# Copyright (c) 2016 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Library | resources.libraries.python.InterfaceUtil | ... | WITH NAME | interfaceCLI | Library | resources.libraries.python.L2Util | Library | resources.libraries.python.honeycomb.HcAPIKwInterfaces.InterfaceKeywords | ... | WITH NAME | InterfaceAPI | Resource | resources/libraries/robot/honeycomb/bridge_domain.robot | Documentation | Keywords used to manipulate sub-interfaces. *** Keywords *** | Honeycomb creates sub-interface | | [Documentation] | Create a sub-interface using Honeycomb API. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_interface - Super-interface where a sub-interface will be\ | | ... | created. Type: string | | ... | - match - Match type. Type: string | | ... | - tags - List of tags to be set while creating the sub-interface.\ | | ... | Type: list | | ... | - sub_interface_settings - Sub-inteface parameters to be set while\ | | ... | creating the sub-interface. Type: dictionary | | ... | | ... | *Example:* | | ... | \| Honeycomb creates sub-interface\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0\ | | ... | \| vlan-tagged-exact-match \| ${sub_if_1_tags}\ | | ... | \| ${sub_if_1_settings} \| | | ... | | [Arguments] | ${node} | ${super_interface} | | ... | ${match} | ${tags} | ${sub_interface_settings} | | ... | | interfaceAPI.Create sub interface | ${node} | ${super_interface} | | ... | ${match} | ${tags} | &{sub_interface_settings} | Sub-interface Operational Data From Honeycomb Should Be | | [Documentation] | Retrieves sub-interface configuration through Honeycomb\ | | ... | and compares it with settings supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_interface - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - sub_if_settings - Operational data for sub-interface to be checked.\ | | ... | Type: dictionary | | ... | | ... | *Example:* | | ... | \| Sub-interface Operational Data From Honeycomb Should Be\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\ | | ... | \| ${sub_if_1_params} \| | | ... | | [Arguments] | ${node} | ${super_interface} | ${identifier} | | ... | ${sub_if_settings} | | ... | | ${api_data}= | interfaceAPI.Get sub interface oper data | | ... | ${node} | ${super_interface} | ${identifier} | | interfaceAPI.Compare Data Structures | ${api_data} | ${sub_if_settings} | Sub-interface Operational Data From Honeycomb Should Be empty | | [Documentation] | Retrieves sub-interface configuration through Honeycomb \ | | ... | and expects no data. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_interface - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | \| Sub-interface Operational Data From Honeycomb Should Be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| | | ... | | [Arguments] | ${node} | ${super_interface} | ${identifier} | | ... | | Run keyword and expect error | *KeyError: 'vpp-vlan:sub-interfaces'* | | ... | interfaceAPI.Get sub interface oper data | | ... | ${node} | ${super_interface} | ${identifier} | Sub-interface state from Honeycomb should be | | [Documentation] | Retrieves sub-interface configuration through Honeycomb \ | | ... | and checks the administrative and operational state. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_interface - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - admin_state - Required administrative state - up or down. \ | | ... | Type: string | | ... | - oper_state - Required operational state - up or down. Type: string | | ... | | ... | *Example:* | | ... | \| Sub-interface state from Honeycomb should be\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| up \| up \| | | ... | | [Arguments] | ${node} | ${super_interface} | ${identifier} | | ... | ${admin_state} | ${oper_state} | | ... | | ${api_data}= | interfaceAPI.Get sub interface oper data | | ... | ${node} | ${super_interface} | ${identifier} | | Should be equal | ${api_data['admin-status']} | ${admin_state} | | Should be equal | ${api_data['oper-status']} | ${oper_state} | Sub-interface Operational Data From VAT Should Be | | [Documentation] | Retrieves sub-interface configuration through VAT and\ | | ... | compares it with settings supplied in argument. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - sub_interface - Name of an sub-interface on the specified node.