documentation] | Retrieves interface ipv4 configuration through Honeycomb\ | | ... | and expects to find no IPv4 addresses. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 address from Honeycomb should be empty\| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Run keyword and expect error | *KeyError:* | | ... | Set Variable | ${api_data['ietf-ip:ipv4']['address']} | IPv4 address from VAT should be empty | | [Documentation] | Retrieves interface ipv4 configuration through VAT and\ | | ... | and expects to find no ipv4 addresses. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 config from VAT should be empty \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | Run keyword and expect error | *No JSON object could be decoded* | | ... | InterfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv4 | Honeycomb adds interface IPv4 neighbor | | [Documentation] | Uses Honeycomb API to assign an ipv4 neighbor to the\ | | ... | specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - fib_address - IP address to add to fib table. Type: string | | ... | - fib_mac - MAC address to add to fib table. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds interface IPv4 neighbor \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \ | | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac} | | interfaceAPI.Add ipv4 neighbor | | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac} | IPv4 neighbor from Honeycomb should be | | [Documentation] | Retrieves ipv4 neighbor list through Honeycomb\ | | ... | and checks if it contains address supplied in arguments. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - ip_address - ipv4 address of expected neighbor entry. Type: string | | ... | - mac_address - MAC address of expected neighbor entry. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 neighbor from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.4 \| 08:00:27:60:26:ab \| | | [Arguments] | ${node} | ${interface} | ${ip_address} | ${mac_address} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | ${settings}= | Create Dictionary | | ... | ip=${ip_address} | link-layer-address=${mac_address} | origin=static | | Should contain | ${api_data['ietf-ip:ipv4']['neighbor']} | ${settings} | Honeycomb clears all interface IPv4 neighbors | | [Documentation] | Uses Honeycomb API to remove all ipv4 neighbors from the\ | | ... | specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb clears all interface IPv4 neighbors \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | interfaceAPI.Remove all ipv4 neighbors | ${node} | ${interface} | IPv4 neighbor from Honeycomb should be empty | | [Documentation] | Retrieves ipv4 neighbor list through Honeycomb\ | | ... | and expects to find no ipv4 neighbors. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 neighbor from Honeycomb should be empty \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Run keyword and expect error | *KeyError:* | | ... | Set Variable | ${api_data['ietf-ip:ipv4']['neighbor'][0]['ip']} | Honeycomb sets interface IPv6 address | | [Documentation] | Uses Honeycomb API to change ipv6 address\ | | ... | of the specified interface. Existing IPv6 addresses will be removed,\ | | ... | with the exception of self-configured link-layer IPv6. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of subnet prefix to set. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface IPv6 address \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add first ipv6 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | Honeycomb adds interface IPv6 address | | [Documentation] | Uses Honeycomb API to add an ipv6 address\ | | ... | to the specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of subnet prefix to set. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds interface IPv6 address \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add ipv6 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | Honeycomb fails to add interface IPv6 address | | [Documentation] | Uses Honeycomb API to add an ipv6 address to the\ | | ... | specified interface, and expects to fail with code 500. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of address network prefix. Type:integer | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb fails to add interface IPv6 address \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | Run Keyword and Expect Error | *not successful. Status code: 500. | | ... | Honeycomb adds interface IPv6 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | IPv6 address from Honeycomb should contain | | [Documentation] | Retrieves interface ipv6 address through Honeycomb\ | | ... | and compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - prefix - length of subnet prefix to expect. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv6 address from Honeycomb should contain \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | ${settings}= | Create Dictionary | | ... | ip=${address} | prefix-length=${prefix} | | Should contain | ${api_data['ietf-ip:ipv6']['address']} | ${settings} | IPv6 address from VAT should contain | | [Documentation] | Retrieves interface ipv6 address through VAT and\ | | ... | compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - prefix - length of subnet prefix to expect. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv6 address from VAT should contain \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv6 | | ${settings}= | Create Dictionary | | ... | ip=${address} | prefix_length=${prefix} | | Should contain | ${vpp_data} | ${settings} | Honeycomb removes interface IPv6 addresses | | [Documentation] | Removes all configured ipv6 addresses from the specified\ | | ... | interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb removes interface IPv6 addresses \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | Remove all ipv6 addresses | ${node} | ${interface} | IPv6 address from Honeycomb should be empty | | [Documentation] | Retrieves interface ipv6 configuration through Honeycomb\ | | ... | and expects to find no IPv6 addresses. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv6 address from Honeycomb should be empty\| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Run keyword and expect error | *KeyError:* | | ... | Set Variable | ${api_data['ietf-ip:ipv6']['address']} | IPv6 address from VAT should be empty | | [Documentation] | Retrieves interface ipv6 configuration through VAT and\ | | ... | expects to find no ipv6 addresses. