# Copyright (c) 2018 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.IPv4Util.IPv4Util | Library | resources.libraries.python.IPv4Setup.IPv4Setup | Library | resources.libraries.python.NodePath | Library | resources.libraries.python.Routing | Library | resources.libraries.python.TrafficScriptExecutor | Resource | resources/libraries/robot/shared/counters.robot | Resource | resources/libraries/robot/shared/default.robot | Resource | resources/libraries/robot/shared/testing_path.robot | Variables | resources/libraries/python/IPv4NodeAddress.py | ${nodes} | ... | Documentation | IPv4 keywords *** Keywords *** | Show IP FIB On All DUTs | | [Documentation] | Show IP FIB on all DUTs. | | ... | | ${duts}= | Get Matches | ${nodes} | DUT* | | :FOR | ${dut} | IN | @{duts} | | | VPP Show IP Table | ${nodes['${dut}']} | Configure IPv4 addresses on all DUTs | | [Documentation] | Setup IPv4 address on all DUTs in topology | | [Arguments] | ${nodes} | ${nodes_addr} | | ${interfaces}= | VPP nodes set ipv4 addresses | ${nodes} | ${nodes_addr} | | :FOR | ${interface} | IN | @{interfaces} | | | Set Interface State | @{interface} | up | if_type=name | Configure routes for IPv4 test | | [Documentation] | Setup routing on all VPP nodes required for IPv4 tests | | [Arguments] | ${nodes} | ${nodes_addr} | | Append Nodes | ${nodes['DUT1']} | ${nodes['DUT2']} | | Compute Path | | ${tg}= | Set Variable | ${nodes['TG']} | | ${dut1_if} | ${dut1}= | First Interface | | ${dut2_if} | ${dut2}= | Last Interface | | ${dut1_if_addr}= | Get IPv4 address of node "${dut1}" interface "${dut1_if}" from "${nodes_addr}" | | ${dut2_if_addr}= | Get IPv4 address of node "${dut2}" interface "${dut2_if}" from "${nodes_addr}" | | @{tg_dut1_links}= | Get active links connecting "${tg}" and "${dut1}" | | @{tg_dut2_links}= | Get active links connecting "${tg}" and "${dut2}" | | :FOR | ${link} | IN | @{tg_dut1_links} | | | ${net}= | Get Link Address | ${link} | ${nodes_addr} | | | ${prefix}= | Get Link Prefix | ${link} | ${nodes_addr} | | | Vpp Route Add | ${dut2} | ${net} | ${prefix} | ${dut1_if_addr} | | | ... | ${dut2_if} | | :FOR | ${link} | IN | @{tg_dut2_links} | | | ${net}= | Get Link Address | ${link} | ${nodes_addr} | | | ${prefix}= | Get Link Prefix | ${link} | ${nodes_addr} | | | Vpp Route Add | ${dut1} | ${net} | ${prefix} | ${dut2_if_addr} | | | ... | ${dut1_if} | Configure DUT nodes for IPv4 testing | | Configure IPv4 addresses on all DUTs | ${nodes} | ${nodes_ipv4_addr} | | Setup ARP on all DUTs | ${nodes} | ${nodes_ipv4_addr} | | Configure routes for IPv4 test | ${nodes} | ${nodes_ipv4_addr} | | All Vpp Interfaces Ready Wait | ${nodes} | Route traffic from interface '${from_port}' on node '${from_node}' to interface '${to_port}' on node '${to_node}' '${hops}' hops away using IPv4 | | ${src_ip}= | Get IPv4 address of node "${from_node}" interface "${from_port}" from "${nodes_ipv4_addr}" | | ${dst_ip}= | Get IPv4 address of node "${to_node}" interface "${to_port}" from "${nodes_ipv4_addr}" | | ${src_mac}= | Get interface mac | ${from_node} | ${from_port} | | ${dst_mac}= | Get interface mac | ${to_node} | ${to_port} | | ${is_dst_tg}= | Is TG node | ${to_node} | | ${adj_node} | ${adj_int}= | Get adjacent node and interface | ${nodes} | | ... | ${from_node} | ${from_port} | | ${from_port_name}= | Get interface name | ${from_node} | ${from_port} | | ${to_port_name}= | Get interface name | ${to_node} | ${to_port} | | ${adj_int_mac}= | Get interface MAC | ${adj_node} | ${adj_int} | | ${args}= | Traffic Script Gen Arg | ${to_port_name} | ${from_port_name} | | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip} | | ${args}= | Catenate | ${args} | --hops ${hops} | | ... | --first_hop_mac ${adj_int_mac} | --is_dst_tg ${is_dst_tg} | | Run Traffic Script On Node | ipv4_ping_ttl_check.py | ${from_node} | ${args} | Execute IPv4 ICMP echo sweep | | [Documentation] | Type of the src_node must be TG and dst_node must be DUT | | [Arguments] | ${src_node} | ${dst_node} | ${start_size} | ${end_size} | | ... | ${step} | | Append Nodes | ${src_node} | ${dst_node} | | Compute Path | | ${src_port} | ${src_node}= | First Interface | | ${dst_port} | ${dst_node}= | Last Interface | | ${src_ip}= | Get IPv4 address of node "${src_node}" interface "${src_port}" from "${nodes_ipv4_addr}" | | ${dst_ip}= | Get IPv4 address of node "${dst_node}" interface "${dst_port}" from "${nodes_ipv4_addr}" | | ${src_mac}= | Get Interface Mac | ${src_node} | ${src_port} | | ${dst_mac}= | Get Interface Mac | ${dst_node} | ${dst_port} | | ${src_port_name}= | Get interface name | ${src_node} | ${src_port} | | ${args}= | Traffic Script Gen Arg | ${src_port_name} | ${src_port_name} | | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip} | | ${args}= | Catenate | ${args} | --start_size ${start_size} | | ... | --end_size ${end_size} | --step ${step} | | Run Traffic Script On Node | ipv4_sweep_ping.py | ${src_node} | ${args} | | ... | timeout=${180} | Send ARP request and verify response | | [Arguments] | ${tg_node} | ${vpp_node} | | ${link_name}= | Get first active connecting link between node "${tg_node}" and "${vpp_node}" | | ${src_if}= | Get interface by link name | ${tg_node} | ${link_name} | | ${dst_if}= | Get interface by link name | ${vpp_node} | ${link_name} | | ${src_ip}= | Get IPv4 address of node "${tg_node}" interface "${src_if}" from "${nodes_ipv4_addr}" | | ${dst_ip}= | Get IPv4 address of node "${vpp_node}" interface "${dst_if}" from "${nodes_ipv4_addr}" | | ${src_mac}= | Get node link mac | ${tg_node} | ${link_name} | | ${dst_mac}= | Get node link mac | ${vpp_node} | ${link_name} | | ${src_if_name}= | Get interface name | ${tg_node} | ${src_if} | | ${args}= | Traffic Script Gen Arg | ${src_if_name} | ${src_if_name} | | ... | ${src_mac} | ${dst_mac} | ${src_ip} | ${dst_ip} | | Run Traffic Script On Node | arp_request.py | ${tg_node} | ${args} | Configure IP addresses on interfaces | | [Documentation] | Iterates through @{args} list and Set Interface Address | | ... | for every (${dut_node}, ${interface}, ${address}, | | ... | ${prefix}) tuple. | | ... | | ... | *Arguments:* | | ... | - dut_node - Node where IP address should be set to. | | ... | Type: dictionary | | ... | - interface - Interface name. Type: string | | ... | - address - IP address. Type: string | | ... | - prefix - Prefix length. Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Configure IP addresses on interfaces \ | | ... | \| ${dut1_node} \| ${dut1_to_dut2} \| 192.168.1.1 \| 24 \| | | ... | \| ... \| ${dut1_node} \| ${dut1_to_tg} \| 192.168.2.1 \| 24 \| | | ... | | [Arguments] | @{args} | | :FOR | ${dut_node} | ${interface} | ${address} | ${prefix} | IN | @{args} | | | Set Interface Address | ${dut_node} | ${interface} | ${address} | | | ... | ${prefix} | Send ICMP echo request and verify answer | | [Documentation] | Run traffic script that waits for ICMP reply and ignores | | ... | all other packets. | | ... | | ... | *Arguments:* | | ... | - tg_node - TG node where run traffic script. Type: dictionary | | ... | - tg_interface - TG interface where send ICMP echo request. | | ... | Type: string | | ... | - dst_mac - Destination MAC address. Type: string | | ... | - src_mac - Source MAC address. Type: string | | ... | - dst_ip - Destination IP address. Type: string | | ... | - src_ip - Source IP address. Type: string | | ... | - timeout - Wait timeout in seconds (Default: 10). Type: integer | | ... | | ... | *Example:* | | ... | | ... | \| Send ICMP echo request and verify answer \ | | ... | \| ${nodes['TG']} \| eth2 \ | | ... | \| 08:00:27:46:2b:4c \| 08:00:27:66:b8:57 \ | | ... | \| 192.168.23.10 \| 192.168.23.1 \| 10 \| | | ... | | [Arguments] | ${tg_node} | ${tg_interface} | | ... | ${dst_mac} | ${src_mac} | ${dst_ip} | ${src_ip} | ${timeout}=${10} | | ... | | ${tg_interface_name}= | Get interface name | ${tg_node} | ${tg_interface} | | ${args}= | Catenate | --rx_if ${tg_interface_name} | | ... | --tx_if ${tg_interface_name} | --dst_mac ${dst_mac} | | ... | --src_mac ${src_mac} | --dst_ip ${dst_ip} | --src_ip ${src_ip} | | ... | --timeout ${timeout} | | Run Traffic Script On Node | send_icmp_wait_for_reply.py | | ... | ${tg_node} | ${args} | Configure IPv4 forwarding in circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 2-node / 3-node | | ... | circular topology. Get the interface MAC addresses and setup ARP on | | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG | | ... | links. In case of 3-node topology setup IPv4 adresses with /30 prefix | | ... | on DUT1-DUT2 link and set routing on both DUT nodes with prefix /24 | | ... | and next hop of neighbour DUT interface IPv4 address. Configure route | | ... | entries for remote hosts IPv4 addresses if required. | | ... | | ... | *Arguments:* | | ... | - tg_if1_ip4 - IP address of TG interface1. Type: string | | ... | - tg_if2_ip4 - IP address of TG interface2. Type: string | | ... | - dut1_if1_ip4 - IP address of DUT1 interface1. Type: string | | ... | - dut1_if2_ip4 - IP address of DUT1 interface1. Type: string | | ... | - dut2_if1_ip4 - IP address of DUT2 interface1 (Optional). | | ... | Type: string | | ... | - dut2_if2_ip4 - IP address of DUT2 interface2 (Optional). | | ... | Type: string | | ... | - remote_host1_ip4 - IP address of remote host1 (Optional). | | ... | Type: string | | ... | - remote_host2_ip4 - IP address of remote host2 (Optional). | | ... | Type: string | | ... | - remote_host_ip4_prefix - IP address prefix for host IP addresses | | ... | (Optional). Type: string or integer | | ... | | ... | *Example:* | | ... | | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 20.20.20.1 \| | | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 20.20.20.1 \ | | ... | \| remote_host1_ip4=192.168.0.1 \| remote_host2_ip4=192.168.0.2 \ | | ... | \| remote_host_ip4_prefix=32 \| | | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 1.1.1.1 \| 1.1.1.2 \ | | ... | \| 20.20.20.1 \| | | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 1.1.1.1 \| 1.1.1.2 \ | | ... | \| 20.20.20.1 \| remote_host1_ip4=192.168.0.1 \ | | ... | \| remote_host2_ip4=192.168.0.2 \| remote_host_ip4_prefix=32 \| | | ... | | [Arguments] | ${tg_if1_ip4} | ${tg_if2_ip4} | ${dut1_if1_ip4} | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4}=${NONE} | ${dut2_if2_ip4}=${NONE} | | ... | ${remote_host1_ip4}=${NONE} | ${remote_host2_ip4}=${NONE} | | ... | ${remote_host_ip4_prefix}=${NONE} | | ... | | Configure interfaces in path up | | ... | | ${dut2_status} | ${value}= | Run Keyword And Ignore Error | | ... | Variable Should Exist | ${dut2_node} | | ... | | Run Keyword If | '${dut2_status}' == 'PASS' | | ... | Configure IPv4 forwarding in 3-node circular topology | | ... | ${tg_if1_ip4} | ${tg_if2_ip4} | ${dut1_if1_ip4} | ${dut1_if2_ip4} | | ... | ${dut2_if1_ip4} | ${dut2_if2_ip4} | ${remote_host1_ip4} | | ... | ${remote_host2_ip4} | ${remote_host_ip4_prefix} | | ... | ELSE | | ... | Configure IPv4 forwarding in 2-node circular topology | | ... | ${tg_if1_ip4} | ${tg_if2_ip4} | ${dut1_if1_ip4} | ${dut1_if2_ip4} | | ... | remote_host1_ip4=${remote_host1_ip4} | | ... | remote_host2_ip4=${remote_host2_ip4} | | ... | remote_host_ip4_prefix=${remote_host_ip4_prefix} | Configure IPv4 forwarding in 2-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces on DUT node in 2-node circular | | ... | topology. Get the interface MAC addresses and setup ARP on | | ... | all VPP interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG | | ... | links. Configure route entries for remote hosts IPv4 addresses | | ... | if required. | | ... | | ... | *Arguments:* | | ... | - tg_if1_ip4 - IP address of TG interface1. Type: string | | ... | - tg_if2_ip4 - IP address of TG interface2. Type: string | | ... | - dut1_if1_ip4 - IP address of DUT1 interface1. Type: string | | ... | - dut1_if2_ip4 - IP address of DUT1 interface1. Type: string | | ... | - remote_host1_ip4 - IP address of remote host1 (Optional). | | ... | Type: string | | ... | - remote_host2_ip4 - IP address of remote host2 (Optional). | | ... | Type: string | | ... | - remote_host_ip4_prefix - IP address prefix for host IP addresses | | ... | (Optional). Type: string or integer | | ... | | ... | *Example:* | | ... | | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 20.20.20.1 \| | | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 20.20.20.1 \ | | ... | \| 192.168.0.1 \| 192.168.0.2 \| 32 \| | | ... | | [Arguments] | ${tg_if1_ip4} | ${tg_if2_ip4} | ${dut1_if1_ip4} | | ... | ${dut1_if2_ip4} | ${remote_host1_ip4}=${NONE} | | ... | ${remote_host2_ip4}=${NONE} | ${remote_host_ip4_prefix}=${NONE} | | ... | | ${dut_tg_ip4_prefix}= | Set Variable | 24 | | ... | | Add arp on dut | ${dut_node} | ${dut_to_tg_if1} | ${tg_if1_ip4} | | ... | ${tg_to_dut_if1_mac} | | Add arp on dut | ${dut_node} | ${dut_to_tg_if2} | ${tg_if2_ip4} | | ... | ${tg_to_dut_if2_mac} | | ... | | Configure IP addresses on interfaces | ${dut_node} | ${dut_to_tg_if1} | | ... | ${dut1_if1_ip4} | ${dut_tg_ip4_prefix} | | Configure IP addresses on interfaces | ${dut_node} | ${dut_to_tg_if2} | | ... | ${dut1_if2_ip4} | ${dut_tg_ip4_prefix} | | ... | | Run Keyword Unless | '${remote_host1_ip4}' == '${NONE}' | | ... | Vpp Route Add | ${dut_node} | ${remote_host1_ip4} | | ... | ${remote_host_ip4_prefix} | ${tg_if1_ip4} | ${dut_to_tg_if1} | | Run Keyword Unless | '${remote_host2_ip4}' == '${NONE}' | | ... | Vpp Route Add | ${dut_node} | ${remote_host2_ip4} | | ... | ${remote_host_ip4_prefix} | ${tg_if2_ip4} | ${dut_to_tg_if2} | Configure IPv4 forwarding in 3-node circular topology | | [Documentation] | | ... | Set UP state on VPP interfaces in path on nodes in 3-node circular | | ... | topology. Get the interface MAC addresses and setup ARP on all VPP | | ... | interfaces. Setup IPv4 addresses with /24 prefix on DUT-TG links. | | ... | Configure IPv4 adresses with /30 prefix on DUT1-DUT2 link and set | | ... | routing on both DUT nodes with prefix /24 and