\ | | ... | Type: string | | ... | - sub_interface_settings - Operational data specific for a\ | | ... | sub-interface to be checked. Type: dictionary | | ... | | ... | *Example:* | | ... | \| Sub-interface Operational Data From VAT Should Be\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| ${sub_if_1_params} \| | | ... | | [Arguments] | ${node} | ${sub_interface} | ${sub_interface_settings} | | ... | | ${vat_data}= | InterfaceCLI.VPP get interface data | | ... | ${node} | ${sub_interface} | | Should be equal as strings | ${vat_data['sub_id']} | | ... | ${sub_interface_settings['identifier']} | | Should be equal as strings | | ... | ${vat_data['interface_name']} | ${sub_interface} | | Run keyword if | ${vat_data['link_up_down']} == 0 | | ... | Should be equal as strings | | ... | ${sub_interface_settings['oper-status']} | down | | Run keyword if | ${vat_data['link_up_down']} == 1 | | ... | Should be equal as strings | | ... | ${sub_interface_settings['oper-status']} | up | Sub-interface state from VAT should be | | [Documentation] | Retrieves sub-interface configuration through VAT and \ | | ... | checks the administrative and operational state. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - sub_interface - Name of an sub-interface on the specified node. \ | | ... | Type: string | | ... | - admin_state - Required administrative state - up or down. \ | | ... | Type: string | | ... | - oper_state - Required operational state - up or down. Type: string | | ... | | ... | *Example:* | | ... | \| Sub-interface state from VAT should be \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| up \| up \| | | ... | | [Arguments] | ${node} | ${sub_interface} | ${admin_state} | ${oper_state} | | ... | | ${vat_data}= | InterfaceCLI.VPP get interface data | | ... | ${node} | ${sub_interface} | | Run keyword if | '${admin_state}' == 'down' | | ... | Should be equal as strings | ${vat_data['admin_up_down']} | 0 | | Run keyword if | '${admin_state}' == 'up' | | ... | Should be equal as strings | ${vat_data['admin_up_down']} | 1 | | Run keyword if | '${oper_state}' == 'down' | | ... | Should be equal as strings | ${vat_data['link_up_down']} | 0 | | Run keyword if | '${oper_state}' == 'up' | | ... | Should be equal as strings | ${vat_data['link_up_down']} | 1 | Sub-interface indices from Honeycomb and VAT should correspond | | [Documentation] | Uses VAT and Honeycomb to get operational data about the\ | | ... | given sub-interface and compares the interface indexes. The | | ... | sub-interface index from Honeycomb should be greater than index from | | ... | VAT by one. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_interface - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | | ... | \| Sub-interface indices from Honeycomb and VAT should correspond \ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| | | ... | | [Arguments] | ${node} | ${super_interface} | ${identifier} | | ... | | ${api_data}= | interfaceAPI.Get sub interface oper data | | ... | ${node} | ${super_interface} | ${identifier} | | ${vat_data}= | InterfaceCLI.VPP get interface data | | ... | ${node} | ${super_interface}.${identifier} | | ${sw_if_index}= | EVALUATE | ${vat_data['sw_if_index']} + 1 | | Should be equal as strings | | ... | ${api_data['if-index']} | ${sw_if_index} | Honeycomb sets the sub-interface up | | [Documentation] | Honeycomb sets the sub-interface up. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_interface - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | Honeycomb sets the sub-interface up\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| | | ... | | [Arguments] | ${node} | ${super_interface} | ${identifier} | | ... | | interfaceAPI.Set sub interface state | | ... | ${node} | ${super_interface} | ${identifier} | up | Honeycomb sets the sub-interface down | | [Documentation] | Honeycomb sets the sub-interface down. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_interface - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | Honeycomb sets the sub-interface down\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| | | ... | | [Arguments] | ${node} | ${super_interface} | ${identifier} | | ... | | interfaceAPI.Set sub interface state | | ... | ${node} | ${super_interface} | ${identifier} | down | Honeycomb fails to set sub-interface up | | [Documentation] | Honeycomb tries to set sub-interface up and expects error. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_interface - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | \| Honeycomb fails to set sub-interface up\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| | | ... | | [Arguments] | ${node} | ${super_interface} | ${identifier} | | ... | | Run keyword and expect error | *HoneycombError: * was not successful. * 500. | | ... | interfaceAPI.Set sub interface state | | ... | ${node} | ${super_interface} | ${identifier} | up | Honeycomb adds sub-interface to bridge domain | | [Documentation] | Honeycomb adds the given sub-interface to bridge domain. