# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Library | resources.libraries.python.honeycomb.Lisp.LispKeywords | Library | resources.libraries.python.LispUtil | Documentation | Keywords used to test Honeycomb Lisp features. *** Keywords *** | Honeycomb enables LISP | | [Documentation] | Uses Honeycomb API to enable Lisp. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb enables LISP \| ${nodes['DUT1']} \| | | ... | | [Arguments] | ${node} | | ... | | Set Lisp state | ${node} | ${TRUE} | Honeycomb disables LISP | | [Documentation] | Uses Honeycomb API to disable Lisp. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb disables LISP \| ${nodes['DUT1']} \| | | ... | | [Arguments] | ${node} | | ... | | Set Lisp state | ${node} | ${FALSE} | Honeycomb adds locator set | | [Documentation] | Uses Honeycomb API to enable Lisp. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - interface - Name of an interface on the node. Type: string | | ... | - locator_set - Name for the new locator set. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds locator set \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| loc_01 \| | | ... | | [Arguments] | ${node} | ${interface} | ${locator_set} | | ... | | Add locator | ${node} | ${interface} | ${locator_set} | Honeycomb adds Lisp Mapping | | [Documentation] | Uses Honeycomb API to configure a Lisp mapping. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - data - Lisp settings to use. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds Lisp Mapping \| ${nodes['DUT1']} \| ${data} \| | | ... | | [Arguments] | ${node} | ${data} | | ... | | Configure Lisp Mapping | ${node} | ${data} | Honeycomb removes all LISP mappings | | [Documentation] | Uses Honeycomb API to clear the eid-table. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb removes all LISP mappings \| ${nodes['DUT1']} \| | | ... | | [Arguments] | ${node} | | ... | | Configure lisp mapping | ${node} | ${NONE} | LISP should not be configured | | [Documentation] | Retrieves Lisp configuration from Honeycomb operational\ | | ... | data, and expects an empty dictionary. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| LISP should not be configured \| ${nodes['DUT1']} \| | | ... | | [Arguments] | ${node} | | ... | | Run keyword and Expect Error | KeyError: 'lisp-feature-data' | | ... | Get Lisp operational data | ${node} | LISP state from Honeycomb should be | | [Documentation] | Retrieves Lisp state from Honeycomb operational\ | | ... | data, and compares Lisp state with expected value. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - state - Expected Lisp state. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| LISP state from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| enabled \| | | ... | | [Arguments] | ${node} | ${state} | | ${data}= | Get Lisp operational data | ${node} | | ... | | Run keyword if | $state == 'enabled' | | ... | Should be equal as strings | | ... | ${data['lisp-state']['enable']} | ${True} | | Run keyword if | $state == 'disabled' | | ... | Should be equal as strings | | ... | ${data['lisp-state']['enable']} | ${False} | LISP state from VAT should be | | [Documentation] | Retrieves Lisp state from VAT,\ | | ... | and compares Lisp state with expected value. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - state - Expected Lisp state. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| LISP state from VAT should be \| ${nodes['DUT1']} \| enabled \| | | ... | | [Arguments] | ${node} | ${state} | | ... | | ${status}= | VPP show Lisp State | ${node} | | Should match | ${status['feature_status']} | ${state} | LISP mapping from Honeycomb should be | | [Documentation] | Retrieves Lisp mapping from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - settings - Expected Lisp mapping data. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| LISP mapping from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| ${settings} \| | | ... | | [Arguments] | ${node} | ${settings} | | ... | | ${data}= | Get Lisp operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['eid-table']['vni-table'][0]} | | Compare data structures | ${data} | ${settings} | LISP mapping from VAT should be | | [Documentation] | Retrieves Lisp mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - settings - Expected Lisp mapping data. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| LISP mapping from VAT should be \| ${nodes['DUT1']} \ | | ... | \| ${settings} \| | | ... | | [Arguments] | ${node} | ${settings} | | ... | | ${data}= | VPP show Lisp eid table | ${node} | | Compare data structures | ${data[0]} | ${settings} | LISP mappings from Honeycomb should not exist | | [Documentation] | Retrieves Lisp mappings from operational\ | | ... | data, and expects to find none. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| LISP mappings from Honeycomb should not exist \ | | ... | \| ${nodes['DUT1']} \| | | ... | | [Arguments] | ${node} | | ... | | ${data}= | Get Lisp operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | Should be empty | ${data['eid-table']['vni-table']} | LISP mappings from VAT should not exist | | [Documentation] | Retrieves Lisp mappings from VAT,\ | | ... | and expects to receive an empty list. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| LISP mappings from VAT should not exist \| ${nodes['DUT1']} \| | | ... | | [Arguments] | ${node} | | ... | | ${data}= | VPP show Lisp eid table | ${node} | | Should be empty | ${data} | Locator set from Honeycomb should be | | [Documentation] | Retrieves Lisp locator set from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - interface - Interface that should be referenced by locator.\ | | ... | Type: dictionary | | ... | - locator_set - Expected locator set name. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Locator set From Honeycomb Should Be \| ${nodes['DUT1']} \ | | ... | \| GigabitEthernet0/8/0 \| loc01 \| | | ... | | [Arguments] | ${node} | ${interface} | ${locator_set} | | ... | | ${data}= | Get Lisp operational data | ${node} | | ${loc_data}= | Set Variable | | ... | ${data['lisp-state']['lisp-feature-data']['locator-sets']} | | Should be equal | | ... | ${loc_data['locator-set'][0]['name']} | | ... | ${locator_set} | | Should be equal | | ... | ${loc_data['locator-set'][0]['interface'][0]['interface-ref']} | | ... | ${interface} | Honeycomb adds LISP adjacency | | [Documentation] | Uses Honeycomb API to configure Lisp adjacency. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - vni - Virtual network identifier number. Type: integer | | ... | - map - Name of an existing remote mapping. Type: string | | ... | - adjacency - Name for the new adjacency. Type: string | | ... | - data - Lisp adjacency settings to use. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds LISP adjacency \| ${nodes['DUT1']} \| ${1} \| map1\ | | ... | \| adj1 \| ${data} \| | | ... | | [Arguments] | ${node} | ${vni} | ${map} | ${adjacency} | ${data} | | ... | | Add Lisp adjacency | | ... | ${node} | ${vni} | ${map} | ${adjacency} | ${data} | Honeycomb adds LISP map resolver | | [Documentation] | Uses Honeycomb API to configure Lisp map resolver. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - ip_address - IP address for the map resolver. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds LISP map resolver \| ${nodes['DUT1']} \ | | ... | \| 192.168.0.2 \| | | ... | | [Arguments] | ${node} | ${ip_address} | | ... | | Add map resolver | ${node} | ${ip_address} | Honeycomb adds Lisp Map register | | [Documentation] | Uses Honeycomb API to configure Lisp map register. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - add_map_register - Set boolean value of map register. Type: bool | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds Lisp Map register \| ${nodes['DUT1']} \ | | ... | \| ${True} \| | | ... | | [Arguments] | ${node} | ${add_map_register} | | ... | | Set Map Register | ${node} | ${add_map_register} | Honeycomb sets Lisp Map request Mode | | [Documentation] | Uses Honeycomb API to configure Lisp map request mode. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - set_map_request - Set boolean value of map request mode. Type: bool | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds Lisp Map Request Mode \| ${nodes['DUT1']} \ | | ... | \| ${True} \| | | ... | | [Arguments] | ${node} | ${set_map_request} | | ... | | Set Map Request Mode | ${node} | ${set_map_request} | Map resolver from Honeycomb should be | | [Documentation] | Retrieves Lisp map resolver from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - ip_address - IP address that should be referenced in map resolver.\ | | ... | Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Map resolver From Honeycomb Should Be \| ${nodes['DUT1']} \ | | ... | \| 192.168.1.2 \| | | ... | | [Arguments] | ${node} | ${ip_address} | | ... | | ${data}= | Get Lisp operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['map-resolvers']['map-resolver'][0]} | | Should be equal | ${data['ip-address']} | ${ip_address} | Map resolver from VAT should be | | [Documentation] | Retrieves Lisp mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - ip_address - IP address that should be referenced in map resolver.\ | | ... | Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Map resolver From VAT Should Be \| ${nodes['DUT1']} \ | | ... | \| 192.168.1.2 \| | | ... | | [Arguments] | ${node} | ${ip_address} | | ... | | ${data}= | Vpp show Lisp map resolver | ${node} | | Should be equal | ${data[0]['map resolver']} | ${ip_address} | Honeycomb adds Lisp Map Server | | [Documentation] | Uses Honeycomb API to configure Lisp Map Server. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - ip_addresses - IP addresses for the Map Server.\ | | ... | Type: any number of strings | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb adds Lisp Map Server \| ${nodes['DUT1']} \ | | ... | \| 192.168.0.2 \| 192.168.0.3 \| | | ... | | [Arguments] | ${node} | @{ip_addresses} | | ... | | Add Map Server | ${node} | @{ip_addresses} | Map Register from Honeycomb should be | | [Documentation] | Retrieves Lisp Map Register from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - state - Desired state - True. Type: bool | | ... | | ... | *Example:* | | ... | | ... | \| Map Register From Honeycomb Should Be \| ${nodes['DUT1']} \ | | ... | \| ${True} \| | | ... | | [Arguments] | ${node} | ${state} | | ... | | ${data}= | Get Lisp operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['map-register']} | | Should be equal | ${data['enabled']} | ${state} | Map Server from Honeycomb should be | | [Documentation] | Retrieves Lisp Map Server from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - ip_addresses - IP addresses that should be referenced\ | | ... | in Map Server. Type: any number of strings | | ... | | ... | *Example:* | | ... | | ... | \| Map Server From Honeycomb Should Be \| ${nodes['DUT1']} \ | | ... | \| 192.168.1.2 \| 192.168.1.7 \| | | ... | | [Arguments] | ${node} | @{ip_addresses} | | ... | | ${data}= | Get Lisp operational data | ${node} | | Verify Map Server Data from Honeycomb | ${data} | ${ip_addresses} | Map Server from VAT should be | | [Documentation] | Retrieves Lisp mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - ip_addresses - IP addresses that should be referenced\ | | ... | in Map Server. Type: any number of strings | | ... | | ... | *Example:* | | ... | | ... | \| Map Server From VAT Should Be \| ${nodes['DUT1']} \ | | ... | \| 192.168.1.2 \| 192.168.1.7 \| | | ... | | [Arguments] | ${node} | @{ip_addresses} | | ... | | ${data}= | Vpp show Lisp Map Server | ${node} | | Verify Map Server Data from VAT | ${data} | ${ip_addresses} | Map Register from VAT should be | | [Documentation] | Retrieves Lisp mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - state - Desired state - "enabled". Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Map Register From VAT Should Be \| ${nodes['DUT1']} \ | | ... | \| enabled \| | | ... | | [Arguments] | ${node} | ${state} | | ... | | ${data}= | Vpp show Lisp Map Register | ${node} | | Should be equal | ${data['state']} | ${state} | Map Request Mode from VAT should be | | [Documentation] | Retrieves Lisp Request Mode from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - destination - Source or Destination in Map\ | | ... | Request Mode. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Map Request Mode From VAT Should Be \| ${nodes['DUT1']} \ | | ... | \| src-dst \| | | ... | | [Arguments] | ${node} | ${destination} | | ... | | ${data}= | Vpp show Lisp Map Request Mode | ${node} | | Should be equal | ${data['map_request_mode']} | ${destination} | Honeycomb enables LISP PITR feature | | [Documentation] | Uses Honeycomb API to configure Lisp PITR feature. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - locator_set - Name of an existing locator set. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb enables LISP PITR feature \| ${nodes['DUT1']} \| loc1 \| | | ... | | [Arguments] | ${node} | ${locator_set} | | ... | | Configure PITR | ${node} | ${locator_set} | Honeycomb enables LISP PETR feature | | [Documentation] | Uses Honeycomb API to configure Lisp PETR feature. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - ip_address - IP address. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb enables LISP PETR feature \| ${nodes['DUT1']}\ | | ... | \| 192.168.0.1 \| | | ... | | [Arguments] | ${node} | ${ip_address} | | ... | | Configure PETR | ${node} | ${ip_address} | Honeycomb enables LISP RLOC feature | | [Documentation] | Uses Honeycomb API to enable the Lisp RLOC feature. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb enables LISP RLOC feature\ | | ... | \| ${nodes['DUT1']} \| | | ... | | [Arguments] | ${node} | | ... | | Set RLOC probe state | ${node} | ${TRUE} | PITR config from Honeycomb should be | | [Documentation] | Retrieves PITR config from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - locator_set - Name of locator set that should be referenced\ | | ... | in PITR config. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| PITR config from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| loc01 \| | | ... | | [Arguments] | ${node} | ${locator_set} | | ... | | ${data}= | Get Lisp operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['pitr-cfg']} | | Should be equal | ${data['locator-set']} | ${locator_set} | PETR configuration from Honeycomb should be | | [Documentation] | Retrieves PETR config from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - ip_address - IP address for PETR config. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| PETR config from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| 192.168.0.1 \| | | ... | | [Arguments] | ${node} | ${ip_address} | | ... | | ${data}= | Get Lisp operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['petr-cfg']['petr-address']} | | Should be equal | ${data} | ${ip_address} | Map Request Mode from Honeycomb should be | | [Documentation] | Retrieves List Map Request Mode from Honeycomb\ | | ... | operational data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - destination - source-destination. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| List Map Request Mode from Honeycomb should be \| ${nodes['DUT1']}\ | | ... | \| 192.168.0.1 \| | | ... | | [Arguments] | ${node} | ${destination} | | ... | | ${data}= | Get Lisp operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['map-request-mode']['mode']} | | Should be equal | ${data} | ${destination} | RLOC probing from Honeycomb should be | | [Documentation] | Retrieves RLOC config from Honeycomb operational\ | | ... | data, and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - state - desired state -True/False. Type: bool | | ... | | ... | *Example:* | | ... | | ... | \| RLOC probing from Honeycomb should be \| ${nodes['DUT1']} \ | | ... | \| ${True} \| | | ... | | [Arguments] | ${node} | ${state} | | ... | | ${data}= | Get Lisp operational data | ${node} | | ${data}= | Set Variable | ${data['lisp-state']['lisp-feature-data']} | | ${data}= | Set Variable | ${data['rloc-probe']['enabled']} | | Should be equal | ${data} | ${state} | PETR configuration from VAT should be | | [Documentation] | Retrieves Lisp mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - state - state of PETR config - enabled/disabled.\ | | ... | Type: string | | ... | | ... | *Example:* | | ... | | ... | \| PETR configuration From VAT Should Be \| ${nodes['DUT1']} \ | | ... | \| enabled \| | | ... | | [Arguments] | ${node} | ${state} | | ... | | ${data}= | Vpp show Lisp PETR config | ${node} | | Should be equal | ${data['status']} | ${state} | RLOC probing from VAT should be | | [Documentation] | Retrieves Lisp mapping from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - state - state of RLOC config - enabled/disabled.\ | | ... | Type: string | | ... | | ... | *Example:* | | ... | | ... | \| RLOC configuration From VAT Should Be \| ${nodes['DUT1']} \ | | ... | \| enabled \| | | ... | | [Arguments] | ${node} | ${state} | | ... | | ${data}= | Vpp show Lisp RLOC config | ${node} | | Should be equal | ${data['state']} | ${state} | PITR config from VAT should be | | [Documentation] | Retrieves PITR config from VAT,\ | | ... | and compares with expected data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - locator_set - Name of locator set that should be referenced\ | | ... | in PITR config. Type: string | | ... | | ... | *Example:* | | ... | | ... | \| PITR config from VAT should be \| ${nodes['DUT1']} \ | | ... | \| loc01 \| | | ... | | [Arguments] | ${node} | ${locator_set} | | ... | | ${data}= | VPP show Lisp PITR | ${node} | | Should be equal | ${data['status']} | enabled | | Should be equal | ${data['locator_set']} | ${locator_set} | Honeycomb disables all LISP features | | [Documentation] | Uses Honeycomb API to remove all Lisp configuration. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | | ... | *Example:* | | ... | | ... | \| Honeycomb disables all LISP features \| ${nodes['DUT1']} \| | | ... | | [Arguments] | ${node} | | ... | | Disable Lisp | ${node}