next hop of neighbour | | ... | DUT interface IPv4 address. Configure route entries for remote hosts | | ... | IPv4 addresses if required. | | ... | | ... | *Arguments:* | | ... | - tg_if1_ip4 - IP address of TG interface1. Type: string | | ... | - tg_if2_ip4 - IP address of TG interface2. Type: string | | ... | - dut1_if1_ip4 - IP address of DUT1 interface1. Type: string | | ... | - dut1_if2_ip4 - IP address of DUT1 interface1. Type: string | | ... | - dut2_if1_ip4 - IP address of DUT2 interface1. Type: string | | ... | - dut2_if2_ip4 - IP address of DUT2 interface2. Type: string | | ... | - remote_host1_ip4 - IP address of remote host1 (Optional). | | ... | Type: string | | ... | - remote_host2_ip4 - IP address of remote host2 (Optional). | | ... | Type: string | | ... | - remote_host_ip4_prefix - IP address prefix for host IP addresses | | ... | (Optional). Type: string or integer | | ... | | ... | *Example:* | | ... | | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 1.1.1.1 \| 1.1.1.2 \ | | ... | \| 20.20.20.1 \| | | ... | \| Configure IPv4 forwarding in circular topology \ | | ... | \| 10.10.10.2 \| 20.20.20.2 \| 10.10.10.1 \| 1.1.1.1 \| 1.1.1.2 \ | | ... | \| 20.20.20.1 \| 192.168.0.1 \| 192.168.0.2 \| 32 \| | | ... | | [Arguments] | ${tg_if1_ip4} | ${tg_if2_ip4} | ${dut1_if1_ip4} | | ... | ${dut1_if2_ip4} | ${dut2_if1_ip4} | ${dut2_if2_ip4} | | ... | ${remote_host1_ip4}=${NONE} | ${remote_host2_ip4}=${NONE} | | ... | ${remote_host_ip4_prefix}=${NONE} | | ... | | ${dut_tg_ip4_prefix}= | Set Variable | 24 | | ${dut_link_ip4_prefix}= | Set Variable | 30 | | ... | | Add arp on dut | ${dut1_node} | ${dut1_to_tg} | ${tg_if1_ip4} | | ... | ${tg_to_dut1_mac} | | Add arp on dut | ${dut1_node} | ${dut1_to_dut2} | ${dut2_if1_ip4} | | ... | ${dut2_to_dut1_mac} | | Add arp on dut | ${dut2_node} | ${dut2_to_dut1} | ${dut1_if2_ip4} | | ... | ${dut1_to_dut2_mac} | | Add arp on dut | ${dut2_node} | ${dut2_to_tg} | ${tg_if2_ip4} | | ... | ${tg_to_dut2_mac} | | ... | | Configure IP addresses on interfaces | ${dut1_node} | ${dut1_to_tg} | | ... | ${dut1_if1_ip4} | ${dut_tg_ip4_prefix} | | Configure IP addresses on interfaces | ${dut1_node} | ${dut1_to_dut2} | | ... | ${dut1_if2_ip4} | ${dut_link_ip4_prefix} | | Configure IP addresses on interfaces | ${dut2_node} | ${dut2_to_dut1} | | ... | ${dut2_if1_ip4} | ${dut_link_ip4_prefix} | | Configure IP addresses on interfaces | ${dut2_node} | ${dut2_to_tg} | | ... | ${dut2_if2_ip4} | ${dut_tg_ip4_prefix} | | ... | | Vpp Route Add | ${dut1_node} | ${tg_if2_ip4} | ${dut_tg_ip4_prefix} | | ... | ${dut2_if1_ip4} | ${dut1_to_dut2} | | Vpp Route Add | ${dut2_node} | ${tg_if1_ip4} | ${dut_tg_ip4_prefix} | | ... | ${dut1_if2_ip4} | ${dut2_to_dut1} | | ... | | Run Keyword Unless | '${remote_host1_ip4}' == '${NONE}' | | ... | Vpp Route Add | ${dut1_node} | ${remote_host1_ip4} | | ... | ${remote_host_ip4_prefix} | ${tg_if1_ip4} | ${dut1_to_tg} | | Run Keyword Unless | '${remote_host2_ip4}' == '${NONE}' | | ... | Vpp Route Add | ${dut1_node} | ${remote_host2_ip4} | | ... | ${remote_host_ip4_prefix} | ${dut2_if1_ip4} | ${dut1_to_dut2} | | Run Keyword Unless | '${remote_host1_ip4}' == '${NONE}' | | ... | Vpp Route Add | ${dut2_node} | ${remote_host1_ip4} | | ... | ${remote_host_ip4_prefix} | ${dut1_if2_ip4} | ${dut2_to_dut1} | | Run Keyword Unless | '${remote_host2_ip4}' == '${NONE}' | | ... | Vpp Route Add | ${dut2_node} | ${remote_host2_ip4} | | ... | ${remote_host_ip4_prefix} | ${tg_if2_ip4} | ${dut2_to_tg}