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - sub_bd_setings - Bridge domain parameters to be set while adding\ | | ... | the sub-interface to the bridge domain. Type: dictionary | | ... | | ... | *Example:* | | ... | \| Honeycomb adds sub-interface to bridge domain\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| ${bd_settings} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${sub_bd_setings} | | ... | | interfaceAPI.Add bridge domain to sub interface | | ... | ${node} | ${super_if} | ${identifier} | ${sub_bd_setings} | Sub-interface bridge domain Operational Data From Honeycomb Should Be | | [Documentation] | Uses Honeycomb API to verify sub-interface assignment to\ | | ... | a bridge domain. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - settings - Bridge domain parameters to be checked. Type: dictionary | | ... | | ... | *Example:* | | ... | \| Sub-interface bridge domain Operational Data From Honeycomb Should Be\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| ${bd_settings} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings} | | ... | | ${if_data}= | interfaceAPI.Get BD data from sub interface | | ... | ${node} | ${super_if} | ${identifier} | | Should be equal | ${if_data['bridge-domain']} | | ... | ${settings['bridge-domain']} | Sub-interface bridge domain Operational Data From VAT Should Be | | [Documentation] | Uses VAT to verify sub-interface assignment to a bridge\ | | ... | domain. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - interface - Name of a sub-interface on the specified node. Type:\ | | ... | string | | ... | - setings - Parameters to be checked. Type: dictionary | | ... | | ... | *Example:* | | ... | \| Sub-interface bridge domain Operational Data From VAT Should Be\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| ${sub_bd_setings} \| | | ... | | [Arguments] | ${node} | ${interface} | ${settings} | | ... | | ${bd_data}= | VPP get bridge domain data | ${node} | | ${bd_intf}= | Set Variable | ${bd_data[0]} | | ${sw_if_data}= | Set Variable | ${bd_intf['sw_if'][0]} | | Should be equal as integers | ${bd_intf['flood']} | ${bd_settings['flood']} | | Should be equal as integers | ${bd_intf['forward']} | | ... | ${bd_settings['forward']} | | Should be equal as integers | ${bd_intf['learn']} | ${bd_settings['learn']} | | Should be equal as strings | ${sw_if_data['shg']} | | ... | ${settings['split-horizon-group']} | Honeycomb fails to remove all sub-interfaces | | [Documentation] | Honeycomb tries to remove all sub-interfaces using\ | | ... | Honeycomb API. This operation must fail. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | | ... | *Example:* | | ... | \| Honeycomb fails to remove all sub-interfaces\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| | | ... | | [Arguments] | ${node} | ${super_if} | | ... | | Run keyword and expect error | *HoneycombError:*not successful. * code: 500. | | ... | interfaceAPI.Remove all sub interfaces | | ... | ${node} | ${super_if} | Honeycomb configures tag rewrite | | [Documentation] | Honeycomb configures tag-rewrite | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - settings - tag-rewrite parameters. Type: dictionary. | | ... | | ... | *Example:* | | ... | \| Honeycomb configures tag rewrite\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\ | | ... | \| ${tag_rewrite_push} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings} | | ... | | interfaceAPI.Configure tag rewrite | | ... | ${node} | ${super_if} | ${identifier} | ${settings} | Rewrite tag from Honeycomb should be empty | | [Documentation] | Checks if the tag-rewrite is empty or does not exist. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | \| Rewrite tag from Honeycomb should be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1 \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | | ... | | Run keyword and expect error | *Hon*Error*oper*does not contain*tag-rewrite* | | ... | interfaceAPI.Get tag rewrite oper data | | ... | ${node} | ${super_if} | ${identifier} | Rewrite tag from Honeycomb should be | | [Documentation] | Checks if the operational data retrieved from Honeycomb\ | | ... | are as expected. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - settings - tag-rewrite operational parameters to be checked.\ | | ... | Type: dictionary. | | ... | | ... | *Example:* | | ... | \| Rewrite tag from Honeycomb should be\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\ | | ... | \| ${tag_rewrite_push_oper} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings} | | ${api_data}= | interfaceAPI.Get tag rewrite oper data | | ... | ${node} | ${super_if} | ${identifier} | | interfaceAPI.Compare Data Structures | | ... | ${api_data} | ${settings} | Rewrite tag from VAT should be | | [Documentation] | Retrieves sub-interface configuration through VAT and\ | | ... | compares values of rewrite tag parameters with settings supplied in\ | | ... | argument. | | ... | | ... | *Arguments:* | | ... | - node - information about a DUT node. Type: dictionary | | ... | - interface - name of a sub-interface on the specified node.