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv6 config from VAT should be empty \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | Run keyword and expect error | *No JSON object could be decoded* | | ... | InterfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv6 | Honeycomb adds interface IPv6 neighbor | | [Documentation] | Uses Honeycomb API to assign an ipv6 neighbor to the\ | | ... | specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - fib_address - IP address to add to fib table. Type: string | | ... | - fib_mac - MAC address to add to fib table. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds interface IPv6 neighbor \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \| | | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac} | | InterfaceAPI.Add ipv6 neighbor | | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac} | IPv6 neighbor from Honeycomb should be | | [Documentation] | Retrieves ipv6 neighbor list through Honeycomb\ | | ... | and checks if it contains address supplied in arguments. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - ip_address - ipv6 address of expected neighbor entry. Type: string | | ... | - mac_address - MAC address of expected neighbor entry. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv6 neighbor from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.4 \| 08:00:27:60:26:ab \| | | [Arguments] | ${node} | ${interface} | ${ip_address} | ${mac_address} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | ${settings}= | Create Dictionary | | ... | ip=${ip_address} | link-layer-address=${mac_address} | origin=static | | Should contain | ${api_data['ietf-ip:ipv6']['neighbor']} | ${settings} | Honeycomb clears all interface IPv6 neighbors | | [Documentation] | Uses Honeycomb API to remove all ipv6 neighbors from the\ | | ... | specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb clears all interface IPv6 neighbors \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | interfaceAPI.Remove all ipv6 neighbors | ${node} | ${interface} | IPv6 neighbor from Honeycomb should be empty | | [Documentation] | Retrieves ipv6 neighbor list through Honeycomb\ | | ... | and expects to find no ipv6 neighbors. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv6 neighbor from Honeycomb should be empty \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Run keyword and expect error | *KeyError:* | | ... | Set Variable | ${api_data['ietf-ip:ipv6']['neighbor'][0]['ip']} | Honeycomb sets interface ethernet configuration | | [Documentation] | Uses Honeycomb API to change interface ethernet\ | | ... | configuration. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - ethernet - interface ethernet settings. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface ethernet configuration \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${{'mtu': 1500}} \ | | [Arguments] | ${node} | ${interface} | ${ethernet} | | :FOR | ${key} | IN | @{ethernet.keys()} | | | interfaceAPI.Configure interface ethernet | | | ... | ${node} | ${interface} | ${key} | ${ethernet['${key}']} | Interface ethernet Operational Data From Honeycomb Should Be | | [Documentation] | Retrieves interface ethernet configuration\ | | ... | through Honeycomb and compares with settings supplied in arguments. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - ethernet - interface ethernet settings. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Interface ethernet Operational Data From Honeycomb Should Be \ | | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \ | | ... | \| ${{'mtu': 1500}} \| | | [Arguments] | ${node} | ${interface} | ${ethernet} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | :FOR | ${key} | IN | @{ethernet.keys()} | | | Should be equal | | | ... | ${api_data['v3po:ethernet']['${key}']} | ${ethernet['${key}']} | Interface ethernet Operational Data From VAT Should Be | | [Documentation] | Retrieves interface ethernet configuration\ | | ... | through VAT and compares with settings supplied in arguments. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - mtu - value of maximum transmission unit expected. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Interface ethernet Operational Data From VAT Should Be \ | | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1500} \| | | [Arguments] | ${node} | ${interface} | ${mtu} | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | Should be equal | ${vat_data['mtu']} | ${mtu} | Honeycomb sets interface VRF ID | | [Documentation] | Uses Honeycomb API to change interface vrf\ | | ... | configuration. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - vrf_id - vrf ID to configure. Type:integer | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface VRF ID \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| ipv4 \| | | [Arguments] | ${node} | ${interface} | ${vrf_id} | ${ip_version} | | interfaceAPI.Configure interface routing | | ... | ${node} | ${interface} | ${ip_version}-vrf-id | ${vrf_id} | Interface VRF ID from Honeycomb should be | | [Documentation] | Retrieves interface ethernet configuration\ | | ... | through Honeycomb and compares with settings supplied in arguments. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - vrf_id - vrf ID to expect. Type:integer | | ... | - ip_version - IP protocol version, ipv4 or ipv6. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Interface VRF ID from Honeycomb should be \ | | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ | | ... | \| ipv4 \| | | [Arguments] | ${node} | ${interface} | ${vrf_id} | ${ip_version} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | | Should be equal | | ... | ${api_data['v3po:routing']['${ip_version}-vrf-id']} | ${vrf_id} | Interface VRF ID from VAT should be | | [Documentation] | Retrieves interface ethernet configuration\ | | ... | through VAT and compares with settings supplied in arguments. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - vrf_id - vrf ID to expect. Type:integer | | ... | | ... | *Example:* | | ... | | ... | \| Interface VRF ID from VAT should be \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| | | [Arguments] | ${node} | ${interface} | ${vrf_id} | | ${vat_data}= | InterfaceCLI.get interface vrf table | | ... | ${node} | ${interface} | | Should be equal | ${vat_data} | ${vrf_id} | Interface Operational Data From Honeycomb Should Be empty | | [Documentation] | Attempts to retrieve interface configuration through\ | | ... | Honeycomb and expects to get empty dictionary. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of a interface on the specified node. Type:\ | | ... | string | | ... | | ... | *Example:* | | ... | \| Interface Operational Data From Honeycomb Should Be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| | | ... | | [Arguments] | ${node} | ${interface} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Should be empty | ${api_data} | Interface Operational Data From VAT Should Be empty | | [Documentation] | Attempts to retrieve Interface configuration through\ | | ... | VAT and expects to get empty dictionary. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of a Interface on the specified node. Type:\ | | ... | string | | ... | | ... | *Example:* | | ... | \| Interface Operational Data From VAT Should Be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| | | ... | | [Arguments] | ${node} | ${interface} | | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | Should be empty | ${vat_data} | Interface indices from Honeycomb and VAT should correspond | | [Documentation] | Uses VAT and Honeycomb to get operational data about the\ | | ... | given interface and compares the interface indexes. The interface | | ... | index from Honeycomb should be greater than index from VAT by one. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of the interface to be checked. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Interface indices from Honeycomb and VAT should correspond \ | | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| | | ... | | [Arguments] | ${node} | ${interface} | | ... | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | ${sw_if_index}= | EVALUATE | ${vat_data['sw_if_index']} + 1 | | Should be equal as strings | | ... | ${api_data['if-index']} | ${sw_if_index} | Get interface index from oper data | | [Documentation] | Retrieves interface operational data and returns\ | | ... | if-index of the specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of the interface. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Get interface index from oper data \| ${nodes['DUT1']} \| local0 \| | | [Arguments] | ${node} | ${interface} | | ${data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Return from keyword | ${data['if-index']} | Honeycomb should show disabled interface in oper data | | [Documentation] | Retrieves list of disabled interfaces\ | | ... | and verifies that there is at least one. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - index - index of the interface to be checked. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb should show disabled interface in oper data \ | | ... | \| ${nodes['DUT1']} \| ${vx_interface} \| | | [Arguments] | ${node} | ${index} | | interfaceAPI.check disabled interface | ${node} | ${index} | Honeycomb should not show disabled interface in oper data | | [Documentation] | Retrieves list of disabled interfaces\ | | ... | and expects to fail with a 404 - not found. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - index - index of the interface to be checked. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb should not show disabled interface in oper data \ | | ... | \| ${nodes['DUT1']} \| ${vx_interface} \| | | [Arguments] | ${node} | ${index} | | Run keyword and expect error | * | | ... | Honeycomb should show disabled interface in oper data | | ... | ${node} | ${index} | Ping and verify IP address | | [Documentation] | Sends ICMP packet from IP (with source mac) to IP | | ... | (with dest mac), then waits for ICMP reply. | | ... | | ... | *Arguments:* | | ... | | ... | _NOTE:_ Arguments are based on topology: | | ... | TG(if1)->(if1)DUT(if2)->TG(if2) | | ... | | ... | - tg_node - Node to execute scripts on (TG). Type: dictionary | | ... | - src_ip - IP of source interface (TG-if1). Type: integer | | ... | - dst_ip - IP of destination interface (TG-if2). Type: integer | | ... | - tx_port - Source interface (TG-if1). Type: string | | ... | - tx_mac - MAC address of source interface (TG-if1). Type: string | | ... | - rx_port - Destionation interface (TG-if1). Type: string | | ... | - rx_mac - MAC address of destination interface (TG-if1). Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Ping verify IP address \| ${nodes['TG']} \ | | ... | \| 16.0.0.1 \| 32.0.0.1 \| eth2 \| 08:00:27:cc:4f:54 \ | | ... | \| eth4 \| 08:00:27:c9:6a:d5 \| | | ... | | [Arguments] | ${tg_node} | ${src_ip} | ${dst_ip} | ${tx_port} | | | ... | ${tx_mac} | ${rx_port} | ${rx_mac} | | ${tx_port_name}= | Get interface name | ${tg_node} | ${tx_port} | | ${rx_port_name}= | Get interface name | ${tg_node} | ${rx_port} | | ${args}= | Catenate | --src_mac | ${tx_mac} | | ... | --dst_mac | ${rx_mac} | | ... | --src_ip | ${src_ip} | | ... | --dst_ip | ${dst_ip} | | ... | --tx_if | ${tx_port_name} | | ... | --rx_if | ${rx_port_name} | | ... | --timeout | ${5} | | Run Traffic Script On Node | send_icmp_wait_for_reply.py | | ... | ${tg_node} | ${args} | Honeycomb adds unnumbered configuration to interface | | [Documentation] | Adds unnumbered configuration to interface, borrowing IP | | ... | address from the other specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - Name of the interface to be configured. Type: string | | ... | - interface_src - Name of the interface to borrow IP address from.\ | | ... | Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds unnumbered configuration to interface \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| GigabitEthernet0/9/0 \| | | ... | | [Arguments] | ${node} | ${Interface} | ${interface_src} | | Configure interface unnumbered | ${node} | ${interface} | ${interface_src} | Honeycomb removes unnumbered configuration from interface | | [Documentation] | Removes unnumbered configuration from the specified | | ... | interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - Name of the interface to be configured. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds unnumbered configuration to interface \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| | | ... | | [Arguments] | ${node} | ${Interface} | | Configure interface unnumbered | ${node} | ${interface}