# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Library | resources.libraries.python.InterfaceUtil | ... | WITH NAME | interfaceCLI | Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords | ... | WITH NAME | InterfaceAPI *** Keywords *** | Interface state is | | [Documentation] | Uses VPP binary API to ensure that the interface under\ | | ... | test is in the specified admin state. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - state - state to set on interface. Type:string | | ... | | ... | *Example:* | | ... | | ... | \| Interface state is \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \ | | ... | \| up \| | | [Arguments] | ${node} | ${interface} | ${state} | | interfaceCLI.Set interface state | ${node} | ${interface} | ${state} | | ... | if_type=name | Honeycomb sets interface state | | [Documentation] | Uses Honeycomb API to change the admin state\ | | ... | of the specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - state - state to set on interface. Type:string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface state \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| up \| | | [Arguments] | ${node} | ${interface} | ${state} | | interfaceAPI.Set interface state | ${node} | ${interface} | ${state} | Interface state from Honeycomb should be | | [Documentation] | Retrieves interface admin state through Honeycomb and\ | | ... | compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - state - expected interface state. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Interface state from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| up \| | | [Arguments] | ${node} | ${interface} | ${state} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | ${api_state}= | Set Variable | ${api_data['admin-status']} | | Should be equal | ${api_state} | ${state} | Interface state from VAT should be | | [Documentation] | Retrieves interface admin state through VAT and compares\ | | ... | with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - state - expected interface state. Type: string | | ... | | ... | _NOTE:_ Vat returns state as int (1/0) instead of string (up/down). | | ... | This keyword also handles translation. | | ... | | ... | *Example:* | | ... | | ... | \| Interface state from VAT should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| up \| | | [Arguments] | ${node} | ${interface} | ${state} | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | ${vat_state}= | Set Variable if | | ... | ${vat_data['admin_up_down']} == 1 | up | down | | Should be equal | ${vat_state} | ${state} | Honeycomb sets interface ipv4 address | | [Documentation] | Uses Honeycomb API to change ipv4 address\ | | ... | of the specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - netmask - subnet mask to set. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface ipv4 address \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${netmask} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${netmask} | Honeycomb sets interface ipv4 address with prefix | | [Documentation] | Uses Honeycomb API to assign an ipv4 address to the\ | | ... | specified interface. Any existing addresses will be removed. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of address network prefix. Type: int | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface ipv4 address with prefix \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 24 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add first ipv4 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | IPv4 address from Honeycomb should be | | [Documentation] | Retrieves interface ipv4 address through Honeycomb\ | | ... | and compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - prefix - prefix length to expect. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 address from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \ | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Should be equal | ${address} | | ... | ${api_data['ietf-ip:ipv4']['address'][0]['ip']} | | Should be equal | ${prefix} | | ... | ${api_data['ietf-ip:ipv4']['address'][0]['prefix-length']} | IPv4 address from VAT should be | | [Documentation] | Retrieves interface ipv4 address through VAT and\ | | ... | compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - netmask - subnet mask to expect. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 address from VAT should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.2 \| 255.255.255.0 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${netmask} | | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv4 | | Should be equal | ${vpp_data[0]['ip']} | ${address} | | Should be equal | ${vpp_data[0]['netmask']} | ${netmask} | Honeycomb removes interface ipv4 addresses | | [Documentation] | Removes all configured ipv4 addresses from the specified\ | | ... | interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb removes interface ipv4 addresses \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | Remove all ipv4 addresses | ${node} | ${interface} | IPv4 address from Honeycomb should be empty | | [Documentation] | Retrieves interface ipv4 configuration through Honeycomb\ | | ... | and expects to find no IPv4 addresses. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 address from Honeycomb should be empty\| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Run keyword and expect error | *KeyError: 'ietf-ip:ipv4' | | ... | Set Variable | ${api_data['ietf-ip:ipv4']['address']} | IPv4 address from VAT should be empty | | [Documentation] | Retrieves interface ipv4 configuration through VAT and\ | | ... | and expects to find no ipv4 addresses. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 config from VAT should be empty \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | Run keyword and expect error | *No JSON object could be decoded* | | ... | InterfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv4 | Honeycomb adds interface ipv4 neighbor | | [Documentation] | Uses Honeycomb API to assign an ipv4 neighbor to the\ | | ... | specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - fib_address - IP address to add to fib table. Type: string | | ... | - fib_mac - MAC address to add to fib table. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds interface ipv4 neighbor \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.3 \| 08:00:27:c0:5d:37 \ | | [Arguments] | ${node} | ${interface} | ${fib_address} | ${fib_mac} | | interfaceAPI.Add ipv4 neighbor | | ... | ${node} | ${interface} | ${fib_address} | ${fib_mac} | IPv4 neighbor from Honeycomb should be | | [Documentation] | Retrieves ipv4 neighbor list through Honeycomb\ | | ... | and compares with neighbor list supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - neighbors - list of ipv4 neighbor dictionaries. Type: list | | ... | | ... | *Example:* | | ... | | ... | \| IPv4 neighbor from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 192.168.0.4 \| 08:00:27:60:26:ab \| | | [Arguments] | ${node} | ${interface} | @{neighbors} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | ${data_neighbors}= | Set Variable | ${api_data['ietf-ip:ipv4']['neighbor']} | | Compare data structures | | ... | ${data_neighbors} | ${neighbors} | list_order=${False} | | Should be equal | ${neighbor['fib_address']} | | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['ip']} | | Should be equal | ${neighbor['fib_mac']} | | ... | ${api_data['ietf-ip:ipv4']['neighbor'][0]['link-layer-address']} | Honeycomb clears all interface ipv4 neighbors | | [Documentation] | Uses Honeycomb API to assign an ipv4 neighbor to the\ | | ... | specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb clears all interface ipv4 neighbors \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| | | [Arguments] | ${node} | ${interface} | | interfaceAPI.clear all ipv4 neighbors | ${node} | ${interface} | Honeycomb sets interface ipv6 address | | [Documentation] | Uses Honeycomb API to change ipv6 address\ | | ... | of the specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to set. Type: string | | ... | - prefix - length of subnet prefix to set. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface ipv6 address \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | interfaceAPI.Add first ipv6 address | | ... | ${node} | ${interface} | ${address} | ${prefix} | IPv6 address from Honeycomb should be | | [Documentation] | Retrieves interface ipv6 address through Honeycomb\ | | ... | and compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - prefix - length of subnet prefix to expect. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv6 address from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Should be equal | ${address} | | ... | ${api_data['ietf-ip:ipv6']['address'][0]['ip']} | | Should be equal | ${prefix} | | ... | ${api_data['ietf-ip:ipv6']['address'][0]['prefix-length']} | | Should be equal | ${fib_address} | IPv6 address from VAT should be | | [Documentation] | Retrieves interface ipv6 address through VAT and\ | | ... | compares with state supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - address - IP address to expect. Type: string | | ... | - prefix - length of subnet prefix to expect. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| IPv6 address from VAT should be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| 10::10 \| 64 \| | | [Arguments] | ${node} | ${interface} | ${address} | ${prefix} | | ${vpp_data}= | interfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${interface} | ipv6 | | Should be equal | ${vpp_data[0]['ip']} | ${address} | | Should be equal | ${vpp_data[0]['prefix-length']} | ${prefix} | Honeycomb sets interface ethernet and routing configuration | | [Documentation] | Uses Honeycomb API to change interface configuration. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - ethernet - interface ethernet settings. Type: dictionary | | ... | - routing - interface routing settings. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb sets interface ethernet and routing configuration \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${{'mtu': 1500}} \ | | ... | \| ${{'vrf-if': 2}} \| | | [Arguments] | ${node} | ${interface} | ${ethernet} | ${routing} | | :FOR | ${key} | IN | @{ethernet.keys()} | | | interfaceAPI.Configure interface ethernet | | | ... | ${node} | ${interface} | ${key} | ${ethernet['${key}']} | | :FOR | ${key} | IN | @{routing.keys()} | | | interfaceAPI.Configure interface routing | | | ... | ${node} | ${interface} | ${key} | ${routing['${key}']} | Interface ethernet and routing configuration from Honeycomb should be | | [Documentation] | Retrieves interface routing and ethernet configuration\ | | ... | through Honeycomb and compares with settings supplied in arguments. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - ethernet - interface ethernet settings. Type: dictionary | | ... | - routing - interface routing settings. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Interface ethernet and routing configuration from Honeycomb \ | | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \ | | ... | \| ${{'mtu': 1500}} \| ${{'vrf-id': 2}} \| | | [Arguments] | ${node} | ${interface} | ${ethernet} | ${routing} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | :FOR | ${key} | IN | @{ethernet.keys()} | | | Should be equal | | | ... | ${api_data['v3po:ethernet']['${key}']} | ${ethernet['${key}']} | | :FOR | ${key} | IN | @{routing.keys()} | | | Should be equal | ${api_data['${key}']} | ${routing['${key}']} | Interface ethernet and routing configuration from VAT should be | | [Documentation] | Retrieves interface routing and ethernet configuration\ | | ... | through VAT and compares with settings supplied in arguments. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of an interface on the specified node. Type: string | | ... | - mtu - value of maximum transmission unit expected. Type: integer | | ... | - vrf-id - ID number of a VPN expected on interface. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Interface ethernet and routing configuration from VAT \ | | ... | should be \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1500} \ | | ... | \| ${2} \| | | [Arguments] | ${node} | ${interface} | ${mtu} | ${vrf-id} | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | Should be equal | ${vat_data['mtu']} | ${mtu} | Interface configuration from Honeycomb should be empty | | [Documentation] | Attempts to retrieve interface configuration through\ | | ... | Honeycomb and expects to get empty dictionary. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of a interface on the specified node. Type:\ | | ... | string | | ... | | ... | *Example:* | | ... | \| Interface configuration from Honeycomb should be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| | | ... | | [Arguments] | ${node} | ${interface} | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Should be empty | ${api_data} | Interface configuration from VAT should be empty | | [Documentation] | Attempts to retrieve Interface configuration through\ | | ... | VAT and expects to get empty dictionary. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of a Interface on the specified node. Type:\ | | ... | string | | ... | | ... | *Example:* | | ... | \| Interface configuration from VAT should be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| | | ... | | [Arguments] | ${node} | ${interface} | | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | Should be empty | ${vat_data} | Interface indices from Honeycomb and VAT should correspond | | [Documentation] | Uses VAT and Honeycomb to get operational data about the\ | | ... | given interface and compares the interface indexes. The interface | | ... | index from Honeycomb should be greater than index from VAT by one. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of the interface to be checked. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Interface indices from Honeycomb and VAT should correspond \ | | ... | \| ${nodes['DUT1']} \| vxlan_gpe_tunnel0 \| | | ... | | [Arguments] | ${node} | ${interface} | | ... | | ${api_data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | ${sw_if_index}= | EVALUATE | ${vat_data['sw_if_index']} + 1 | | Should be equal as strings | | ... | ${api_data['if-index']} | ${sw_if_index} | Get Interface index from oper data | | [Documentation] | Retrieves interface operational data and returns\ | | ... | if-index of the specified interface. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of the interface. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Get Interface index from oper data \| ${nodes['DUT1']} \| local0 \| | | [Arguments] | ${node} | ${interface} | | ${data}= | interfaceAPI.Get interface oper data | ${node} | ${interface} | | Return from keyword | ${data['if-index']} | Honeycomb should show disabled interface in oper data | | [Documentation] | Retrieves list of disabled interfaces\ | | ... | and verifies that there is at least one. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - index - index of the interface to be checked. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb should show disabled interface in oper data \ | | ... | \|${nodes['DUT1']} \| ${vx_interface} \| | | [Arguments] | ${node} | ${index} | | interfaceAPI.check disabled interface | ${node} | ${index} | Honeycomb should not show disabled interface in oper data | | [Documentation] | Retrieves list of disabled interfaces\ | | ... | and expects to fail with a 404 - not found. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - index - index of the interface to be checked. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb should not show disabled interface in oper data \ | | ... | \|${nodes['DUT1']} \| ${vx_interface} \| | | [Arguments] | ${node} | ${index} | | Run keyword and expect error | * | | ... | Honeycomb should show disabled interface in oper data | | ... | ${node} | ${index}