\ | | ... | Type: string | | ... | - rw_settings - Parameters to be set while setting the rewrite tag.\ | | ... | Type: dictionary | | ... | | ... | *Example:* | | ... | \| Rewrite tag from VAT should be\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| ${rw_params} \| | | ... | | [Arguments] | ${node} | ${interface} | ${rw_settings} | | ${vat_data}= | InterfaceCLI.VPP get interface data | ${node} | ${interface} | | interfaceAPI.Compare Data Structures | ${vat_data} | ${rw_settings} | Honeycomb fails to set wrong rewrite tag | | [Documentation] | Honeycomb tries to set wrong rewrite tag and expects\ | | ... | an error. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - settings - tag-rewrite parameters. Type: dictionary. | | ... | | ... | *Example:* | | ... | \| Honeycomb fails to set wrong rewrite tag\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| 1\ | | ... | \| ${tag_rewrite_push_WRONG} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${settings} | | Run keyword and expect error | *HoneycombError: * was not successful. *00. | | ... | interfaceAPI.Configure tag rewrite | | ... | ${node} | ${super_if} | ${identifier} | ${settings} | Honeycomb sets sub-interface ipv4 address | | [Documentation] | Uses Honeycomb API to configure an ipv4 address on the\ | | ... | spcified sub-interface. Replaces any existing ipv4 addresses. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - address - IPv4 address to set. Type: string | | ... | - prefix - IPv4 network prefix length to set. Type: integer | | ... | | ... | *Example:* | | ... | \| | Honeycomb sets sub-interface ipv4 address\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ | | ... | \| 192.168.0.2 \| ${24} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | | Add ip address to sub_interface | | ... | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | ipv4 | Sub-interface ipv4 address from Honeycomb should be | | [Documentation] | Uses Honeycomb API to verify ipv4 address configuration\ | | ... | on the specified sub-interface. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - address - IPv4 address to expect. Type: string | | ... | - prefix - IPv4 network prefix length to expect. Type: integer | | ... | | ... | *Example:* | | ... | \| sub-interface ipv4 address from Honeycomb should be\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ | | ... | \| 192.168.0.2 \| ${24} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | | ${if_data}= | interfaceAPI.Get sub interface oper data | | ... | ${node} | ${super_if} | ${identifier} | | Should be equal | | ... | ${if_data['ipv4']['address'][0]['ip']} | ${address} | | Should be equal | | ... | ${if_data['ipv4']['address'][0]['prefix-length']} | ${prefix} | Sub-interface ipv4 address from VAT should be | | [Documentation] | Uses VAT to verify ipv4 address configuration\ | | ... | on the specified sub-interface. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - sub_interface - Name of an sub-interface on the specified node.\ | | ... | Type: string | | ... | - address - IPv4 address to expect. Type: string | | ... | - prefix - IPv4 network prefix length to expect. Type: integer | | ... | | ... | *Example:* | | ... | \| sub-interface ipv4 address from VAT should be\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| | | ... | | [Arguments] | ${node} | ${sub_interface} | ${address} | ${prefix} | | ${data}= | interfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${sub_interface} | ipv4 | | Should be equal | ${data[0]['ip']} | ${address} | | Should be equal | ${data[0]['prefix_length']} | ${prefix} | Honeycomb removes all sub-interface ipv4 addresses | | [Documentation] | Uses Honeycomb API to remove all configured ipv4\ | | ... | addresses from the sub-interface. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | \| Honeycomb removes all sub-interface ipv4 addresses\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | | Remove all ip addresses from sub_interface | | ... | ${node} | ${super_if} | ${identifier} | ipv4 | Sub-interface ipv4 address from Honeycomb should be empty | | [Documentation] | Uses Honeycomb API to verify that ipv4 address\ | | ... | configuration on the specified sub-interface is empty. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | \| sub-interface ipv4 address from Honeycomb should be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | | ${if_data}= | interfaceAPI.Get sub interface oper data | | ... | ${node} | ${super_if} | ${identifier} | | Run keyword and expect error | *KeyError: 'ipv4'* | | ... | Set Variable | ${if_data['ipv4']['address'][0]['ip']} | Sub-interface ipv4 address from VAT should be empty | | [Documentation] | Uses VAT to verify that ipv4 address\ | | ... | configuration on the specified sub-interface is empty. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - sub_interface - Name of an sub-interface on the specified node.\ | | ... | Type: string | | ... | | ... | *Example:* | | ... | \| sub-interface ipv4 address from VAT should be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| | | ... | | [Arguments] | ${node} | ${sub_interface} | | Run keyword and expect error | *No JSON object could be decoded* | | ... | interfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${sub_interface} | ipv4 | Honeycomb sets sub-interface ipv6 address | | [Documentation] | Uses Honeycomb API to configure an ipv6 address on the\ | | ... | spcified sub-interface. Replaces any existing ipv6 addresses. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - address - IPv6 address to set. Type: string | | ... | - prefix - IPv6 network prefix length to set. Type: integer | | ... | | ... | *Example:* | | ... | \| | Honeycomb sets sub-interface ipv6 address\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ | | ... | \| 10::10 \| ${64} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | | Add ip address to sub_interface | | ... | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | ipv6 | Sub-interface IPv6 address from Honeycomb should contain | | [Documentation] | Uses Honeycomb API to verify ipv6 address configuration\ | | ... | on the specified sub-interface. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | - address - IPv6 address to expect. Type: string | | ... | - prefix - IPv6 network prefix length to expect. Type: integer | | ... | | ... | *Example:* | | ... | \| sub-interface IPv6 address from Honeycomb should contain\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \ | | ... | \| 10::10 \| ${64} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | ${address} | ${prefix} | | ${if_data}= | interfaceAPI.Get sub interface oper data | | ... | ${node} | ${super_if} | ${identifier} | | ${settings}= | Create Dictionary | | ... | ip=${address} | prefix-length=${prefix} | | Should contain | ${if_data['ipv6']['address']} | ${settings} | Sub-interface IPv6 address from VAT should contain | | [Documentation] | Uses VAT to verify ipv6 address configuration\ | | ... | on the specified sub-interface. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - sub_interface - Name of an sub-interface on the specified node.\ | | ... | Type: string | | ... | - address - IPv6 address to expect. Type: string | | ... | - prefix - IPv6 network prefix length to expect. Type: integer | | ... | | ... | *Example:* | | ... | \| sub-interface IPv6 address from VAT should contain\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| | | ... | | [Arguments] | ${node} | ${sub_interface} | ${address} | ${prefix} | | ${data}= | interfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${sub_interface} | ipv6 | | Should be equal | ${data[0]['ip']} | ${address} | | Should be equal | ${data[0]['prefix_length']} | ${prefix} | Honeycomb removes all sub-interface ipv6 addresses | | [Documentation] | Uses Honeycomb API to remove all configured ipv6\ | | ... | addresses from the sub-interface. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | \| Honeycomb removes all sub-interface ipv6 addresses\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | | Remove all ip addresses from sub_interface | | ... | ${node} | ${super_if} | ${identifier} | ipv6 | Sub-interface ipv6 address from Honeycomb should be empty | | [Documentation] | Uses Honeycomb API to verify that ipv6 address\ | | ... | configuration on the specified sub-interface is empty. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - super_if - Super-interface. Type: string | | ... | - identifier - Sub-interface ID. Type: integer or string | | ... | | ... | *Example:* | | ... | \| sub-interface ipv6 address from Honeycomb should be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0 \| ${1} \| | | ... | | [Arguments] | ${node} | ${super_if} | ${identifier} | | ${if_data}= | interfaceAPI.Get sub interface oper data | | ... | ${node} | ${super_if} | ${identifier} | | Run keyword and expect error | *KeyError: 'ipv6'* | | ... | Set Variable | ${if_data['ipv6']['address'][0]['ip']} | Sub-interface ipv6 address from VAT should be empty | | [Documentation] | Uses VAT to verify that ipv6 address\ | | ... | configuration on the specified sub-interface is empty. | | ... | | ... | *Arguments:* | | ... | - node - Information about a DUT node. Type: dictionary | | ... | - sub_interface - Name of an sub-interface on the specified node.\ | | ... | Type: string | | ... | | ... | *Example:* | | ... | \| sub-interface ipv6 address from VAT should be empty\ | | ... | \| ${nodes['DUT1']} \| GigabitEthernet0/8/0.1 \| | | ... | | [Arguments] | ${node} | ${sub_interface} | | Run keyword and expect error | *No JSON object could be decoded* | | ... | interfaceCLI.VPP get interface ip addresses | | ... | ${node} | ${sub_interface} | ipv6